76 Reply by airbus321ib

  • airbus321ib
  • New member
  • Offline
  • Registered: 2017-04-03
  • Posts: 1

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Good morning .
I have a problem I have downloaded the last update of the A320 and even the IRS, the route well introduced in the FMC, and the corresponding parameters, I do not see the speed or altitude of the waypoints in the FMC. Of course, the plane stopped. Could it be for the latest update of xplane 11, or why can it be?
A greeting and I await your news
Nicolas G.

Post's attachments

Attachment icon 20170405_142552new.jpg 10.6 mb, 196 downloads since 2017-04-05 

Attachment icon 20170405_142910new.jpg 9.41 mb, 181 downloads since 2017-04-05 

Attachment icon 20170405_142935new.jpg 11.37 mb, 178 downloads since 2017-04-05 

77 Reply by dimkzr (edited by dimkzr 2017-04-05 14:40:47)

  • dimkzr
  • dimkzr
  • Member
  • Offline
  • Registered: 2017-03-20
  • Posts: 65

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

airbus321ib wrote:

I have a problem I have downloaded the last update of the A320 and even the IRS, the route well introduced in the FMC, and the corresponding parameters, I do not see the speed or altitude of the waypoints in the FMC. Of course, the plane stopped. Could it be for the latest update of xplane 11, or why can it be?

You probably haven't filled fuel init page (FMC > INIT > right or left arrow to display second page):

http://jardesign.org/forum/img/m/4188/t/p1bcv8ou3db1d18bb2be15kl73h3.png
http://jardesign.org/forum/img/m/4188/t/p1bcv8pb2u6vodfv1hoc1udr1noia.png

P.S. You can take screenshots with X-Plane by pressing Shift+Spacebar. They'll be saved into YOUR-XP11-FOLDER\Output

78 Reply by fsjoe34

  • fsjoe34
  • Member
  • Offline
  • Registered: 2016-04-28
  • Posts: 8

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

My ground steering issue is solved. I had "Nosewheel Tiller" assigned on the large dial of my throttle and this overwrote the yaw signal from the joystick.

So far I can say that I like the XP11 quite a lot and it looks like the issues I had on XP10 are solved!

Glad to have my a320 back!

79 Reply by laohu314

  • laohu314
  • Member
  • Offline
  • Registered: 2016-01-03
  • Posts: 677

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

airbus321ib wrote:

Good morning .
I have a problem I have downloaded the last update of the A320 and even the IRS, the route well introduced in the FMC, and the corresponding parameters, I do not see the speed or altitude of the waypoints in the FMC. Of course, the plane stopped. Could it be for the latest update of xplane 11, or why can it be?
A greeting and I await your news
Nicolas G.

Please post your log.txt from this flight, otherwise no news...

iMac5K 27” (2015), i7 4GHz, OSX 10.14.6, 32GB, AMD M395X 4096MB, Saitek X52, TPM, Radio, Switch & Multi, TM MFD, XP11.35r1, FFA320v0.11.2-2305, ToLiSs A319 v1.3.3, JDA320 v3.4r1, JDA330 v3.2r1, XL v4_250719, FM v2.6r2,  GndHdg v.4.010719, Air Plugin v4.8.3,  FWL 2.7.19, 3jFPS-wizard, PI v2.73.06, NOAA v2.4.4, XSPs v2.75, XCL v1.37, BPB v0.47, SAM 1.1.0

80 Reply by thomas_99

  • thomas_99
  • Member
  • Offline
  • Registered: 2015-05-04
  • Posts: 235

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Hi !

nevzatolum wrote:

The plane shadow looks like a sawtooth.

That's because you are using NVidia Sourround for multiple monitor display.

If you set up a multimonitor in XP11 itself (without NVidia sourround) the shadows
are fine :-)

81 Reply by dimkzr

  • dimkzr
  • dimkzr
  • Member
  • Offline
  • Registered: 2017-03-20
  • Posts: 65

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

laohu314 wrote:

Please post your log.txt from this flight, otherwise no news...

I don't think it was a bug. Just a mistake on his side. Let him try my suggestion first.

82 Reply by MikeyOT (edited by MikeyOT 2017-04-06 07:46:54)

  • MikeyOT
  • Member
  • Offline
  • Registered: 2016-04-11
  • Posts: 5

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Apologies if someone has asked this before but I did search before posting this!

When I load the A320 (3.0r1) into X-Plane (11.0rc1) it appears to come with a tow truck.  I use your Ground Handling Deluxe and some of those vehicles drive through that tow truck as though it weren't there.  Then, when I "Call Tow" a second tow truck appears and drives itself into the same location as the original, occupying the same space.

I suspect that the tow truck that comes with the A320 is also the reason the A320 icons appear so small in the icon tiles in XP11.

How can I get rid of the tow truck?

83 Reply by marcelbrietzke (edited by marcelbrietzke 2017-04-06 18:42:01)

  • marcelbrietzke
  • Member
  • Offline
  • Registered: 2017-03-09
  • Posts: 19

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Dear JAR and Crew,

today i had some weird experience with the A320. I was testing 124th ATC plugin(not sure if this is conflicting)
Full documented on Video.
https://www.youtube.com/watch?v=fzHUgbFSs8o

First Error at 20:30 minute
Second Error at 23:35 minute watch to 25:00!!!
Last Error at 43:23

To mention i use custom soundpack!

Log file attached.

Post's attachments

Attachment icon Log.txt 1.17 mb, 314 downloads since 2017-04-06 

84 Reply by holman.donald

  • holman.donald
  • Member
  • Offline
  • From: Owen Sound, Ontario, Canada
  • Registered: 2015-06-04
  • Posts: 22

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Hummm, I am having a bit of trouble. The new R! version does not want to lock onto the route .
Has anyone else had this problem?
iMac (Retina 5K, 27-inch, Late 2015
4 GHz Intel Core i7
32 GB 1867 MHz DDR3
AMD Radeon R9 M395X 4096 MB
mac os 10.12.4
Xplane 11RC1 (64 bit)
X55 Saitek Pro Rhino Stick
X55 Saitek Rhino Throttle

85 Reply by laohu314

  • laohu314
  • Member
  • Offline
  • Registered: 2016-01-03
  • Posts: 677

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

MikeyOT wrote:

Apologies if someone has asked this before but I did search before posting this!

When I load the A320 (3.0r1) into X-Plane (11.0rc1) it appears to come with a tow truck.  I use your Ground Handling Deluxe and some of those vehicles drive through that tow truck as though it weren't there.  Then, when I "Call Tow" a second tow truck appears and drives itself into the same location as the original, occupying the same space.

I suspect that the tow truck that comes with the A320 is also the reason the A320 icons appear so small in the icon tiles in XP11.

How can I get rid of the tow truck?


I suspect that the first tow truck is part of the scenery you are at. You would have to "hide" or delete it from there using WED., for example.

iMac5K 27” (2015), i7 4GHz, OSX 10.14.6, 32GB, AMD M395X 4096MB, Saitek X52, TPM, Radio, Switch & Multi, TM MFD, XP11.35r1, FFA320v0.11.2-2305, ToLiSs A319 v1.3.3, JDA320 v3.4r1, JDA330 v3.2r1, XL v4_250719, FM v2.6r2,  GndHdg v.4.010719, Air Plugin v4.8.3,  FWL 2.7.19, 3jFPS-wizard, PI v2.73.06, NOAA v2.4.4, XSPs v2.75, XCL v1.37, BPB v0.47, SAM 1.1.0

86 Reply by laohu314

  • laohu314
  • Member
  • Offline
  • Registered: 2016-01-03
  • Posts: 677

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

holman.donald wrote:

Hummm, I am having a bit of trouble. The new R! version does not want to lock onto the route .
Has anyone else had this problem?
iMac (Retina 5K, 27-inch, Late 2015
4 GHz Intel Core i7
32 GB 1867 MHz DDR3
AMD Radeon R9 M395X 4096 MB
mac os 10.12.4
Xplane 11RC1 (64 bit)
X55 Saitek Pro Rhino Stick
X55 Saitek Rhino Throttle


I have the same machine except I use the Saitek X52. Please post your log.txt, otherwise it's not possible to help.

iMac5K 27” (2015), i7 4GHz, OSX 10.14.6, 32GB, AMD M395X 4096MB, Saitek X52, TPM, Radio, Switch & Multi, TM MFD, XP11.35r1, FFA320v0.11.2-2305, ToLiSs A319 v1.3.3, JDA320 v3.4r1, JDA330 v3.2r1, XL v4_250719, FM v2.6r2,  GndHdg v.4.010719, Air Plugin v4.8.3,  FWL 2.7.19, 3jFPS-wizard, PI v2.73.06, NOAA v2.4.4, XSPs v2.75, XCL v1.37, BPB v0.47, SAM 1.1.0

87 Reply by MikeyOT

  • MikeyOT
  • Member
  • Offline
  • Registered: 2016-04-11
  • Posts: 5

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

laohu314 wrote:
MikeyOT wrote:

Apologies if someone has asked this before but I did search before posting this!

When I load the A320 (3.0r1) into X-Plane (11.0rc1) it appears to come with a tow truck.  I use your Ground Handling Deluxe and some of those vehicles drive through that tow truck as though it weren't there.  Then, when I "Call Tow" a second tow truck appears and drives itself into the same location as the original, occupying the same space.

I suspect that the tow truck that comes with the A320 is also the reason the A320 icons appear so small in the icon tiles in XP11.

How can I get rid of the tow truck?


I suspect that the first tow truck is part of the scenery you are at. You would have to "hide" or delete it from there using WED., for example.


Haha!  I was just coming back on here to say exactly that.  I loaded the A320 at a different gate this time and there was no tow truck!  Thanks anyway laohu314! smile

88 Reply by ilankrt

  • ilankrt
  • Member
  • Offline
  • Registered: 2015-10-20
  • Posts: 774

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

holman.donald wrote:

Hummm, I am having a bit of trouble. The new R! version does not want to lock onto the route .
Has anyone else had this problem?
iMac (Retina 5K, 27-inch, Late 2015
4 GHz Intel Core i7
32 GB 1867 MHz DDR3
AMD Radeon R9 M395X 4096 MB
mac os 10.12.4
Xplane 11RC1 (64 bit)
X55 Saitek Pro Rhino Stick
X55 Saitek Rhino Throttle

You should make a short HD video so we can have a look at your problem. We have same hardware configuration so this problem can be easy reproduced ..

X-Plane 11.30r3 | iMac27 OSX Mojave 14.10.4, | Samsung ultra-wide screen 49-inch | Saitek equipment | MFG pedals |Gladiator Joystick | Plugins: GndHandling, RWC, SMP, SoundM, X-Life, BetterPushback, AutoGate, SoundMaxx, X-ATC-chatter, X-Camera | iPad 12.9, iPad Air 9.7  | Airliner: JAR A320/A330, FF A350XWB, FF B767, SSG B747-8 inter, Epic1000 new, TBM900  http://ilankrt1.blogspot.co.il

89 Reply by Acei

  • Acei
  • Member
  • Offline
  • Registered: 2015-05-26
  • Posts: 128

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Tried to do a flight from EIDW to LEMD this morning.  Got an SASL error after 30 mins.  Reset the SASL plugin and recovered the flight, but it happened again 10 mins later so had to abandon.

Post's attachments

Attachment icon debug.txt 117.96 kb, 257 downloads since 2017-04-07 

Attachment icon Log.txt 2.09 mb, 257 downloads since 2017-04-07 

90 Reply by lrpru29

  • lrpru29
  • Member
  • Offline
  • From: Usa
  • Registered: 2016-07-11
  • Posts: 11

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

I wanted to report that the cabin lights do not work for me. Specifically the regulator that is above the switch SYS radar and that is the "Flood LT NLP"
Please thank the solution

Womans in your town

91 Reply by dimkzr (edited by dimkzr 2017-04-07 16:23:23)

  • dimkzr
  • dimkzr
  • Member
  • Offline
  • Registered: 2017-03-20
  • Posts: 65

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

I would like to report two issues I have with JAR320r1


1. If you look on pedestal or behind in the cockpit (where passengers cabin is) FPS drops VERY noticeable. From ~40 to 20-15 for me. Even with the cockpit door closed.

I know it's probably because there's a lot of polygons back there. But I don't have this problem with the latest FlightFactor 757, and their pax cabin is also very detailed.


2. The lights in the cockpit are very dim! Displays are hard to read in sunny day. Dome light have almost zero effect at dawn/dusk. Illuminated buttons (like EXT PWR) are very dim, too. And yes, I have HDR enabled.

Could it possibly be that JAR still using "old" textures? Take a look please: http://developer.x-plane.com/2017/03/dr … -aircraft/

Here's my cockpit at midnight. Each and every light is at max/bright, dome included:

http://jardesign.org/forum/img/m/4188/t/p1bd4hjhku1bau1b0c1rfo1f3d101q3.png

92 Reply by Paddy

  • Paddy
  • Member
  • Offline
  • Registered: 2017-04-07
  • Posts: 10

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

simonbarget wrote:

I'm having an issue with AP and SASL. How do I post my log file?


Ok - I just did it!

So the problem is that I get an on screen SASL error message at the beginning of the flight and the autopilot goes crazy. Hoping you can help.


Got the same issue.Autopilot is going crazy

93 Reply by VMaximI (edited by VMaximI 2017-04-07 21:23:19)

  • VMaximI
  • New member
  • Offline
  • Registered: 2017-03-02
  • Posts: 2

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Разработчикам спасибо за прекрасную работу, но ложечка дегтя имеется.
При превышении максимальной скорости слетает SASL и пока скорость не вернется в допустимые пределы ошибка не пропадает. Прилагаю логи и видео.
https://youtu.be/1uQ0vfqZB1o
Кстати то-же самое происходит и при снижении скорости ниже минимально допустимой (приближении к сваливанию).

Post's attachments

Attachment icon debug.txt 24.2 kb, 206 downloads since 2017-04-07 

Attachment icon Desktop 04.08.2017 - 00.17.31.01.png 2.04 mb, 170 downloads since 2017-04-07 

Attachment icon Desktop 04.08.2017 - 00.18.42.02.png 2.14 mb, 145 downloads since 2017-04-07 

Attachment icon Desktop 04.08.2017 - 00.18.50.03.png 2.15 mb, 149 downloads since 2017-04-07 

Attachment icon Log.txt 375.42 kb, 317 downloads since 2017-04-07 

OS Win7,  Intel Core i5-6500 3.20GHz, DDR4 16GB 2133MHz, nVidia GTX-970 4096 MB, XP11v.pb13, A320v.3.0b4, Python Interface, XP NOAA Weather v2.4.4, XPUIPC, BLU-fx, EFASS XPSM, FlyWithLua.

94 Reply by tiger6k

  • tiger6k
  • Member
  • Offline
  • Registered: 2015-05-23
  • Posts: 25

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

The A320 icon in plane select menu is still incorrect.  It looks pretty bad compared to all the other aircraft that are doing it correctly.

"Finally, third party aircraft authors: please use our icon generator and don’t just splat a screen-shot into the X-Plane 11 icons. The aircraft picker is going to look terrible if it turns into a tile grid of screenshots."  - Ben Supnik from Laminar.

95 Reply by asgar (edited by asgar 2017-04-08 09:14:12)

  • asgar
  • New member
  • Offline
  • Registered: 2016-11-26
  • Posts: 2

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Hi there,

i have a new issue with the JAR320 rc1, which did not happen on older beta versions.

The cabin pressurization is not working correctly. X-Plane reads a different cabin alt then the Pressurization Screen (where everything is fine).

http://jardesign.org/forum/img/m/3448/t/p1bd6dela2c1gpk1re0dui7ku3.png

This results in hypoxia, which is very annoying.


I use the latest version of the A320 and XP11.


Best regards
Asgar

96 Reply by neueschritte

  • neueschritte
  • New member
  • Offline
  • Registered: 2017-04-08
  • Posts: 1

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Dear Sirs,

today I bought the A320 via download link.

Until now I have mighty problems with the product.

I have NO IDEA what is going on, but I submitted a ticket, as I got a logn row of
Data ERRORS, and RED MESSAGES on screen, that I need to contact the support,
what I have done via ticket, including the log file.

I PAID 79.- EUROS for a product, that is giving me a killing headake, as I do not know
what is going wrong. The Activation was a horrortrip.. and now I have nothing what I
can do as waiting for someone to reply to my ticket......

-- FMC is giving me a killing klicking.... continues.... klicking and klicking sound, when pressing buttons,
    what I cannot stop in any way
-- Cannot continue the start up, as Server is always disconecting
-- RED ALLERT WARNINGS popup constantly that the SASL or what ever is accring an Error
--- Please contact Support RED ALLERT... again and again and again
--- WHY am I connected to a server??????

Is this a JOKE

I am so upset

Regards
Patrick

97 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

simonbarget wrote:

I'm having an issue with AP and SASL. How do I post my log file?


Ok - I just did it!

So the problem is that I get an on screen SASL error message at the beginning of the flight and the autopilot goes crazy. Hoping you can help.

Need just redownload 320 please.

Please read a FAQ before you post a bug http://support.jardesign.org

98 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

dimkzr wrote:

When I'm trying to disable "TERR ON ND" after landing the whole ND display goes black (and "terr on hd" switch stays illuminated):

http://jardesign.org/forum/img/m/4188/t/p1bcqk8eu2lnd1vjh1udj1prg1umo3.png

Will try to get the same on my computer to fix this in R2.

Please read a FAQ before you post a bug http://support.jardesign.org

99 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

marcelbrietzke wrote:

Dear JAR and Crew,

today i had some weird experience with the A320. I was testing 124th ATC plugin(not sure if this is conflicting)
Full documented on Video.
https://www.youtube.com/watch?v=fzHUgbFSs8o

First Error at 20:30 minute
Second Error at 23:35 minute watch to 25:00!!!
Last Error at 43:23

To mention i use custom soundpack!

Log file attached.

So, you are not stabilize aircraft and get toga lock at 20:30

Please read a FAQ before you post a bug http://support.jardesign.org

100 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Acei wrote:

Tried to do a flight from EIDW to LEMD this morning.  Got an SASL error after 30 mins.  Reset the SASL plugin and recovered the flight, but it happened again 10 mins later so had to abandon.

You need just redownload and reinstall aircraft

Please read a FAQ before you post a bug http://support.jardesign.org