26 Reply by thomas_99

  • thomas_99
  • Member
  • Offline
  • Registered: 2015-05-04
  • Posts: 235

Re: ver 2.6 beta 4 WIN/MAC 64 bit

Hi !

I've made 4 flights now with B4:

ivota wrote:

- ND terrain -------------> NOT work (black screen), look at video 00:17:08

I can NOT confirm this. ND Terrain was working, tried in EDNY in LOWI, was working
including water.

ivota wrote:

- after landing BRAKES  NOT working , look at video 00:50:44 (landing)

I can NOT confirm this. Tried with brake=MAX & "Break fan" on, breakes were working good, got "Breakes HOT" light,
light switches off after a while.

best regards.

27 Reply by ivota (edited by ivota 2016-01-08 19:30:07)

  • ivota
  • Member
  • Offline
  • Registered: 2015-04-13
  • Posts: 77

Re: ver 2.6 beta 4 WIN/MAC 64 bit

here is a new test flight (night).

http://www.twitch.tv/ivota_hr/v/34280331

+Compass Lt -----> confirm NOT working


thanks @thomas_99

+- ND terrain fixed (WORKING (JAR re-upload fix file))
+ BRAKES now work for me (possible my mistake)

28 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver 2.6 beta 4 WIN/MAC 64 bit

Please, anyone more have any troubles with brakes?

Please read a FAQ before you post a bug http://support.jardesign.org

29 Reply by simeg (edited by simeg 2016-01-08 23:51:24)

  • simeg
  • New member
  • Offline
  • Registered: 2016-01-07
  • Posts: 4

Re: ver 2.6 beta 4 WIN/MAC 64 bit

Hi Guys

so i Fly at this Time IVAO World Tour 2016 with this Airbus JARV2.6B4

after the Secound Flight i can not complet shutdown the left or right Engine is a 50/50 chance witsh Engine still Running

When i Cut Off the Engine the N1 and the Rest go lower, but after a point 6.2 N1 he will start again and again but she is flicering up and down to 7,9 and fall  back to 6.2 N1.

i dont know waht is the Problem.

Here is a Video, Pls look Complete: http://www.twitch.tv/vitomcjackson/v/34339207

i have no troble with the Breakes

30 Reply by hdespres (edited by hdespres 2016-01-08 22:30:18)

  • hdespres
  • hdespres
  • Member
  • Offline
  • Registered: 2015-12-02
  • Posts: 73

Re: ver 2.6 beta 4 WIN/MAC 64 bit

J.A.Romanov wrote:

Please, anyone more have any troubles with brakes?

Hello all...  the brake problem previously described is not new and I have had the same troubles in earlier version of the A320. I then re-installed the software with no issues....  X-plane problem vs JAR A320?

Wrong forum but I am still having troubles with the A330 engines spooling up after shutdown...

Hervé

i5 8600K OC@ 5.0Ghz, 16 GB DDR4-RAM
ASUS ROG STRIX GTX 1070 - X55 Saitek Pro Rhino Stick, X55 Saitek Rhino Throttle
Windows 10 64 Bit - X-plane 11.11 - X-Enviro 1.07 - X-Ivap - XCamera - GHD - EFASS NG

31 Reply by gpb500

  • gpb500
  • Member
  • Offline
  • Registered: 2015-09-13
  • Posts: 25

Re: ver 2.6 beta 4 WIN/MAC 64 bit

Test flight...the improvements are excellent in that the plane tracks the ND path much better (or did I just get lucky).  Will test more.  The angle on the ND as mentioned is not fixed...at least not with a stiff crosswind.  Also didn't have any of those sudden 3K+ ft/min descent surprises.  Also like how the plane doesn't drop to 270K when starting descent.  Good stuff...but I didn't try anything fancy.  Get a few more things fixed and I'll buy the sound pack.  Thanks.

PS - Fix the engine shut down issue on the A330 please.  smile

32 Reply by jarisaizprua (edited by jarisaizprua 2016-01-09 02:36:12)

  • jarisaizprua
  • New member
  • Offline
  • Registered: 2015-07-19
  • Posts: 3

Re: ver 2.6 beta 4 WIN/MAC 64 bit

I always have the same errors with ILS approaches, even with A330; the AIRAC is updated but the aircraft can't follow it. Please check SEQM ILS Z 36 procedure on the MCDU and ND. Thanks!!!

Post's attachments

Attachment icon pictures.zip 856.14 kb, 390 downloads since 2016-01-08 

33 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver 2.6 beta 4 WIN/MAC 64 bit

I will fix a330 fpln module (move 320's to 330) after a320 testing done.

Please read a FAQ before you post a bug http://support.jardesign.org

34 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver 2.6 beta 4 WIN/MAC 64 bit

hdespres wrote:
J.A.Romanov wrote:

Please, anyone more have any troubles with brakes?

Hello all...  the brake problem previously described is not new and I have had the same troubles in earlier version of the A320. I then re-installed the software with no issues....  X-plane problem vs JAR A320?

Wrong forum but I am still having troubles with the A330 engines spooling up after shutdown...

Hervé


Hmm.. may be.. Did you mean.. Hmm.. some users not use brake pedals, but park brake only. In this situation, then autobrake happen (landing/rollout), if user not push brake pedal (as at real aircraft), airbus will not unbrake.

Please read a FAQ before you post a bug http://support.jardesign.org

35 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver 2.6 beta 4 WIN/MAC 64 bit

simeg wrote:

Hi Guys

so i Fly at this Time IVAO World Tour 2016 with this Airbus JARV2.6B4

after the Secound Flight i can not complet shutdown the left or right Engine is a 50/50 chance witsh Engine still Running

When i Cut Off the Engine the N1 and the Rest go lower, but after a point 6.2 N1 he will start again and again but she is flicering up and down to 7,9 and fall  back to 6.2 N1.

i dont know waht is the Problem.

Here is a Video, Pls look Complete: http://www.twitch.tv/vitomcjackson/v/34339207

i have no troble with the Breakes

That problem was with x-plane 10.35 may be. What version of X-Plane you use?

Please read a FAQ before you post a bug http://support.jardesign.org

36 Reply by simeg (edited by simeg 2016-01-09 08:59:52)

  • simeg
  • New member
  • Offline
  • Registered: 2016-01-07
  • Posts: 4

Re: ver 2.6 beta 4 WIN/MAC 64 bit

Hi Romanov

thx for you fast replay

i have the newest Version of X-Plane V10.42, look the picture pls

http://53950318.swh.strato-hosting.eu/pic/engine.png

37 Reply by kampfnudel85 (edited by kampfnudel85 2016-01-09 11:55:29)

  • kampfnudel85
  • Member
  • Offline
  • From: Koblenz (Germany)
  • Registered: 2015-04-16
  • Posts: 39

Re: ver 2.6 beta 4 WIN/MAC 64 bit

J.A.Romanov wrote:
simeg wrote:

Hi Guys

so i Fly at this Time IVAO World Tour 2016 with this Airbus JARV2.6B4

after the Secound Flight i can not complet shutdown the left or right Engine is a 50/50 chance witsh Engine still Running

When i Cut Off the Engine the N1 and the Rest go lower, but after a point 6.2 N1 he will start again and again but she is flicering up and down to 7,9 and fall  back to 6.2 N1.

i dont know waht is the Problem.

Here is a Video, Pls look Complete: http://www.twitch.tv/vitomcjackson/v/34339207

i have no troble with the Breakes

That problem was with x-plane 10.35 may be. What version of X-Plane you use?


Hmmm i don't know if it will help you, but i have the same error when start the Engines and turn back the ignition switch to fast. The Engine works fine, but when i Shutdown the Engine i have the same error.

Regards / Grüße

Dirk

38 Reply by simeg (edited by simeg 2016-01-09 16:17:01)

  • simeg
  • New member
  • Offline
  • Registered: 2016-01-07
  • Posts: 4

Re: ver 2.6 beta 4 WIN/MAC 64 bit

Hi Members,

i have a idea for this Issus,

I see when i Start the APU than go the Left or Right Engine of this Issuse and start. When the APU is OFF no Issus of Engine

But i test this exactly and set a Video from this Issuse here in my Thred later


Now the Video over the APU and Engine Issus! Running 4 Minutes

http://www.twitch.tv/vitomcjackson/v/34464331

39 Reply by laohu314

  • laohu314
  • Member
  • Offline
  • Registered: 2016-01-03
  • Posts: 677

Re: ver 2.6 beta 4 WIN/MAC 64 bit

J.A.Romanov wrote:

Please, anyone more have any troubles with brakes?

I noticed a very slow decrease of speed when using max brakes after landing

iMac5K 27” (2015), i7 4GHz, OSX 10.14.6, 32GB, AMD M395X 4096MB, Saitek X52, TPM, Radio, Switch & Multi, TM MFD, XP11.35r1, FFA320v0.11.2-2305, ToLiSs A319 v1.3.3, JDA320 v3.4r1, JDA330 v3.2r1, XL v4_250719, FM v2.6r2,  GndHdg v.4.010719, Air Plugin v4.8.3,  FWL 2.7.19, 3jFPS-wizard, PI v2.73.06, NOAA v2.4.4, XSPs v2.75, XCL v1.37, BPB v0.47, SAM 1.1.0

40 Reply by braiego

  • braiego
  • New member
  • Offline
  • Registered: 2015-05-14
  • Posts: 3

Re: ver 2.6 beta 4 WIN/MAC 64 bit

Hi,

First flight EDDF LEVC. No problems. SIDs and STARs works fine.

best regards

Gunter

41 Reply by thomas_99 (edited by thomas_99 2016-01-09 17:09:25)

  • thomas_99
  • Member
  • Offline
  • Registered: 2015-05-04
  • Posts: 235

Re: ver 2.6 beta 4 WIN/MAC 64 bit

Hi JAR,

Found a new <CLICK>  <CLICK>  <CLICK> :-)

Load plane, Press "HOT START", wait a little bit, press "RAD NAV", press "left".

Result: never stopping click :-)

Yes, BSS sounds installed.

best regards,

42 Reply by john82088 (edited by john82088 2016-01-10 05:01:46)

  • john82088
  • Member
  • Offline
  • Registered: 2015-08-15
  • Posts: 26

Re: ver 2.6 beta 4 WIN/MAC 64 bit

I just purchased the sound pack found here (http://store.x-plane.org/JARDesign-A320 … p_428.html). When flying online (vatsim), I have tried to turn the sound down a little in the cockpit so I can hear the controller better and have not been able to do it through the MCDU or xplane itself. Since I just purchased it, I am not sure if this has anything to do with the beta or the sound plugin. I am using all the recommended settings.

By the way, I love the sound pack - absolutely amazing!

43 Reply by archuser01

  • archuser01
  • Member
  • Offline
  • Registered: 2015-12-07
  • Posts: 37

Re: ver 2.6 beta 4 WIN/MAC 64 bit

I agree With you John82088, I was thinking i am not leveling Correctly Airplane MCDU and Xplane Sound levels itself, After your post i saw it was not only me ) ! ' if it is not a bug ' . maybe someone can post an explanation to fix it correctly i assume ..
regards

44 Reply by ivota

  • ivota
  • Member
  • Offline
  • Registered: 2015-04-13
  • Posts: 77

Re: ver 2.6 beta 4 WIN/MAC 64 bit

@john82088 and @archuser01

https://vid.me/KivV

45 Reply by hdespres

  • hdespres
  • hdespres
  • Member
  • Offline
  • Registered: 2015-12-02
  • Posts: 73

Re: ver 2.6 beta 4 WIN/MAC 64 bit

ivota wrote:

@john82088 and @archuser01

https://vid.me/KivV

Thank You

i5 8600K OC@ 5.0Ghz, 16 GB DDR4-RAM
ASUS ROG STRIX GTX 1070 - X55 Saitek Pro Rhino Stick, X55 Saitek Rhino Throttle
Windows 10 64 Bit - X-plane 11.11 - X-Enviro 1.07 - X-Ivap - XCamera - GHD - EFASS NG

46 Reply by amischkowitz

  • amischkowitz
  • Member
  • Offline
  • Registered: 2015-08-06
  • Posts: 192

Re: ver 2.6 beta 4 WIN/MAC 64 bit

Hi,

Flight LFML to LEMD :

-I find ND line path angle no perfect right (see photo); perhaps because of the wind ?
http://jardesign.org/forum/img/m/1125/t/p1a8lteoet1js7lpn1p1e1eg5rts3.jpg

-It seems that TCAS does not function (I had several other planes around me from Wordl xplanes ) but nothing appear on the ND or alarm:
mode TA/RA , All and on

-always 20 to 30 NM difference for the Top of Climb between the ND and the perf page indication

Thanks a lot

47 Reply by john82088

  • john82088
  • Member
  • Offline
  • Registered: 2015-08-15
  • Posts: 26

Re: ver 2.6 beta 4 WIN/MAC 64 bit

Thank you - that was what I was looking for.

48 Reply by thomas_99

  • thomas_99
  • Member
  • Offline
  • Registered: 2015-05-04
  • Posts: 235

Re: ver 2.6 beta 4 WIN/MAC 64 bit

Hi !

Possible GoAround bug ?? Maybe someone can comment....

Short before ILS landing, I set new height (5000 ft), which was confirmed with "Go Around Height Set".

30 feet before touchdown I set TOGA-Power, which was confirmed with "Go Around".

The plane set ToGa Power and start to climb. AutoPilot 1+2  was on, plane goes to to HDS.

After HDS, I expect the plane to turn to HAM automatically, but the plane goes straight ahead.

http://jardesign.org/forum/img/m/552/t/p1a8ltj8kfib3n803r41lukhhs3.jpg

Should the plane turn to HAM ?? I think yes, but I'm not sure.

best regards,

49 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver 2.6 beta 4 WIN/MAC 64 bit

thomas_99 wrote:

Hi !

Possible GoAround bug ?? Maybe someone can comment....

Short before ILS landing, I set new height (5000 ft), which was confirmed with "Go Around Height Set".

30 feet before touchdown I set TOGA-Power, which was confirmed with "Go Around".

The plane set ToGa Power and start to climb. AutoPilot 1+2  was on, plane goes to to HDS.

After HDS, I expect the plane to turn to HAM automatically, but the plane goes straight ahead.

http://jardesign.org/forum/img/m/552/t/p1a8ltj8kfib3n803r41lukhhs3.jpg

Should the plane turn to HAM ?? I think yes, but I'm not sure.

best regards,

to understand what happen need check

log.txt
bbox_log.txt
tmpfpln.txt

Sorry, but one picture may be cant help.

Please read a FAQ before you post a bug http://support.jardesign.org

50 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver 2.6 beta 4 WIN/MAC 64 bit

amischkowitz wrote:

Hi,

Flight LFML to LEMD :

-I find ND line path angle no perfect right (see photo); perhaps because of the wind ?
http://jardesign.org/forum/img/m/1125/t/p1a8lteoet1js7lpn1p1e1eg5rts3.jpg

-It seems that TCAS does not function (I had several other planes around me from Wordl xplanes ) but nothing appear on the ND or alarm:
mode TA/RA , All and on

-always 20 to 30 NM difference for the Top of Climb between the ND and the perf page indication

Thanks a lot

So.. you want to say what green line should be always straight ahead? Are you sure? smile
https://youtu.be/9VfI4Pyam1E?t=35s
https://youtu.be/TEi-WX08ov8?t=2m48s

Please read a FAQ before you post a bug http://support.jardesign.org