1 Topic by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Topic: XP11 JD330 v.3.1 r1, r2, r3

Version of a330 for X-Plane 11.

features:
+ X-Plane 11.30 ready
+ AirFMC plugin ready
+ JARDesign CoPilot plugin ready
+ macOS Mojave ready
+ some Aircraft/FMGS bugs and CTD fixed

r1 features:
+ in fact r1 is release candidate

r2 features:
+ default F/O voice is back to installation pack

r3 features:
+ METAR reading issue fixed
+ GPU button fixed
+ MDCU MENU Ground Handling operation fixed

about using with macOS Mojave:
Please open system preferences, security and privacy, accessibility, check X-Plane.

about using with AirFMC plugin:
Please wait and update to version 1.7 of this software if you use it

about using with JARDesign CoPilot plugin:
You can download and install it
http://jardesign.org/a330/download/inst … PL-330.zip
Setup and using manual already included. This plugin is a separate product by JARDesign, work with JD330 for free. Voice recognition function execute by your computer OS (Win 10 or MAC OS). CoPilot plugin just use it. So, voice recognition ability and quality depend of your OS settings and hardware. Speech quality also depend of your installed text-to-speech voices. This plugin will not work with non-English version of your OS. You should setup and check your English voice recognition on Windows 10 or Mac BEFORE this plugin installation.

!!! no X-Plane plugins/330/ menu exist more, please set command jd/fmgs/CommandShowMcdu for some keyboard key and use MCDU MENU to operate ground handling.

HOW TO INSTALL / UPDATE:

Please not mix files with other version.
Download link
http://jardesign.org/a330/download/inst … 11_313.zip

Please be sure what you have actual version of Ground Handling plugin to be well-compatible with XP11
Download link: http://jardesign.org/forum/viewtopic.php?id=4133

  - be sure, that you use X-Plane 11.30
  - copy unziped "JD330XP11" folder to ..\X-Plane 10\Aircraft\ folder
    (be sure, what you are not use nonEnglish symbols in aircraft installation path)
  - please visit download more fresh version of Ground Handling plugin. It work with JARDesign 330 without registration (for free). Please note what “Deluxe” version of this plugin (may work with other aircrafts) is payware.
  - start X-Plane 64 bit and open a330, activation window is going to show up
  - enter your serial key (use exist serial from "JD330 for X-Plane 11"), click NEXT and after a successful activation reopen aircraft via X-Plane menu
  - activation works well with both MAC/WIN 64 bit

If activation window not appear, there is 3 reasons may be for this -
- Check what you use computer under Admin mode.
- You use Windows 7 or 8 or 10. In this case, please install "Microsoft Visual C++ Redistributable 2010" pack http://www.microsoft.com/en-us/download … x?id=14632 , and also install more fresh JAVA.

UPDATE YOU NAV DATA WITH FRESH CYCLE (if needed)
a330 use NavData from
../X-PLANE 11/Custom Data/GNS430/navdata/ folder
if not find there – will try to read it from
../X-PLANE 11/Aircraft/330_JARDesign/_navdata/
If you need update your cycle, please use Aerosoft/Navigraph
- “JARDesign a320/330 Native format” or (the same in fact)
- “XPLANE_GNS430_777WORLDLINER_FF757PROF_NATIVE”
and put new cycle to ..X-PLANE 10/Custom Data/navdata/ folder

- you may post you opinion about this version, post what you like/unlike
- please post your log.txt + x-life.dmp if Crash happen and you are on Windows.

Thank you!!!!

This is FREE update for users who own "JD330 for X-Plane 11" product.

Please read a FAQ before you post a bug http://support.jardesign.org

2 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11 JD330 v.3.1 r1, r2, r3

reserved

Please read a FAQ before you post a bug http://support.jardesign.org

3 Reply by Darko24

  • Darko24
  • Member
  • Offline
  • Registered: 2017-04-11
  • Posts: 169

Re: XP11 JD330 v.3.1 r1, r2, r3

Sorry JAR, but where is my LINDA in this version sad

My setup: Windows 10 (64-bit), Z490 AORUS PRO AX, INTEL i7 10700k, 32GB DDR4 RAM, NVIDIA Geforce GTX 2070S 8GB
X-Plane 11.55, X-Plane12RC2, Flight PRO joke, Logitech panels
My Fleet:  JD320-V3.8R1  with copilot, JD330-V4.4B3 with copilot, ZIBO 737-800X,
Utilities: X-LIFE Deluxe verversion 4.30 latest, FMcar latest, GHD ver. latest, X Camera,BSS JAR A320 V4,Better pushback

4 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11 JD330 v.3.1 r1, r2, r3

Darko24 wrote:

Sorry JAR, but where is my LINDA in this version sad

Please follow about using with JARDesign CoPilot plugin: in description

Please read a FAQ before you post a bug http://support.jardesign.org

5 Reply by Darko24

  • Darko24
  • Member
  • Offline
  • Registered: 2017-04-11
  • Posts: 169

Re: XP11 JD330 v.3.1 r1, r2, r3

J.A.Romanov wrote:

Please follow about using with JARDesign CoPilot plugin: in description

THX JAR. I was so happy of the new version that I see through the instructions. Once again, thank you.

My setup: Windows 10 (64-bit), Z490 AORUS PRO AX, INTEL i7 10700k, 32GB DDR4 RAM, NVIDIA Geforce GTX 2070S 8GB
X-Plane 11.55, X-Plane12RC2, Flight PRO joke, Logitech panels
My Fleet:  JD320-V3.8R1  with copilot, JD330-V4.4B3 with copilot, ZIBO 737-800X,
Utilities: X-LIFE Deluxe verversion 4.30 latest, FMcar latest, GHD ver. latest, X Camera,BSS JAR A320 V4,Better pushback

6 Reply by jcdp (edited by jcdp 2018-12-19 19:05:02)

  • jcdp
  • Member
  • Offline
  • Registered: 2016-03-08
  • Posts: 380

Re: XP11 JD330 v.3.1 r1, r2, r3

Hi Eugeny

Thanks for the update
Works fine .
But even with a chosen RNAV approach LINDA automatically pushes the "LS" knob so I have to deactivate it and push "APPR" knob for RNAV landing … but now it works correctly .
Can we expect the right choice from LINDA depending on ILS or RNAV approach and landing in the future ?


Anyway thanks for this Copilot addon


jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

7 Reply by Wumsel

  • Wumsel
  • New member
  • Offline
  • Registered: 2017-12-03
  • Posts: 1

Re: XP11 JD330 v.3.1 r1, r2, r3

J.A.Romanov wrote:

features:
+ AirFMC plugin ready

Nice to hear that AirFMC should work again from this version on.
But it doesn't work for me yet.

8 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11 JD330 v.3.1 r1, r2, r3

Wumsel wrote:
J.A.Romanov wrote:

features:
+ AirFMC plugin ready

Nice to hear that AirFMC should work again from this version on.
But it doesn't work for me yet.

about using with AirFMC plugin:
Please wait and update to version 1.7 of this software if you use it

1.7 !!!

I am in contact with Joao Cabral, we can expect it soon.

Please read a FAQ before you post a bug http://support.jardesign.org

9 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11 JD330 v.3.1 r1, r2, r3

jcdp wrote:

Can we expect the right choice from LINDA depending on ILS or RNAV approach and landing in the future ?

I will discuss this with she and with our script autor too. Thanks for this note!

Please read a FAQ before you post a bug http://support.jardesign.org

10 Reply by Homer.Simpson

  • Homer.Simpson
  • Privileged
  • Offline
  • From: EDDV, Germany
  • Registered: 2015-01-22
  • Posts: 522

Re: XP11 JD330 v.3.1 r1, r2, r3

Thanks for the new Version. Hope to find some time to test it soon. Unfortunately I wasn‘t able to to test the Beta as much as I wanted..

11 Reply by ervo

  • ervo
  • New member
  • Offline
  • Registered: 2017-11-26
  • Posts: 2

Re: XP11 JD330 v.3.1 r1, r2, r3

Thanks for the update !
But: is it possible that there is no copilot voice anymore ( I don't use the Linda plugin) ?

12 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11 JD330 v.3.1 r1, r2, r3

ervo wrote:

Thanks for the update !
But: is it possible that there is no copilot voice anymore ( I don't use the Linda plugin) ?

Did you install it as described in instruction?

Please read a FAQ before you post a bug http://support.jardesign.org

13 Reply by hermannk1

  • hermannk1
  • Member
  • Offline
  • Registered: 2018-02-19
  • Posts: 8

Re: XP11 JD330 v.3.1 r1, r2, r3

Hi

I downloaded and installed this version 3.1R1 today and activated with no problems.

Problem though is that all co-pilot call outs are gone.  No "start engine", "V1", "rotate" etc.  Deathly silence.
I also own the J320 and it works fine at this stage.

Any ideas?

14 Reply by hermannk1

  • hermannk1
  • Member
  • Offline
  • Registered: 2018-02-19
  • Posts: 8

Re: XP11 JD330 v.3.1 r1, r2, r3

Not all of us want to use the co-pilot Linda plugin.  I for one like to do everything myself.  OK, I know that is not how it is done, but after all this is a sim.  I don't see this as an update.  Rather a downdate.

ervo wrote:

Thanks for the update !
But: is it possible that there is no copilot voice anymore ( I don't use the Linda plugin) ?

15 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11 JD330 v.3.1 r1, r2, r3

hermannk1 wrote:

Not all of us want to use the co-pilot Linda plugin.  I for one like to do everything myself.  OK, I know that is not how it is done, but after all this is a sim.  I don't see this as an update.  Rather a downdate.

ervo wrote:

Thanks for the update !
But: is it possible that there is no copilot voice anymore ( I don't use the Linda plugin) ?

In this case you just not need install new version.

Please read a FAQ before you post a bug http://support.jardesign.org

16 Reply by rafalec

  • rafalec
  • Member
  • Offline
  • Registered: 2018-02-27
  • Posts: 15

Re: XP11 JD330 v.3.1 r1, r2, r3

Thanks for this update but i need precision, do i lose the classic co-pilot's voices if i don't install co-pilot plugin ?
Thanks again for your work, happy christmas !

17 Reply by King Filip

  • King Filip
  • Member
  • Offline
  • Registered: 2018-12-22
  • Posts: 5

Re: XP11 JD330 v.3.1 r1, r2, r3

rafalec wrote:

Thanks for this update but i need precision, do i lose the classic co-pilot's voices if i don't install co-pilot plugin ?
Thanks again for your work, happy christmas !

I guess yes, because in base version of A330 v3.1 r1 there is no call outs for v1 or rotate.
Jar Iam a bit disappointed of this update expecting to be adjusted for XP11.30 there is still black smoke from the engines hmm

18 Reply by rafalec

  • rafalec
  • Member
  • Offline
  • Registered: 2018-02-27
  • Posts: 15

Re: XP11 JD330 v.3.1 r1, r2, r3

King Filip wrote:
rafalec wrote:

Thanks for this update but i need precision, do i lose the classic co-pilot's voices if i don't install co-pilot plugin ?
Thanks again for your work, happy christmas !

I guess yes, because in base version of A330 v3.1 r1 there is no call outs for v1 or rotate.
Jar Iam a bit disappointed of this update expecting to be adjusted for XP11.30 there is still black smoke from the engines hmm

Please JAR, restore the sounds of the co-pilot when not using co-pilot plugin.

19 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11 JD330 v.3.1 r1, r2, r3

Why not use prev version in this case?

Please read a FAQ before you post a bug http://support.jardesign.org

20 Reply by rafalec

  • rafalec
  • Member
  • Offline
  • Registered: 2018-02-27
  • Posts: 15

Re: XP11 JD330 v.3.1 r1, r2, r3

J.A.Romanov wrote:

Why not use prev version in this case?

because I would like to benefit from these improvements:
     + some Aircraft/FMGS bugs and CTD fixed

21 Reply by Son_of_Jorel

  • Son_of_Jorel
  • Member
  • Offline
  • Registered: 2015-02-15
  • Posts: 55

Re: XP11 JD330 v.3.1 r1, r2, r3

rafalec wrote:
King Filip wrote:
rafalec wrote:

Thanks for this update but i need precision, do i lose the classic co-pilot's voices if i don't install co-pilot plugin ?
Thanks again for your work, happy christmas !

I guess yes, because in base version of A330 v3.1 r1 there is no call outs for v1 or rotate.
Jar Iam a bit disappointed of this update expecting to be adjusted for XP11.30 there is still black smoke from the engines hmm

Please JAR, restore the sounds of the co-pilot when not using co-pilot plugin.

I also really would like the classic previous copilot voice guiding us through the flight while I'm doing all the work. Maybe Jar could keep that feature always but also have the copilot plugin as an option like now. Thanks.

22 Reply by SilvioRodrigues

  • SilvioRodrigues
  • Member
  • Offline
  • Registered: 2017-04-04
  • Posts: 9

Re: XP11 JD330 v.3.1 r1, r2, r3

Son_of_Jorel wrote:
rafalec wrote:
King Filip wrote:

I guess yes, because in base version of A330 v3.1 r1 there is no call outs for v1 or rotate.
Jar Iam a bit disappointed of this update expecting to be adjusted for XP11.30 there is still black smoke from the engines hmm

Please JAR, restore the sounds of the co-pilot when not using co-pilot plugin.

I also really would like the classic previous copilot voice guiding us through the flight while I'm doing all the work. Maybe Jar could keep that feature always but also have the copilot plugin as an option like now. Thanks.


I agree.

23 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: XP11 JD330 v.3.1 r1, r2, r3

rafalec wrote:
J.A.Romanov wrote:

Why not use prev version in this case?

because I would like to benefit from these improvements:
     + some Aircraft/FMGS bugs and CTD fixed

This is possible. You may just take ../330/plugins/drf and ../330/plugins/fmgs folders from new version. On this stage - only this way, please.

Please read a FAQ before you post a bug http://support.jardesign.org

24 Reply by rafalec (edited by rafalec 2018-12-22 18:41:20)

  • rafalec
  • Member
  • Offline
  • Registered: 2018-02-27
  • Posts: 15

Re: XP11 JD330 v.3.1 r1, r2, r3

J.A.Romanov wrote:
rafalec wrote:
J.A.Romanov wrote:

Why not use prev version in this case?

because I would like to benefit from these improvements:
     + some Aircraft/FMGS bugs and CTD fixed

This is possible. You may just take ../330/plugins/drf and ../330/plugins/fmgs folders from new version. On this stage - only this way, please.

Cool, good news, many thanks.

25 Reply by Beikirch

  • Beikirch
  • New member
  • Offline
  • Registered: 2017-01-28
  • Posts: 2

Re: XP11 JD330 v.3.1 r1, r2, r3

Hello
Thank you for the updated A330. But i have a problem, i have no mcdu and no fmc. Can anyone help me,please.