1 Topic by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Topic: XP11.50 JD330 v.4.2

http://jardesign.org/forum/img/m/22/t/p1e57cq5ln9odvjslepct41o5h3.png

JD330 for X-Plane 11.50

What new:

v.4.2R1
+ BAT indication on overhead panel fixed
+ Special points drawing on ND (on curved pathline) fixed
+ Chrono work fixed
+ Clock reworked
+ Alt CNSTRs indication on PFD fixed
+ V/S FCU indication fixed
+ Coordinates on MCDU INIT page (wrong format fixed)
+ TCA Engine Master Switches Support improved
+ Profile altitude for alt CNSTR points recalculated
+ NPA approach calculation and indication improved
+ ILS Information on PFD fixed
+ MDA entering fixed

v.4.2R2
+ include hot fix for APU/ENG firetest sound

v.4.2R3
+ Target speed indication fixed for mach mode
+ Engines "can't shut down" issue fixed
+ PFD speed indication fixed

v.4.2R4
+ Baro indication on PFD fixed
+ CNSTR Alt indication on ND fixed
+ SPD <-> MACH switch logic improved
+ Track indication fixed on PFD & ND
+ Spd CNSTR logic fixed
+ mode reversion on done phase fixed

HOW TO INSTALL:

Download link for version 4.2.3:
http://jardesign.org/a330/download/inst … 0_4230.zip

Download link for version 4.2.4:
http://jardesign.org/a330/download/inst … 0_4240.zip

For macOS Catalina / BigSur users - please follow instruction:
http://jardesign.org/forum/viewtopic.php?pid=31110

Download link to updated CoPilot version:
http://jardesign.org/copilotdownload/JD-CPL-330.zip

Download link to updated Ground Handling plugin to be well-compatible with XP11.50
http://jardesign.org/forum/viewtopic.php?id=11824


HOW TO INSTALL:

Please not mix files with other version.

  - be sure, that you use X-Plane 11.41-11.53
  - copy unziped "JD330XP11" folder to ..\X-Plane 11\Aircraft\ folder
    (be sure, what you are not use nonEnglish symbols in aircraft installation path)
  - please visit download more fresh version of Ground Handling plugin (use link above). It work with JARDesign 330 without registration (for free). Please note what “Deluxe” version of this plugin (may work with other aircrafts) is payware.
  - start X-Plane 64 bit and open a330, activation window is going to show up
  - enter your serial key (use exist serial from "JD330 for X-Plane 11"), click NEXT and after a successful activation reopen aircraft via X-Plane menu
  - activation works well with both MAC/WIN 64 bit

If activation window not appear, there is 3 reasons may be for this -
- Check what you use computer under Admin mode.
- You use Windows 7 or 8 or 10. In this case, please install "Microsoft Visual C++ Redistributable 2010" pack http://www.microsoft.com/en-us/download … x?id=14632 , and also install more fresh JAVA.
- One of your installed X-Plane plugin (like SeaTraffic) can block activation windows. You can temporary remove your plugins one-by-one and check is activation window appear. Another (faster) way you can use - load Cessna 172, open X-Plane Menu->Plugins->Plugin Admin to disable ALL plugins, next - load JD320/330.

UPDATE YOU NAV DATA WITH FRESH CYCLE (if needed)
If you need to update your cycle, please use Aerosoft/Navigraph
- “JARDesign 330/330 Native format”
and put a new cycle to ../X-PLANE 11/Custom Data/GNS430/navdata/ folder
(create it if need)

If you use TCA Quadrant - please open X-Plane Settings -> Joystick and assign command jd - "TCA_MasterSwitch1ON" on your Master Switch 1 ON position. Next - Open MCDU MENU -> SETTINGS -> Page 2 and set ON your TCA option. Next - you can deassign "TCA_MasterSwitch1ON" command if need.

- you may post you opinion about this version, post what you like/unlike
- please attach your log.txt if Crash happen.

Please care about information what you will post here and try to determinate reason if issues happen  - sure, he interesting in aircraft test and troubles but want to avoid work with "pilot" issues.

Thank you!!!!

This is FREE update for users who own "JD330 for X-Plane 11" product.

Please read a FAQ before you post a bug http://support.jardesign.org

2 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11.50 JD330 v.4.2

Hotfix for APU/ENG firetest sound (apply it to ver 4.2R1)

Please put (replace) this .xpl files to /Aircraft/JD330XP11/plugins/330va/

Post's attachments

Attachment icon mac.xpl 818.56 kb, 341 downloads since 2021-04-20 

Attachment icon win.xpl 1.95 mb, 963 downloads since 2021-04-20 

Please read a FAQ before you post a bug http://support.jardesign.org

3 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11.50 JD330 v.4.2

reserve

Please read a FAQ before you post a bug http://support.jardesign.org

4 Reply by Creeper740

  • Creeper740
  • New member
  • Offline
  • Registered: 2021-04-18
  • Posts: 2

Re: XP11.50 JD330 v.4.2

I am having a problem with this plane. i just bought this and the engines wont shut down despite the engine leavers being down.

5 Reply by Makcimus

  • Makcimus
  • Makcimus
  • Member
  • Offline
  • Registered: 2020-01-20
  • Posts: 16

Re: XP11.50 JD330 v.4.2

Thanks JarDesign team, great job!

System: Core i9 11900F ~ 5,2Ghz , 32Gb DDR4 3200MHz, NVidia RTX3070Ti 8Gb, W10Pro. 64 bits, SSD 512Gb, HDD 4Tb
Monitor: Samsung SyncMaster S27A650D (1920x1080)
joystick: TrustMaster T.Flight Xotas X
Sim.: X-plane 11.55r1

6 Reply by jcdp

  • jcdp
  • Member
  • Offline
  • Registered: 2016-03-08
  • Posts: 380

Re: XP11.50 JD330 v.4.2

Hi
Thank you for this up date .

Everything works perfectly ....except engines which keep running with levers on shut down position ....
Any possible fix ?
Regards
jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

7 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11.50 JD330 v.4.2

About engines keep running - thanks for report - I should check this on my side again to understand a reason. We was not get this issue during tests, but will try again. I will inform.

Please read a FAQ before you post a bug http://support.jardesign.org

8 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11.50 JD330 v.4.2

jcdp wrote:

Hi
Thank you for this up date .

Everything works perfectly ....except engines which keep running with levers on shut down position ....
Any possible fix ?
Regards
jcdp


Creeper740 wrote:

I am having a problem with this plane. i just bought this and the engines wont shut down despite the engine leavers being down.

Hmm.. we just test this issue on 3 different computers - we can not get this. So, if possible - please call me via Skype j.a.romanov - we will check mason for this issue online, check possible reason include hardware affect (may be sone hardware switch control mixture or ignition and produce this issue).

Please read a FAQ before you post a bug http://support.jardesign.org

9 Reply by neb739

  • neb739
  • New member
  • Offline
  • Registered: 2020-01-10
  • Posts: 2

Re: XP11.50 JD330 v.4.2

i have an issue with the plane, i have a black square in the corner where the GPU and HOT START icons are, it goes when i turn off Xenviro

10 Reply by kdj0223

  • kdj0223
  • New member
  • Offline
  • Registered: 2021-04-19
  • Posts: 1

Re: XP11.50 JD330 v.4.2

Hello. Im using a330 4.2 version, I wonder when the speed limit bar will be created again in the pfd. (depend on flaps setting)

It was disappeared, after 4.0 version..

and I have some problem with autobrakes, spoiler,

I need to activate the approach mode of the fmgs so that the auto-brake or spoiler recognizes it and works when landing. But it often causes errors and sometimes it doesn't work. (not deployed and brakes) I hope the auto brake or spoiler will work when landing without fmgs setting. (I wish it can be rolled back in the old way, it works immediately ( wink )

11 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11.50 JD330 v.4.2

neb739 wrote:

i have an issue with the plane, i have a black square in the corner where the GPU and HOT START icons are, it goes when i turn off Xenviro

So, this texture of MCDU display in the left bottom corner draw by xEnviro. You may check this easy using X-Plane Menu->Plugins->xEnviro->On click to turn it On and next Off - you will see smooth increase of this texture transparent. I think xExviro take one of framebuffer what created by JD330 and draw it. Sure, old version of JD330 not do this, but new version was recreated for XP11.50 rules. May be xEnviro will be updated for 11.50 rules too and this issue will gone.

Please read a FAQ before you post a bug http://support.jardesign.org

12 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11.50 JD330 v.4.2

kdj0223 wrote:

Hello. Im using a330 4.2 version, I wonder when the speed limit bar will be created again in the pfd. (depend on flaps setting)

It was disappeared, after 4.0 version..

and I have some problem with autobrakes, spoiler,

I need to activate the approach mode of the fmgs so that the auto-brake or spoiler recognizes it and works when landing. But it often causes errors and sometimes it doesn't work. (not deployed and brakes) I hope the auto brake or spoiler will work when landing without fmgs setting. (I wish it can be rolled back in the old way, it works immediately ( wink )

Sure, you can contact me skype j.a.romanov - we will do flight together and will see what happen wrong

Please read a FAQ before you post a bug http://support.jardesign.org

13 Reply by jcdp (edited by jcdp 2021-04-19 20:50:24)

  • jcdp
  • Member
  • Offline
  • Registered: 2016-03-08
  • Posts: 380

Re: XP11.50 JD330 v.4.2

J.A.Romanov wrote:
jcdp wrote:

Hi
Thank you for this up date .

Everything works perfectly ....except engines which keep running with levers on shut down position ....
Any possible fix ?
Regards
jcdp


Creeper740 wrote:

I am having a problem with this plane. i just bought this and the engines wont shut down despite the engine leavers being down.

Hmm.. we just test this issue on 3 different computers - we can not get this. So, if possible - please call me via Skype j.a.romanov - we will check mason for this issue online, check possible reason include hardware affect (may be sone hardware switch control mixture or ignition and produce this issue).

Hi
Thanks for your answer .
I am going to re check hardware configuration and make new try .
If not solved I shall manage for calling you on skype .
Regards
jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

14 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11.50 JD330 v.4.2

jcdp wrote:
J.A.Romanov wrote:
jcdp wrote:

Hi
Thank you for this up date .

Everything works perfectly ....except engines which keep running with levers on shut down position ....
Any possible fix ?
Regards
jcdp


Creeper740 wrote:

I am having a problem with this plane. i just bought this and the engines wont shut down despite the engine leavers being down.

Hmm.. we just test this issue on 3 different computers - we can not get this. So, if possible - please call me via Skype j.a.romanov - we will check mason for this issue online, check possible reason include hardware affect (may be sone hardware switch control mixture or ignition and produce this issue).

Hi
Thanks for your answer .
I am going to re check hardware configuration and make new try .
If not solved I shall manage for calling you on skype .
Regards
jcdp


thank you, my friend!

Please read a FAQ before you post a bug http://support.jardesign.org

15 Reply by fred750

  • fred750
  • Member
  • Offline
  • Registered: 2019-11-16
  • Posts: 10

Re: XP11.50 JD330 v.4.2

hello from my tset flying
found 2 big probleam
1.apu fire test and engine test no sound
2.cabin crew no sound

16 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11.50 JD330 v.4.2

fred750 wrote:

hello from my tset flying
found 2 big probleam
1.apu fire test and engine test no sound
2.cabin crew no sound

So, please apply hotfix for APU/ENG firetest sound http://jardesign.org/forum/viewtopic.ph … 631#p39631

About FA sound - please select PA on radio panel and adjust PA volume

Please read a FAQ before you post a bug http://support.jardesign.org

17 Reply by fred750 (edited by fred750 2021-04-20 12:13:50)

  • fred750
  • Member
  • Offline
  • Registered: 2019-11-16
  • Posts: 10

Re: XP11.50 JD330 v.4.2

yes i using it from mcdu

18 Reply by fred750 (edited by fred750 2021-04-20 12:22:46)

  • fred750
  • Member
  • Offline
  • Registered: 2019-11-16
  • Posts: 10

Re: XP11.50 JD330 v.4.2

as you see my set
realy no any sound

19 Reply by rafalec (edited by rafalec 2021-04-20 14:28:11)

  • rafalec
  • Member
  • Offline
  • Registered: 2018-02-27
  • Posts: 15

Re: XP11.50 JD330 v.4.2

fred750 wrote:

hello from my tset flying
found 2 big probleam
1.apu fire test and engine test no sound
2.cabin crew no sound

Hello, same problem for me, sound correctly configured into MCDU and  Sound3D.

20 Reply by rjarret (edited by rjarret 2021-04-20 15:51:51)

  • rjarret
  • Member
  • Offline
  • Registered: 2020-07-10
  • Posts: 8

Re: XP11.50 JD330 v.4.2

Hi, plane is amazing, but when I hit UPDATE on the CPDL sim freezes. Tried different airports. Different flight phase (ground, crz, after landing, etc). Always freezes. Here is the latest LOG from when on the ground @ SAEZ on flight to SAWH.

21 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11.50 JD330 v.4.2

rafalec wrote:
fred750 wrote:

hello from my tset flying
found 2 big probleam
1.apu fire test and engine test no sound
2.cabin crew no sound

Hello, same problem for me, sound correctly configured into MCDU and  Sound3D.

So, please apply hotfix for APU/ENG firetest sound http://jardesign.org/forum/viewtopic.ph … 631#p39631

About FA sound - please select PA on radio panel and adjust PA volume

Please read a FAQ before you post a bug http://support.jardesign.org

22 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11.50 JD330 v.4.2

rjarret wrote:

Hi, plane is amazing, but when I hit UPDATE on the CPDL sim freezes. Tried different airports. Different flight phase (ground, crz, after landing, etc). Always freezes. Here is the latest LOG from when on the ground @ SAEZ on flight to SAWH.

Some part of users describe crash just after click Update button on DCDU. As you can see at Log.txt (just after crash happen) Metar data was readed/saved ok, but you may read xPilot plugin info in several strings after this. So, if you will remove xPilot plugin - crash will not happen and you will get metar info on your DCDU. JD320/330 not affect on xPilot plugin, but just send weather request to internet. It is may be what xPilot just intercept metar server answer and trying to parce it with no luck and generate CTD, I dont know, but guess only. Anyway, this issue may be solved on xPilot side and we ready to deal with xPilot developers if need.

Please read a FAQ before you post a bug http://support.jardesign.org

23 Reply by jcdp (edited by jcdp 2021-04-20 21:23:59)

  • jcdp
  • Member
  • Offline
  • Registered: 2016-03-08
  • Posts: 380

Re: XP11.50 JD330 v.4.2

Hi
About engines ...
After a try for recalibrating "yoke" I have no change when engines are shut down ... from outside view blades of turbines keep rotating ...
so I shall try to contact you on skype ..
regards
jcdp

Edit: Curiously this doesn't happen with A320 (same config )

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

24 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11.50 JD330 v.4.2

jcdp wrote:

Hi
About engines ...
After a try for recalibrating "yoke" I have no change when engines are shut down ... from outside view blades of turbines keep rotating ...
so I shall try to contact you on skype ..
regards
jcdp

Edit: Curiously this doesn't happen with A320 (same config )

So, from outside view blades of turbines keep rotating, but what about EPR and N1 indication on EWD?

Please read a FAQ before you post a bug http://support.jardesign.org

25 Reply by rafalec

  • rafalec
  • Member
  • Offline
  • Registered: 2018-02-27
  • Posts: 15

Re: XP11.50 JD330 v.4.2

J.A.Romanov wrote:
rafalec wrote:
fred750 wrote:

hello from my tset flying
found 2 big probleam
1.apu fire test and engine test no sound
2.cabin crew no sound

Hello, same problem for me, sound correctly configured into MCDU and  Sound3D.

So, please apply hotfix for APU/ENG firetest sound http://jardesign.org/forum/viewtopic.ph … 631#p39631

About FA sound - please select PA on radio panel and adjust PA volume

Many thanks