You are not logged in. Please login or register.
JARDesign Group Board → Downloads, Updates. → XP10 v.1.3r3 250916 (Windows 7/8/10, MAC OS Maverick..Sierra)
Here are a some bugs in 1.3 r3.
Spoilers can be managed by mouse, but they can not be armed by mouse.
Flaps can not be managed by mouse.
Spoilers and flaps can be successfully managed (spoilers can be successfully armed) by keyboard.
I'm running Windows 10 and X-Plane 10.50.
Tested again with a clean installation. The aircraft still cannot follow the FMS. It remains stuck on the rwy waypoint after take-off.
bbox_log.txt 28.47 kb, 222 downloads since 2016-10-25
Log.txt 2.19 mb, 525 downloads since 2016-10-25
Tested again with a clean installation. The aircraft still cannot follow the FMS. It remains stuck on the rwy waypoint after take-off.
I faced with the same problem on A320.
The problem was X-FMC 2.7.
You should remove it (or rename win.xpl to win.xpl.dis), disabling by Plugin Admin doesn't help.
try to put the aircraft directly to the x-plane aircraft folder. It's said that this solves some strange problems. At the moment you have it in Aircraft/ADDON folder...
Ok, I suspected the problem was X-FMC. I had it disabled but I'll try with the plugin completely out of the plugins folder. I'll report again. Thanks for the suggestions.
Ok. The problem is X-FMC: once removed, everything goes nice and smooth. I think it should be investigated, because x-fmc is widely used for many other aircrafts.
Still no terrain "radar" on the MFD screen, and very low cabin voice.
Another problem. Not all the time, but 50% of the time the aircraft, after calling "positive climb" goes in A FLOOR and put engines at max and nose down with no control. The PFD show a RED bar in the speed taper, even if the aircraft accelerates over 250 kts.
In this condition the aircraft is uncontrollable and there is no way to prevent it crashes in the ground.
I have a suagestion can we make a PW or a GE engine doe the A330-243 that Will be great
I have been flying the A330 over the weekend on 10.51 without any issues, today as soon as I try to load the aircraft I get a CTD. The log file says something about failing to load the scratch pad. I have tried re downloading the latest version, it loads but after activiation I get the same crash. I have attached the log file.
Hope someone can help
Richatrd
bbox_log.txt 119 b, 218 downloads since 2016-10-31
Log.txt 62.53 kb, 368 downloads since 2016-10-31
Release!
v.1.3r3 distributive (Windows 7/8/10, MAC OS Maverick..Sierra)
New:
- 10.50 ready
- X-Life ready
- FMGS improved
- Cockpit textures and details improved
- OSX Sierra readyPlease install it as CLEAR!!! installation, not mix files with other version.
Download link http://jardesign.org/a330/download/install/JD330.zip
r2 is a repack of r1 with new (more fresh) SASL base plugin
r3 is a repack of r2 with new sound 3D plugin (OSX Sierra support)!!! If you use BSS custom sound pack with Sierra OSX, you need wait "Sierra-compatoble" update from BSS.
HOW TO INSTALL:
- be sure, that you use X-Plane 10.36+
- copy unziped "330_JARDesign" folder to ..\X-Plane 10\Aircraft\ folder
(be sure, what you are not use nonEnglish symbols in aircraft installation path)
- Download more fresh version of «GndHandling» plugin from official
board http://jardesign.org/forum/viewforum.php?id=29
- copy unzipped «GndHandling» folder to ../X-PLANE 10/Resources/plugins/ folder
- start X-Plane 64 bit and open a330, activation window is going to show up
- enter your serial key (Regcode), click NEXT and after a successful activation reopen aircraft via X-Plane menu
- activation works well with both MAC/WIN 64 bitUPDATE YOU NAV DATA WITH FRESH CYCLE (if needed)
a330 use NavData from
../X-PLANE 10/Custom Data/GNS430/navdata/ folder
if not find there – will try to read it from
..X:/X-PLANE 10/Resources/GNS430/navdata/
If you need update your cycle, please use Aerosoft/Navigraph
- “a320/330 Native format” or (the same in fact)
- “XPLANE_GNS430_777WORLDLINER_FF757PROF_NATIVE”
and put new cycle to ..X-PLANE 10/Custom Data/GNS430/navdata/ folderIf your activations are over - contact SUPPORT http://support.jardesign.org/
Thank you!!!!
Hello guys
How Can I obtain the fix version of the BBS sounds for the A330 compatible for OS Sierra. On BSS facebook page says that it is complatible with sierra already but I bought it fom the x-plana store. I downloaded it again and I still do not get engines sounds. Am I doing something wrong trying to install it again? Can someone help me please?
Thanks!
Will there be NEO engines for this aircraft like in the A320?
I have been flying the A330 over the weekend on 10.51 without any issues, today as soon as I try to load the aircraft I get a CTD. The log file says something about failing to load the scratch pad. I have tried re downloading the latest version, it loads but after activiation I get the same crash. I have attached the log file.
Hope someone can help
Anyone ?
Richatrd
I would like to know what keys are shortcuts for viewing the pedestal, overhead and front panels.
You can set the shortcuts on the numpad yourself. Set the view you want press ctrl plus the number on the numpad you want to assign the view to, to recall that just press the number again
J.A.Romanov wrote:Release!
v.1.3r3 distributive (Windows 7/8/10, MAC OS Maverick..Sierra)
New:
- 10.50 ready
- X-Life ready
- FMGS improved
- Cockpit textures and details improved
- OSX Sierra readyPlease install it as CLEAR!!! installation, not mix files with other version.
Download link http://jardesign.org/a330/download/install/JD330.zip
r2 is a repack of r1 with new (more fresh) SASL base plugin
r3 is a repack of r2 with new sound 3D plugin (OSX Sierra support)!!! If you use BSS custom sound pack with Sierra OSX, you need wait "Sierra-compatoble" update from BSS.
HOW TO INSTALL:
- be sure, that you use X-Plane 10.36+
- copy unziped "330_JARDesign" folder to ..\X-Plane 10\Aircraft\ folder
(be sure, what you are not use nonEnglish symbols in aircraft installation path)
- Download more fresh version of «GndHandling» plugin from official
board http://jardesign.org/forum/viewforum.php?id=29
- copy unzipped «GndHandling» folder to ../X-PLANE 10/Resources/plugins/ folder
- start X-Plane 64 bit and open a330, activation window is going to show up
- enter your serial key (Regcode), click NEXT and after a successful activation reopen aircraft via X-Plane menu
- activation works well with both MAC/WIN 64 bitUPDATE YOU NAV DATA WITH FRESH CYCLE (if needed)
a330 use NavData from
../X-PLANE 10/Custom Data/GNS430/navdata/ folder
if not find there – will try to read it from
..X:/X-PLANE 10/Resources/GNS430/navdata/
If you need update your cycle, please use Aerosoft/Navigraph
- “a320/330 Native format” or (the same in fact)
- “XPLANE_GNS430_777WORLDLINER_FF757PROF_NATIVE”
and put new cycle to ..X-PLANE 10/Custom Data/GNS430/navdata/ folderIf your activations are over - contact SUPPORT http://support.jardesign.org/
Thank you!!!!
Hello guys
How Can I obtain the fix version of the BBS sounds for the A330 compatible for OS Sierra. On BSS facebook page says that it is complatible with sierra already but I bought it fom the x-plana store. I downloaded it again and I still do not get engines sounds. Am I doing something wrong trying to install it again? Can someone help me please?
Thanks!
BSS packs include own plugin. If you not get it worked you need contact BSS support.
I have been flying the A330 over the weekend on 10.51 without any issues, today as soon as I try to load the aircraft I get a CTD. The log file says something about failing to load the scratch pad. I have tried re downloading the latest version, it loads but after activiation I get the same crash. I have attached the log file.
Hope someone can help
Richatrd
The same here, trying to load the aircraft and getting CTD
richardcarter wrote:I have been flying the A330 over the weekend on 10.51 without any issues, today as soon as I try to load the aircraft I get a CTD. The log file says something about failing to load the scratch pad. I have tried re downloading the latest version, it loads but after activiation I get the same crash. I have attached the log file.
Hope someone can help
Richatrd
The same here, trying to load the aircraft and getting CTD
It is somewhat disappointing that there has been no support with this issue. I have already spent a fair amount of money on addons from JAR and is certainly making me think about upgrading when I get X-Plane 11
Another problem. Not all the time, but 50% of the time the aircraft, after calling "positive climb" goes in A FLOOR and put engines at max and nose down with no control. The PFD show a RED bar in the speed taper, even if the aircraft accelerates over 250 kts.
In this condition the aircraft is uncontrollable and there is no way to prevent it crashes in the ground.
Hi mr Romanov.
I have the same problem that above but on ground when taxiing, there is alarm about altitude, the ATH goes on alone, red bar on pfd and the check list goes from before start checklist to after landing checklist.
i tried to take of but the plane become crazy.
Thanks for your help.
A330 v13.r3 x-plane 10.51
May be it is related with the radio altimeter. try not to engage the AP before the radio altimeter shows a GREEN number.
I have reported this problems years ago but never has been answered serioulsy. Sometimes it happens and sometimes not. It looks like the developer itself doesn't know why this happens.
Mad Mat wrote:Another problem. Not all the time, but 50% of the time the aircraft, after calling "positive climb" goes in A FLOOR and put engines at max and nose down with no control. The PFD show a RED bar in the speed taper, even if the aircraft accelerates over 250 kts.
In this condition the aircraft is uncontrollable and there is no way to prevent it crashes in the ground.Hi mr Romanov.
I have the same problem that above but on ground when taxiing, there is alarm about altitude, the ATH goes on alone, red bar on pfd and the check list goes from before start checklist to after landing checklist.
i tried to take of but the plane become crazy.
Thanks for your help.
A330 v13.r3 x-plane 10.51
May be it is related with the radio altimeter. try not to engage the AP before the radio altimeter shows a GREEN number.
It has nothing to do with the Autopilot, since it happens BEFORE the Autopilot will be engaged.
Guys I have a PROBLEM!!
I bought a330jar today, and the product cames without a330 plugin tab and no response in the speed, heading knobs,... (MCU)
I have Microsoft C++ 2010.
PLUGINS I use:
- Headshake
- FJCC_FMC
- ArdSim
Please help me!
Thanks!
My log: (in bold)
[SASL INFO] loading cab_text
[SASL INFO] loading mech_text
[SASL INFO] loading mcdu_res
[SASL INFO] loading sys_dnd_lght
[SASL INFO] loading sys_upd_lght
[SASL INFO] loading last
[SASL INFO] Avionics loaded
0:05:34.861 E/SCN: Failed to find resource 'panel.png', referenced from file 'Aircraft/Heavy Metal/330_JARDesign/'.
0:05:34.861 E/SCN: Failed to find resource 'panel.png', referenced from file 'Aircraft/Heavy Metal/330_JARDesign/'.
C:\Users\joaov\Desktop\X-Plane 10\Custom Data\UFMC\ufmc_sid.dat
0:05:34.861 I/FLT: Init dat_p0 type:loc_ram apt:LPPR start at:Gate S34
3Dsound Engine by JARDesign v.1.4
2Dsound Engine by JARDesign v.1.0
1Dsound Engine by JARDesign v.1.3
Clean exit from threads.
JARDesign 1D Sound Engine Disable
JARDesign 2D Sound Engine Disable
JARDesign 3D Sound Engine Disable
0:06:12.532 D/HID: HID Bridge Shutdown
----- X-Plane has shut down -----
Looks like you're missing some files . Just download the "installer" from the 1st post in this topic, unzip it and then copy and paste the A330 folder in to XP10 Aircraft folder of you choise.
But then i need another serial key... 
I know the keys only work for 4x times give it or take. I don't wanna wasted them..
Anyone has any suggestion? Please!
But then i need another serial key...
I know the keys only work for 4x times give it or take. I don't wanna wasted them..
Anyone has any suggestion? Please!
What is your problem?!
Download and make a security copy on you disk...
JARDesign Group Board → Downloads, Updates. → XP10 v.1.3r3 250916 (Windows 7/8/10, MAC OS Maverick..Sierra)
Powered by PunBB, supported by Informer Technologies, Inc.