JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41) (Page 1 of 7)

**J.A.Romanov** · 2021-01-18 14:00:08

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Topic: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

WHAT NEW:
With version 3.8 JD320 get updated PFD, ND and FMGS modules what was created for JD340

JD320 Actual version 3.8 link:
http://jardesign.org/a320/download/inst … 0_3810.zip

JD320 Prev version 3.7 link:
http://jardesign.org/a320/download/inst … 0_3710.zip

Actual CoPilot Download link:
http://jardesign.org/copilotdownload/JD-CPL-320.zip

HOW TO INSTALL:
- Please not mix files with other version.
- be sure, what you use X-Plane 11.41-11.50
- be sure what you set Control Sensivity of your to default values
- be sure what you turn Off X-Plane experimental flight model
- download and unzip pack. Open and read OpenAndReadMe folder
- copy unziped "320_JARDesign" folder to ..\X-Plane 11\Aircraft\ folder
(make sure you don't use nonEnglish symbols in aircraft's installation path)
- start X-Plane 64 bit and open a320, activation window will pop up
- enter your serial key (Regcode) and after a successful activation reopen the aircraft via X-Plane menu
- activation works well with both MAC/WIN 64 bit
- if you use BSS soundpacks, please note what "Modules/Custom Module/" now is the same as "Custom Avionics/" folder

If activation window not appear, there is 3 reasons may be for this -
- Check what you use computer under Admin mode.
- You use Windows 7 or 8 or 10. In this case, please install "Microsoft Visual C++ Redistributable 2010" pack http://www.microsoft.com/en-us/download … x?id=14632 , and also install more fresh JAVA.
- One of your installed X-Plane plugin (like SeaTraffic) can block activation windows. You can temporary remove your plugins one-by-one and check is activation window appear. Another (faster) way you can use - load Cessna 172, open X-Plane Menu->Plugins->Plugin Admin to disable ALL plugins, next - load JD320/330.

If you have security issue with MAC OS Catalina - please follow this instruction:
http://jardesign.org/forum/viewtopic.ph … 110#p31110

UPDATE YOU NAV DATA WITH FRESH CYCLE (if needed)
If you need to update your cycle, please use Aerosoft/Navigraph
- “JARDesign 330/330 Native format” and put a new cycle to ../X-PLANE 11/Custom Data/GNS430/navdata/ folder (create it if need)

If you use TCA Quadrant - please open X-Plane Settings -> Joystick and assign command jd - "TCA_MasterSwitch1ON" on your Master Switch 1 ON position. (Please not create special joystick profile for this aircraft). Next - Open MCDU MENU -> SETTINGS -> Page 2 and set ON your TCA option. Next - you can deassign "TCA_MasterSwitch1ON" command if need. Please be sure what you not assign some special profile for TCA Quadrant or just Reset It to Default at Joystick Settings.

Thank you!!!!

Please read a FAQ before you post a bug http://support.jardesign.org

**Makcimus** · 2021-01-19 10:24:40

Makcimus
Member
Offline

Registered: 2020-01-20
Posts: 16

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Совместимость с XP11.50 не актуальна.
Текущая актуальная версия XP11.51

System: Core i9 11900F ~ 5,2Ghz , 32Gb DDR4 3200MHz, NVidia RTX3070Ti 8Gb, W10Pro. 64 bits, SSD 512Gb, HDD 4Tb
Monitor: Samsung SyncMaster S27A650D (1920x1080)
joystick: TrustMaster T.Flight Xotas X
Sim.: X-plane 11.55r1

**Darko24** · 2021-01-19 16:39:08

Darko24
Member
Offline

Registered: 2017-04-11
Posts: 169

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

After a long time, I was hoping to be able to fly the JAR320 again, loading the latest version right away, but I was unable to perform a single flight in 24 hours. I tried all the variants, with x-life, with the co-pilot and without everything only the pure latest version failed me for a single year. There is always something wrong and the x-plane closes. Therefore, unfortunately, I will still be forced to use the ZIBO 737-800, with which there are no problems.
On the last flight I pressed UPDATE on METAR for the departure airport, the x-plane started processing and then it sent me into the air and crash the plane - frustrating.

My setup: Windows 10 (64-bit), Z490 AORUS PRO AX, INTEL i7 10700k, 32GB DDR4 RAM, NVIDIA Geforce GTX 2070S 8GB
X-Plane 11.55, X-Plane12RC2, Flight PRO joke, Logitech panels
My Fleet: JD320-V3.8R1 with copilot, JD330-V4.4B3 with copilot, ZIBO 737-800X,
Utilities: X-LIFE Deluxe verversion 4.30 latest, FMcar latest, GHD ver. latest, X Camera,BSS JAR A320 V4,Better pushback

**Makcimus** · 2021-01-19 19:40:55

Makcimus
Member
Offline

Registered: 2020-01-20
Posts: 16

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

По прежнему не работает регулировка света "FLOOD LT". Работает только анимация, но самого света нет!
------------------------------------------------------------------
The flood light control does not work. Only animation works, but no light itself!

System: Core i9 11900F ~ 5,2Ghz , 32Gb DDR4 3200MHz, NVidia RTX3070Ti 8Gb, W10Pro. 64 bits, SSD 512Gb, HDD 4Tb
Monitor: Samsung SyncMaster S27A650D (1920x1080)
joystick: TrustMaster T.Flight Xotas X
Sim.: X-plane 11.55r1

**peterg** · 2021-01-21 07:49:18

peterg
Member
Offline

Registered: 2019-10-30
Posts: 14

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Hi Jar, tried to install the 3.7. X-Plane stops during start by "Preparing World".
Log txt attached. Can you help?

**peterg** · 2021-01-21 07:50:45

peterg
Member
Offline

Registered: 2019-10-30
Posts: 14

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

sorry log txt here

Post's attachments

Log.txt 46.8 kb, 484 downloads since 2021-01-21

**ebitennis** · 2021-01-21 09:59:19

ebitennis
New member
Offline

Registered: 2018-11-16
Posts: 1

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

I installed version 3.7, but when I enter the serial number, I get an error message.
What should I do
regards

**dron420** · 2021-01-21 17:00:42

dron420
Developer
Offline

Registered: 2015-01-23
Posts: 129

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Makcimus wrote:

По прежнему не работает регулировка света "FLOOD LT". Работает только анимация, но самого света нет!
------------------------------------------------------------------
The flood light control does not work. Only animation works, but no light itself!

It is already fixed in version which is under development.

**Makcimus** · 2021-01-21 18:04:33

Makcimus
Member
Offline

Registered: 2020-01-20
Posts: 16

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

dron420 wrote:

It is already fixed in version which is under development.

Very cool!!!

System: Core i9 11900F ~ 5,2Ghz , 32Gb DDR4 3200MHz, NVidia RTX3070Ti 8Gb, W10Pro. 64 bits, SSD 512Gb, HDD 4Tb
Monitor: Samsung SyncMaster S27A650D (1920x1080)
joystick: TrustMaster T.Flight Xotas X
Sim.: X-plane 11.55r1

**Palpatine** · 2021-01-24 14:23:37

Palpatine
New member
Offline

Registered: 2020-10-31
Posts: 3

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

hello,

the thrustmaster tca quadrant addon didnt work for me 100%. i cant release the parking break, i need to press b on keyboard. and switch parking brake button at the same time.

regards

**AF-INTHESKY** · 2021-01-25 14:23:20

AF-INTHESKY
New member
Offline

Registered: 2021-01-25
Posts: 1

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Good morning. I can't find the serial key, where can I find it?

**max.russo** · 2021-01-28 07:16:56

max.russo
New member
Offline

Registered: 2021-01-28
Posts: 1

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

X-Plane stops during start by "Preparing World". The n version that doesn't work.
It's the same for the A330. Impossible to fly with a lot of bugs.

**Homer.Simpson** · 2021-01-28 20:09:24

Homer.Simpson
Privileged
Offline

From: EDDV, Germany
Registered: 2015-01-22
Posts: 522

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

If x-plane stucks at preparing world, Start xplane with a clean/Standard Custom scenery folder and load the 320. After activating the A320 you can take your custom scenery back and then the 320 should load Fine again. That worked for me.

**Darko24** · 2021-02-16 20:36:13

Darko24
Member
Offline

Registered: 2017-04-11
Posts: 169

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

After long time I try to fly A320 again wdth his vesrion, but never can land well. When I go to retard every time power go to maximum and my tgrottle lever go to dance. I go back to ZIBO.

My setup: Windows 10 (64-bit), Z490 AORUS PRO AX, INTEL i7 10700k, 32GB DDR4 RAM, NVIDIA Geforce GTX 2070S 8GB
X-Plane 11.55, X-Plane12RC2, Flight PRO joke, Logitech panels
My Fleet: JD320-V3.8R1 with copilot, JD330-V4.4B3 with copilot, ZIBO 737-800X,
Utilities: X-LIFE Deluxe verversion 4.30 latest, FMcar latest, GHD ver. latest, X Camera,BSS JAR A320 V4,Better pushback

**Fab10** · 2021-02-23 02:07:00

Fab10
Member
Offline

Registered: 2015-04-20
Posts: 48

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Manually tracking the Santorini VOR SNI outbound following the published VOR A RW33 approach (descending 3500’ to 3000’ in VS), the CDI went full scale deflection one side to full scale deflection the other side; the CDI would not stay centred, it kept moving full scale from side to side.
Tracking the inbound leg descending to MDA worked fine, as the CDI stayed centred normally as I tracked the CRS via the heading bug.
For information, I had set SNI on both VOR boxes with beacon outbound and inbound CRS set.

**jose964** · 2021-03-22 10:45:12

jose964
New member
Offline

Registered: 2021-03-22
Posts: 2

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

speed brake works badly from the joystick and from the keyboard, they can only be used by operating it with the mouse. Furthermore, when they are retracted, it seems that the sound they produce continues to be heard.

**Homer.Simpson** · 2021-03-22 16:46:42

Homer.Simpson
Privileged
Offline

From: EDDV, Germany
Registered: 2015-01-22
Posts: 522

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Did you try the Speed brake Setting for axis in the MCDU Menu?

**jose964** · 2021-03-23 14:37:18

jose964
New member
Offline

Registered: 2021-03-22
Posts: 2

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Homer.Simpson wrote:

Did you try the Speed brake Setting for axis in the MCDU Menu?

I hadn't tried it. When I selected "off", it worked normally again. Thank you very much for your help.

**Alexandre Paumgartten** · 2021-05-21 16:08:07

Alexandre Paumgartten
New member
Offline

Registered: 2020-08-13
Posts: 4

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Hi guys...
I have some issues with this new version.
After the aircraft has rolled over 60kt, the parking break triggers automatically.
Anyone else with this? Some help?
Thanks.

**denisbriche2402** · 2021-06-05 13:15:22

denisbriche2402
Member
Offline

Registered: 2015-04-26
Posts: 9

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Hi everyone,
I am on Mac 10.4 (Big sur)
Activation window doesn't appear though I am on admin mode and removed my plugins.
Thanks for help

**claudioplann** · 2021-06-17 02:12:49

claudioplann
New member
Offline

Registered: 2021-06-14
Posts: 1

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Goodnight.

I would like to know if anyone else has a serious problem with the fps of this aircraft.

I put the aircraft in the gate with about 30 fps and already in flight preparation, it drops to 14 to 16 fps. At Cruisin altitude it increases to 21, 22.23 fps and after landing it improves again to 30 fps .....

Anyone else have this problem?

My pc:

Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz 3.40 GHz
NVIDIA GTX1060 6GB
RAM 16,0 GB

**coolgovind180** · 2021-06-20 19:00:48

coolgovind180
Member
Offline

Registered: 2020-10-01
Posts: 6

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

after updating to latest version... the issues still persists. born auto tuning doesn't happen in my fmc. hence doesn't come in nd too. even before acceleration altitude the climb mode changes to open climb... there is some serious issue. I dont know when i can fly this smoothly. and the fly by wire still has lots of issues.

**mbecker0813** · 2021-08-10 20:28:37

mbecker0813
Member
Offline

Registered: 2015-10-24
Posts: 9

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Anybody else have issues with this aircraft (and the A330) leveling off and accelerating way too fast, almost unrealistically, after departure during the initial climb?

And then, when you are descending and level off, the throttle goes haywire and it overspeeds by 10-20 knots before settling back down to the indicated airspeed I selected.

This was never an issue but started happening a few updates ago and I don't see anybody else posting anything about this.

**idawg** · 2021-08-25 06:31:45

idawg
New member
Offline

Registered: 2021-08-25
Posts: 1

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

i cant activate the new update

**J.A.Romanov** · 2021-08-25 12:56:19

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

idawg wrote:

i cant activate the new update

Please www.support.jardesign.org with your serial key.

Please read a FAQ before you post a bug http://support.jardesign.org

JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41) (Page 1 of 7)

Posts: 1 to 25 of 152

1 Topic by J.A.Romanov 2021-01-18 14:00:08

Topic: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

2 Reply by Makcimus 2021-01-19 10:24:40

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

3 Reply by Darko24 2021-01-19 16:39:08

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

4 Reply by Makcimus 2021-01-19 19:40:55

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

5 Reply by peterg 2021-01-21 07:49:18

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

6 Reply by peterg 2021-01-21 07:50:45

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

7 Reply by ebitennis 2021-01-21 09:59:19

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

8 Reply by dron420 2021-01-21 17:00:42

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

9 Reply by Makcimus 2021-01-21 18:04:33

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

10 Reply by Palpatine 2021-01-24 14:23:37

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

11 Reply by AF-INTHESKY 2021-01-25 14:23:20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

12 Reply by max.russo 2021-01-28 07:16:56

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

13 Reply by Homer.Simpson 2021-01-28 20:09:24

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

14 Reply by Darko24 2021-02-16 20:36:13

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

15 Reply by Fab10 2021-02-23 02:07:00

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

16 Reply by jose964 2021-03-22 10:45:12

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

17 Reply by Homer.Simpson 2021-03-22 16:46:42

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

18 Reply by jose964 2021-03-23 14:37:18

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

19 Reply by Alexandre Paumgartten 2021-05-21 16:08:07

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

20 Reply by denisbriche2402 2021-06-05 13:15:22

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

21 Reply by claudioplann 2021-06-17 02:12:49 (edited by claudioplann 2021-06-17 02:15:30)

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

22 Reply by coolgovind180 2021-06-20 19:00:48

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

23 Reply by mbecker0813 2021-08-10 20:28:37

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

24 Reply by idawg 2021-08-25 06:31:45

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

25 Reply by J.A.Romanov 2021-08-25 12:56:19

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Posts: 1 to 25 of 152