Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
There is no longer a plugin menu. All settings are accessed from the MCDU. This also applies to ground handling when calling service vehicles, etc.
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Beerbog wrote:
I loaded the A/C again today and couldn't get rid of the pink windscreens. I cant disable the rain effects (suggested in another post) in the A330 menu as it is missing from the plug in menu.
Hi
I think you missed the information ,written in red, in the first post (#1) .
jcdp
I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Downloaded last version 3 beta 4 and had a complete flight from LFMN to DTTJ with Tunisair livery (as the line exists in real life).
Great flight from cold and dark to landing and securing the aircraft.
I noticed any problem, except the bird occasionally wanders off the NAV course during cruise.
She also seems floating sometimes in the air from left to right and right to left, as taken by violent turbulences (but there wasn't any turbulences, because the problem stops immediatly when descending). I never noticed such "behaviour" by flying with the 2 version wich is this last stable version of A330.
Except this kind of problem, this bird is really amazing !
May I suggest to implement more pop-up screens if possible ? It should be more greater.
Thanks to JAR designers for all this perfect work, and for all to be done... 
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Hello, just flew LSGG / LFBD with beta 4. Nothing to report particular everything went well since dark and cold. The plane is very stable even with wind at 60 knots at 26000 feet. Great work beautiful aircraft and thank you to the JAR team. Keep improving ...
windows 10 - PC ASUS ROG G752 - GTX 1060 6go - 24 go RAM - A320 et A330 JAR - X PLANE 10.50 - X PLANE 11.02
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Hi
Flying from DTTJ to LEMG , everything was fine up to climbing .
After a while all buttons became inactive ... no possibility to change altitude ,turn off landing lights, to set std pressure ...
and to set a target altitude for starting descent ...
So I stopped X-Plane ...
(on other previous flights this also happened ...
jcdp
Post's attachments
fmgs.zip 150 b, 115 downloads since 2018-02-19
Log.zip 24.76 kb, 222 downloads since 2018-02-19
I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
jcdp wrote:
Hi
Flying from DTTJ to LEMG , everything was fine up to climbing .
After a while all buttons became inactive ... no possibility to change altitude ,turn off landing lights, to set std pressure ...
and to set a target altitude for starting descent ...So I stopped X-Plane ...
(on other previous flights this also happened ...
jcdp
X-Plane has an issue where "focus" is lost while in the flight deck. To fix this, move the cursor to the top of the screen on the menu bar, click the bar with the mouse, and then the flight deck should be active again where your mouse works, i.e. you can manipulate knobs, press buttons, etc. This is a problem with other planes too....just FYI if this is the problem you're experiencing.
232 2018-02-19 21:50:50 (edited by jcdp 2018-02-19 21:53:08)
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Griff wrote:
jcdp wrote:Hi
Flying from DTTJ to LEMG , everything was fine up to climbing .
After a while all buttons became inactive ... no possibility to change altitude ,turn off landing lights, to set std pressure ...
and to set a target altitude for starting descent ...So I stopped X-Plane ...
(on other previous flights this also happened ...
jcdp
X-Plane has an issue where "focus" is lost while in the flight deck. To fix this, move the cursor to the top of the screen on the menu bar, click the bar with the mouse, and then the flight deck should be active again where your mouse works, i.e. you can manipulate knobs, press buttons, etc. This is a problem with other planes too....just FYI if this is the problem you're experiencing.
Hi
Many thanks for your quick answer .
Best regards
jcdp
PS: sorry but I did not catch "FYI"
I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
jcdp wrote:
Griff wrote:jcdp wrote:Hi
Flying from DTTJ to LEMG , everything was fine up to climbing .
After a while all buttons became inactive ... no possibility to change altitude ,turn off landing lights, to set std pressure ...
and to set a target altitude for starting descent ...So I stopped X-Plane ...
(on other previous flights this also happened ...
jcdp
X-Plane has an issue where "focus" is lost while in the flight deck. To fix this, move the cursor to the top of the screen on the menu bar, click the bar with the mouse, and then the flight deck should be active again where your mouse works, i.e. you can manipulate knobs, press buttons, etc. This is a problem with other planes too....just FYI if this is the problem you're experiencing.
Hi
Many thanks for your quick answer .
Best regards
jcdpPS: sorry but I did not catch "FYI"
maybe ..."For Your Information"
I7-8700k - MSi Z370 Plus Sli - Galax RTX 2070 - G.Skill 16gb 3000mhz - SSD MX 500 -500gb, Hd 1tb Seagate, HD 2tb Wd - WC Corsair H100iv2 - Corsair RM 650 - Monitor 24'' Asus
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Yes, "for your information." Thanks.
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Good evening... I Just crashed on putting the arrival on a330 v3 b4.. here the logs:
Thanks
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
beta 5 just posted.
Need to reinstall full aircraft.
New feature add (if someone really need this) - instant flightplan generator:
As example:
Enter from-to like LFPG/EDDH at Init A page and select R1
Select <REQUEST at next page to generate flightplan
There is a MANY rules to generate plans, this feature use just one of them.
Sure, you may continue to use service like http://rfinder.asalink.net/free/
or prepare plan yourself or use X-Life for this or enter it manually
This is only one additional way..
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Griff wrote:
Yes, "for your information." Thanks.
Hi
Got it !
Thanks
jcdp
I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
I made a new complete flight from EDDS to LFML for another testing.
Nothing special to report. Everything worked well during the flight.
Except the same behaviour as reported above (post 230), i.e. the bird occasionally wanks and swings in the air like floating when in cruise. I'm sure it's not a question of turbulence, because the swing and dancing effect is regular from left to right and from right to left, and immediatly stops when descending at T/D.
Nothing else to report but I'd like to know if it occurred to others beta-testers.
Thanks to all of you and to JAR Team.
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Hello
The A330 is a very nice plane that gives me satisfaction.
But two problems:
1 / impossible to remove the discontinuity located after the airport of departure. Obligation of an SID.
NB: In the V2, it was possible and interesting to make "takeoff-landing loops"
2 / IMPORTANT : the A330 cannot follow the LNAV and VNAV parameters of the MCDU. As a result, the A330 loses AUTO-PILOT, speed, altitude, etc.
Here is a 7 minute video to show you the problems. Here : https://drive.google.com/file/d/107aXLK … sp=sharing
Flight LFSB (Basel-Mulhouse) - LFPO
RWY 33
SID: LUME6N
AIRAC: 1801 - January 2018.
Thank you for your attention. Best regards.
Peter (in French)
- J.A.Romanov
- Admin
- Offline
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Peter092 wrote:
Hello
The A330 is a very nice plane that gives me satisfaction.
But two problems:1 / impossible to remove the discontinuity located after the airport of departure. Obligation of an SID.
NB: In the V2, it was possible and interesting to make "takeoff-landing loops"2 / IMPORTANT : the A330 cannot follow the LNAV and VNAV parameters of the MCDU. As a result, the A330 loses AUTO-PILOT, speed, altitude, etc.
Here is a 7 minute video to show you the problems. Here : https://drive.google.com/file/d/107aXLK … sp=sharing
Flight LFSB (Basel-Mulhouse) - LFPO
RWY 33
SID: LUME6N
AIRAC: 1801 - January 2018.Thank you for your attention. Best regards.
Peter (in French)
So.. that was LFSB 33 LIMEN6 departure. I will check.
1. DISCO just try to show you what you cant flight this path. Your task is not "remove" it, but prepare good flight plan.
2. As I see, there is no SPD constrains for this SID. So, only way - set speed in selected mode for this kind of SID during departure.
Thanks for your info and video, so detailed.
Please read a FAQ before you post a bug http://support.jardesign.org
241 2018-02-20 13:11:32 (edited by dackar2 2018-02-20 13:12:42)
- dackar2
- Member
- Offline
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Hello can you confirm that for the moment there is no TRANS in the FMC and that the problem will be solved
Thank you for your attention. Best regards.
242 2018-02-20 13:45:31 (edited by MrGeeBee 2018-02-20 14:23:49)
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Beta 5:
1. (Minor glitch) You have to exit and restart X-Plane to get rid of the Rainshield after first activation. Reloading the aircraft is not good enough. (No big deal though.)
2. When in TOGA and then pulling back throttle to climb, the AP goes wild and sets the ATHR to TOGALK, even above the AF. Only way way is to disengage the ATHR, match the TOGA speed manually and reacttivate ATHR again.
3. At TOD sometimes, tuning in your ILS altitude, and the aircraft starts to decent at 8000 FPM. (Only happens sometimes, so I'm not sure how to reproduce yet, working on it.)
4. Also glitch with refueling, when calling only the Gasoline Truck from GHD no refuel window appear. If calling all things it appears.
(Video still processing on YT... https://youtu.be/9TMKOefAKCQ?list=PLEMT … Gkqy-rEc-j )
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
dackar2 wrote:
Hello can you confirm that for the moment there is no TRANS in the FMC and that the problem will be solved
Thank you for your attention. Best regards.
Yes, any statement on this would be appreciated. At what point in the beta process can we expect a complete MDCU with proper transition selection for the landing runway?
244 2018-02-20 14:30:06 (edited by dudleybrooke 2018-02-20 14:33:30)
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Crash when entering flightplan.
Additionally, I couldn't get the flightplan to load as a company route.
Post's attachments
fmgs.dmp 255.51 kb, 327 downloads since 2018-02-20
KSFOKATL.txt 109 b, 326 downloads since 2018-02-20
Log.txt 122.88 kb, 477 downloads since 2018-02-20
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Speedbrakes are without function. XP 11.11 / A330 V3beta5.
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
J.A.Romanov wrote:
Peter092 wrote:Hello
The A330 is a very nice plane that gives me satisfaction.
But two problems:1 / impossible to remove the discontinuity located after the airport of departure. Obligation of an SID.
NB: In the V2, it was possible and interesting to make "takeoff-landing loops"2 / IMPORTANT : the A330 cannot follow the LNAV and VNAV parameters of the MCDU. As a result, the A330 loses AUTO-PILOT, speed, altitude, etc.
Here is a 7 minute video to show you the problems. Here : https://drive.google.com/file/d/107aXLK … sp=sharing
Flight LFSB (Basel-Mulhouse) - LFPO
RWY 33
SID: LUME6N
AIRAC: 1801 - January 2018.Thank you for your attention. Best regards.
Peter (in French)
So.. that was LFSB 33 LIMEN6 departure. I will check.
1. DISCO just try to show you what you cant flight this path. Your task is not "remove" it, but prepare good flight plan.
2. As I see, there is no SPD constrains for this SID. So, only way - set speed in selected mode for this kind of SID during departure.Thanks for your info and video, so detailed.
Hi
The SID is LUME6N
See picture for contraint
Best regards
jcdp
Post's attachments
Capture d’écran (1).png 794.94 kb, 129 downloads since 2018-02-20
I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
dudleybrooke wrote:
Crash when entering flightplan.
Additionally, I couldn't get the flightplan to load as a company route.
Your FLP:
KSFO SID SYRAH Q128 JSICA DCT ILC DCT KD45S DCT KK39A DCT FSM DCT MEM DCT HUTCC DCT KNSAW DCT RUSSA STAR KATLYour FP in SkyVector:
KSFO SYRAH JSICA ILC KD45S KK39A FSM MEM HUTCC KNSAW RUSSA KATL
And in your Log:
FMGS: 553 : ICAO-format plan export to Dataref: KSFO SID NTELL DCT CABAB DCT KICHI DCT KATTS DCT KITTN DCT ROCCY DCT HASSL DCT TAHIB DCT DIXAN DCT MIRME DCT PNH DCT CRUSR DCT IRW DCT TUL DCT PLIED DCT LUKKY DCT ARG DCT ZESAM DCT KIMEL DCT SOPIE DCT BNA DCT LGC STAR KATL
FMGS: 596 : add Leg: I10,IF,CTEEE,33.620017,-84.651053,IOMO,275.0,11.8,2,4000,0,0,0,0,0,0
FMGS: 596 : add Leg: I10,CF,ZMANN,33.620169,-84.550981,0,IOMO,275.0,6.8,95.0,5.0,1,2700,0,0,0,0,2,0
FMGS: 596 : add Leg: I10,CF,RW10,33.620272,-84.447878,0,IOMO,275.0,1.7,95.0,5.2,1,1055,0,0,0,0,3,0
FMGS: 596 : add Leg: I10,CA,0,95.0,2,1400,0,0,0,0,0,0
FMGS: 596 : add Leg: I10,CF,SCARR,33.378639,-84.435069,2,ATL,185.0,15.0,185.0,15.0,2,3000,0,0,0,0,0,0
FMGS: 596 : add Leg: I10,HM,SCARR,33.378639,-84.435069,2, ,0.0,0.0,5.0,04.3,0,0,0,0,0,0,0,0,0
FMGS: 596 : MessageRed: Missed Leg: I10,HM,SCARR,33.378639,-84.435069,2, ,0.0,0.0,5.0,04.3,0,0,0,0,0,0,0,0,0248 2018-02-20 15:13:07 (edited by MrGeeBee 2018-02-20 15:15:11)
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Peter092 wrote:
Hello
The A330 is a very nice plane that gives me satisfaction.
But two problems:1 / impossible to remove the discontinuity located after the airport of departure. Obligation of an SID.
NB: In the V2, it was possible and interesting to make "takeoff-landing loops"2 / IMPORTANT : the A330 cannot follow the LNAV and VNAV parameters of the MCDU. As a result, the A330 loses AUTO-PILOT, speed, altitude, etc.
Here is a 7 minute video to show you the problems. Here : https://drive.google.com/file/d/107aXLK … sp=sharing
Flight LFSB (Basel-Mulhouse) - LFPO
RWY 33
SID: LUME6N
AIRAC: 1801 - January 2018.Thank you for your attention. Best regards.
Peter (in French)
Did the same flight, yes SID is needed (LUME6N) otherwise no problems with speed or AP out of Basel.
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
marcodressler wrote:
Speedbrakes are without function. XP 11.11 / A330 V3beta5.
Video, log, picture? For me they work fine.
Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests
Just some reflections, I might be totally off, but it feels like most, including myself, is used to the old version of the A330, which was more basic and now have moved up to a more advanced version and that is not as forgiving to the pilot. This is all good at least in my opinion, but I think it can also be very confusing if you have flown the more forgiving version a long time.
I don't claim that this is a fact, it's more of a reflection on what's going on.