76 Reply by Sluijsens

  • Sluijsens
  • Member
  • Offline
  • Registered: 2018-08-21
  • Posts: 8

Re: JD340 v.1.4

Gyroscope wrote:
Sluijsens wrote:
Gyroscope wrote:

Does anybody knows why light in the cockpit sometimes becomes darker and darker until it comes to totally black screen?
Is that bug or is it featrure? Cought that strange effect for several times but do not understand what it causes by ?

That is the Hypoxia effect, meaning your cabin pressure was not set correctly. You can enable/disable it in the settings (first tab iirc).

Thanks a lot ! It is a magic to get Hypoxia on runway during tacking off. smile
Nota bene: Hypoxia becomes if I load the plane with running engines. Why ?

Haha well that is magic indeed.
However, the docs say you shouldn't load the aircraft with the engine running option. If you do, then this might be one of the issues that occur.

Instead you should load without engines running and then use the hot start option that you see in the bottom left corner.

77 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD340 v.1.4

kamalskerba wrote:

Thank you for the update.

Quick question, is it better to delete the aircraft completely or simply copy over the aircraft, with the new files /

I did a complete reinstall, had to get my activation key and set up views again...... not a big deal just curious how others update.

thanks

K


A good way - just make new installation with another folder name, activate it and next - copy liveries and settings files to this new folder.

Please read a FAQ before you post a bug http://support.jardesign.org

78 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD340 v.1.4

IBE1001 wrote:

hello Mr Romanov.
I would like to put the icing on the cake in this beautiful plane, I do not know if it will be very complicated is to put a camera in the front train and with a button in the cabin just like the 340 in real life so that you can see where the front wheel and tail in the ECAM2 go.
I remember that the Airbus 350 of FF in the version with the x-plane 10.50 worked and already in x-plane 11 does not work.
We well know that with the xcamera plugin you can put all the cameras you want, both inside and outside, but as I said at the beginning it would be a wonder to turn in the taxi that have more than 90 degrees.
Greetings.


We already done this, but delete. Sure, X-Plane have display camera in Plane Maker, but when we trying to use it - we get just terrible quality and the problem was - this camera not show any another objects, but pavement only. So, it was useless. I don't know about another way/tool to implement camera into display. Sadly, but as is for now.

Please read a FAQ before you post a bug http://support.jardesign.org

79 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD340 v.1.4

Gyroscope wrote:
Sluijsens wrote:
Gyroscope wrote:

Does anybody knows why light in the cockpit sometimes becomes darker and darker until it comes to totally black screen?
Is that bug or is it featrure? Cought that strange effect for several times but do not understand what it causes by ?

That is the Hypoxia effect, meaning your cabin pressure was not set correctly. You can enable/disable it in the settings (first tab iirc).

Thanks a lot ! It is a magic to get Hypoxia on runway during tacking off. smile
Nota bene: Hypoxia becomes if I load the plane with running engines. Why ?

Aircraft have own (custom) pressurisation system and default hypoxia settings should be disable for this case.

Please read a FAQ before you post a bug http://support.jardesign.org

80 Reply by Gyroscope

  • Gyroscope
  • New member
  • Offline
  • Registered: 2021-08-09
  • Posts: 3

Re: JD340 v.1.4

J.A.Romanov wrote:
Gyroscope wrote:
Sluijsens wrote:

That is the Hypoxia effect, meaning your cabin pressure was not set correctly. You can enable/disable it in the settings (first tab iirc).

Thanks a lot ! It is a magic to get Hypoxia on runway during tacking off. smile
Nota bene: Hypoxia becomes if I load the plane with running engines. Why ?

Aircraft have own (custom) pressurisation system and default hypoxia settings should be disable for this case.

Well I would disable it,  but I have not found where is it ?

81 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD340 v.1.4

First tab of X-Plane settings as I remember

Please read a FAQ before you post a bug http://support.jardesign.org

82 Reply by peikai

  • peikai
  • New member
  • Offline
  • Registered: 2015-04-27
  • Posts: 4

Re: JD340 v.1.4

Hello...

FLOOD IT - Main Panel is still not working.
Its a bit annoying, if you take night flights.
Does anyone have the same issue?

Hope this can be fixed soon

Thank you

83 Reply by jcdp

  • jcdp
  • Member
  • Offline
  • Registered: 2016-03-08
  • Posts: 380

Re: JD340 v.1.4

peikai wrote:

Hello...

FLOOD IT - Main Panel is still not working.
Its a bit annoying, if you take night flights.
Does anyone have the same issue?

Hope this can be fixed soon

Thank you


Hi
Could you tell what you mean by "main panel" and by "not working ".
Explanations could make your question understandable .
Regards

jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

84 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD340 v.1.4

peikai wrote:

Hello...

FLOOD IT - Main Panel is still not working.
Its a bit annoying, if you take night flights.
Does anyone have the same issue?

Hope this can be fixed soon

Thank you


Have it worked well. So, please check:
1. Aircraft is powered
2. X-Plane Graphic settings -> Visual Effects is set to High or Maximum (HDR should be ON with this settings)

Please read a FAQ before you post a bug http://support.jardesign.org

85 Reply by peikai

  • peikai
  • New member
  • Offline
  • Registered: 2015-04-27
  • Posts: 4

Re: JD340 v.1.4

Perfect! That worked very well!!!

What an awesome COCKPIT !!! Love it!

Thank you, Romanov

86 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD340 v.1.4

Version 1.2 140821 what new:
+ PFD, ND, EWD, SYS displays 2D widgets add
+ AP disconnect indication improved
+ add command for AP takeover button
+ mouse wheel manipulators included
+ central landing gear brake hoses 3D model fixed
+ ND brightness manipulator fixed

Please read a FAQ before you post a bug http://support.jardesign.org

87 Reply by peikai

  • peikai
  • New member
  • Offline
  • Registered: 2015-04-27
  • Posts: 4

Re: JD340 v.1.4

Thanks for the updates... much appreciated!!!

88 Reply by coolgovind180

  • coolgovind180
  • Member
  • Offline
  • Registered: 2020-10-01
  • Posts: 6

Re: JD340 v.1.4

2D pop ups appear with blank screen having horizontal lines..please check.[

89 Reply by biddy31

  • biddy31
  • New member
  • Offline
  • From: France
  • Registered: 2017-07-10
  • Posts: 2

Re: JD340 v.1.4

I have the same problem as coolgovind180 with 2D pop-ups

Post's attachments

Attachment icon Capture XP11 JAR A340-500.JPG 103.64 kb, 43 downloads since 2021-08-16 

90 Reply by _al_ (edited by _al_ 2021-08-16 11:04:55)

  • _al_
  • Member
  • Offline
  • Registered: 2021-08-16
  • Posts: 6

Re: JD340 v.1.4

The load capacity in terms of passengers for this plane is representative of which configuration? The MCDU Menu, under load and fuel, shows a MAX value for passengers  = 250 that seems far below what could be expected.
Within the 340_JARDesign folder can be found a file "type340.txt" where PAX = 313, but there's a further set of data with 250 PAX only applicable to MSN0912, what plane that is?
Official Airbus data (https://www.airbus.com/aircraft/previou … 0-500.html) show typical seating  in the range 270-310 with max seating at 440. Therefore limiting at 250 PAX seems quite limitative, at least for players who like to use realistic data. Would be possible to provide better context to that 250 PAX limit or to lift it?

Anyway, had a look in the cabin of the JARDesign A345 model, there are 250 seats (jumpseats excluded).

91 Reply by Lumpi12524

  • Lumpi12524
  • New member
  • Offline
  • Registered: 2021-08-16
  • Posts: 2

Re: JD340 v.1.4

Hallo, ich habe ein Problem bei Start und Landung. Ab einer bestimmten Geschwindigkeit lässt sich das Flugzeug nicht mehr kontrollieren. Ich komme ständig von der Start und Landebahn ab. Es fängt an zu schlingern. Das Bugrad reagiert auch ziemlich langsam. Ich benutze den Airbus Stick von Thrustmaster. Hat irgendjemand eine Idee.

Hello, I have a problem with takeoff and landing. Above a certain speed, the aircraft can no longer be controlled. I keep getting off the runway. It starts to lurch. The nose wheel is also quite slow to respond. I use the Thrustmaster Airbus Stick. Does anyone have an idea?

92 Reply by martin0812

  • martin0812
  • New member
  • Offline
  • Registered: 2019-06-26
  • Posts: 2

Re: JD340 v.1.4

Hi
weired issue. I updated (new installation). Old version worked perfectly well, the update does not let me switch on the batteries. I can connect the GPU, but the middle part of the overhead panel does not let me switch any button. On the left or right side (still overhead) I can switch buttons - but of course without switching on the batteries this leads nowhere. Also the MCDU setting panel is not working without the batteries (if there is a solution there to find).
Any ideas?

93 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD340 v.1.4

martin0812 wrote:

Hi
weired issue. I updated (new installation). Old version worked perfectly well, the update does not let me switch on the batteries. I can connect the GPU, but the middle part of the overhead panel does not let me switch any button. On the left or right side (still overhead) I can switch buttons - but of course without switching on the batteries this leads nowhere. Also the MCDU setting panel is not working without the batteries (if there is a solution there to find).
Any ideas?

Look like something special. I am not get mass reports about this. Please reinstall aircraft and if no luck - contact me Skype j.a.romanov

Please read a FAQ before you post a bug http://support.jardesign.org

94 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD340 v.1.4

Lumpi12524 wrote:

Hallo, ich habe ein Problem bei Start und Landung. Ab einer bestimmten Geschwindigkeit lässt sich das Flugzeug nicht mehr kontrollieren. Ich komme ständig von der Start und Landebahn ab. Es fängt an zu schlingern. Das Bugrad reagiert auch ziemlich langsam. Ich benutze den Airbus Stick von Thrustmaster. Hat irgendjemand eine Idee.

Hello, I have a problem with takeoff and landing. Above a certain speed, the aircraft can no longer be controlled. I keep getting off the runway. It starts to lurch. The nose wheel is also quite slow to respond. I use the Thrustmaster Airbus Stick. Does anyone have an idea?


Any details about "certain speed" and screenshots of PFD+FCU or Log file. So, need more details, please.

Please read a FAQ before you post a bug http://support.jardesign.org

95 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD340 v.1.4

coolgovind180 wrote:

2D pop ups appear with blank screen having horizontal lines..please check.[

Get reports like this, but have not this issue on out test computers. So, look like I need someone in Skype who have this bug to check conditions, settings and so on. My Skype is j.a.romanov

Please read a FAQ before you post a bug http://support.jardesign.org

96 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD340 v.1.4

_al_ wrote:

The load capacity in terms of passengers for this plane is representative of which configuration? The MCDU Menu, under load and fuel, shows a MAX value for passengers  = 250 that seems far below what could be expected.
Within the 340_JARDesign folder can be found a file "type340.txt" where PAX = 313, but there's a further set of data with 250 PAX only applicable to MSN0912, what plane that is?
Official Airbus data (https://www.airbus.com/aircraft/previou … 0-500.html) show typical seating  in the range 270-310 with max seating at 440. Therefore limiting at 250 PAX seems quite limitative, at least for players who like to use realistic data. Would be possible to provide better context to that 250 PAX limit or to lift it?

Anyway, had a look in the cabin of the JARDesign A345 model, there are 250 seats (jumpseats excluded).

This is very good question! Is it may be what A340-542 may have less than 270 seats? Why not? At least this specification allow this https://www.hifly.aero/public/uploads/2 … CS-TFX.pdf

For different time period the same MSN may fly for different Airliners who may have different seats number.

As example - this is the same MSN aircraft:

Kingfisher Airlines as VT-VJE
Hi Fly 2009 as CS-TFX
Arik Air 2009-2015 as CS-TFX
Hi Fly 2015-2018 as CS-TFX

Please read a FAQ before you post a bug http://support.jardesign.org

97 Reply by _al_

  • _al_
  • Member
  • Offline
  • Registered: 2021-08-16
  • Posts: 6

Re: JD340 v.1.4

J.A.Romanov wrote:

This is very good question! Is it may be what A340-542 may have less than 270 seats? Why not? At least this specification allow this https://www.hifly.aero/public/uploads/2 … CS-TFX.pdf

For different time period the same MSN may fly for different Airliners who may have different seats number.

As example - this is the same MSN aircraft:

Kingfisher Airlines as VT-VJE
Hi Fly 2009 as CS-TFX
Arik Air 2009-2015 as CS-TFX
Hi Fly 2015-2018 as CS-TFX

And that's a really good answer, many thanks for those specifics. So now I know what I'm flying, will choose routes where this luxury liner fits better!

98 Reply by Lumpi12524 (edited by Lumpi12524 2021-08-18 12:50:30)

  • Lumpi12524
  • New member
  • Offline
  • Registered: 2021-08-16
  • Posts: 2

Re: JD340 v.1.4

@Romanov, habe einige Bilder vor und während des Startes. Ich habe auch noch zwei Videos von der Landung. Aber irgendwie bekomme ich die hier nicht hoch geladen. Ich melde mich über Support.


@Romanov, got some pictures before and during the launch. I also have two videos from the landing. But somehow I don't get this uploaded here. I will contact the support.

99 Reply by edu2703

  • edu2703
  • Member
  • Offline
  • Registered: 2021-03-28
  • Posts: 6

Re: JD340 v.1.4

When will the V/S knob bug be fixed?

When using replay mode, this knob starts clicking and rotating on its own. And it keeps happening even after exiting replay mode, making the button unusable, not to mention the annoying noise it makes.

100 Reply by leonelleymonie

  • leonelleymonie
  • New member
  • Offline
  • Registered: 2017-03-18
  • Posts: 2

Re: JD340 v.1.4

biddy31 wrote:

I have the same problem as coolgovind180 with 2D pop-ups

Same problems as other forum members, the popup does not show an image, only in black.