26

Re: XP11.50 JD330 v.4.1

The white button doesn't seem to work

27

Re: XP11.50 JD330 v.4.1

http://jardesign.org/forum/img/m/9704/t/p1e5a8jd0i1pn91ncp13jc9hqmuu3.jpg

luyijie12 wrote:

The white button doesn't seem to work

28

Re: XP11.50 JD330 v.4.1

Hey,

nice Update, i had flown this Aircraft for more than a Year. Now i had read at Treshhold that it comes with VR inplemetation
and Ok it look amazing in VR but some knobs won´t Work, does this beta include the VR optimization or not?

kind regards and stay Safe

29

Re: XP11.50 JD330 v.4.1

J.A.Romanov wrote:
ddezulier wrote:

no sound whatever model (main or fpsboost) is used)
MCDU/FMGS when in popup refuses to draw its own pages inside its own screen but displays it on ND, or PFD, or ECAM ...

Please contact skype j.a.romanov directly

That's probably a side effect after installation.
Cleaning X-Plane preferences, deactivate plugins, reload = Ok
Close
Reactivate plugins
reload = OK
I'll fly her tomorrow LHBP-ESSA on IVAO anniversary  WT.
And I'll report !
:-)

ddezulier alias diaboloxpfr on X-Plane.org forum
VID 566478
VAT 1400805

30

Re: XP11.50 JD330 v.4.1

luyijie12 wrote:

http://jardesign.org/forum/img/m/9704/t/p1e5a8jd0i1pn91ncp13jc9hqmuu3.jpg

luyijie12 wrote:

The white button doesn't seem to work

Yes, does not work here too ...

ddezulier alias diaboloxpfr on X-Plane.org forum
VID 566478
VAT 1400805

31

Re: XP11.50 JD330 v.4.1

Guys livery is working ?

32

Re: XP11.50 JD330 v.4.1

I recently upgraded to version 11.50 and I noticed a performance problem with the beta version of A330. I have a Mac and I use Metal for rendering. The SASL plugin consumes a lot of resources and FPS is decreasing dramatically. Here are a couple of screenshots.

Post's attachments

Attachment icon 2020-04-07_22-12-55.png 1.2 mb, 96 downloads since 2020-04-07 

Attachment icon 2020-04-07_22-13-23.png 1.05 mb, 84 downloads since 2020-04-07 

33

Re: XP11.50 JD330 v.4.1

Great work getting this update ready for XP11.50, thank you.
Recently purchased the JAR A330 and still getting used to flying it. Fantastic exterior modelling.

I have some questions
1. I see no 'heat blur' effect from APU? Is this modelled?
2. Their is a basic checklist on clipboard under pilots window..will it be replaced like the pop out 'normal procedure' checklist on the JAR A320?

thanks

34

Re: XP11.50 JD330 v.4.1

dandix265 wrote:

Hello .
i downloaded last version. all good except for some button sound (battery button for example doesnt sound) and i can't find menu where i can open/close door and load passenger/fuel. For sound i don't have bss sound and im using sound3d
Thank for help
can see a screen of what im talking here
http://prntscr.com/rupmw9

Click on MCDU MENU on FMC. If your FMC is not on, click on the FMC screen for the pop-up

35

Re: XP11.50 JD330 v.4.1

Clicking on the weather update button works, but I also get this window...

http://jardesign.org/forum/img/m/4717/t/p1e5cfcc1l1orr13949dqt4i20l5.jpg

36 (edited by jcdp 2020-04-08 09:34:37)

Re: XP11.50 JD330 v.4.1

demontraitor wrote:

Clicking on the weather update button works, but I also get this window...

http://jardesign.org/forum/img/m/4717/t/p1e5cfcc1l1orr13949dqt4i20l5.jpg

Hi

Open XPuipc plugin and enter the IP address of your computer in the XPUIPC.ini file.

jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

37

Re: XP11.50 JD330 v.4.1

demontraitor wrote:
dandix265 wrote:

Hello .
i downloaded last version. all good except for some button sound (battery button for example doesnt sound) and i can't find menu where i can open/close door and load passenger/fuel. For sound i don't have bss sound and im using sound3d
Thank for help
can see a screen of what im talking here
http://prntscr.com/rupmw9

Click on MCDU MENU on FMC. If your FMC is not on, click on the FMC screen for the pop-up

Thank you so much. i prefer "plugin menu" but its ok.
Thanks again

38

Re: XP11.50 JD330 v.4.1

jcdp wrote:
demontraitor wrote:

Clicking on the weather update button works, but I also get this window...

http://jardesign.org/forum/img/m/4717/t/p1e5cfcc1l1orr13949dqt4i20l5.jpg

Hi

Open XPuipc plugin and enter the IP address of your computer in the XPUIPC.ini file.

jcdp

of course yes... sorry blonde moment lol

39

Re: XP11.50 JD330 v.4.1

A "test" successful flight from ELLX > EGCC. It all went perfectly.

Thanks smile

40 (edited by demontraitor 2020-04-08 10:54:32)

Re: XP11.50 JD330 v.4.1

I'm still on 11.41 (Windows 10)

Have noticed that when trying to exit X-Plane after a flight with the A330, X-Plane hangs just sitting there and doesn't shutdown... nothing untoward in the log file...

Weather Information at One Zero Four Zero Zulu. Wind, Two Seven Seven degrees at One knots. Visibility, Zero  kilometers. Sky Condition, Clear. Temperature, One Five . Dew point, Minus Five . QNH, One Zero Two Six
2:12:22.029 I/ATC: Airport flow changed at EGCM!
CurFlow: Runway 06 NewFlow: AUTOGEN: West
2:12:22.029 I/ATC: Changing EGCM CabState from 0 to 1
2:12:22.029 I/ATC: All departures are done at EGCM. Advancing...
2:12:22.029 I/ATC: Changing EGCM CabState from 1 to 2
2:12:22.029 I/ATC: All arrivals are done at EGCM. Advancing...
2:12:22.029 I/ATC: Changing EGCM CabState from 2 to 0
2:12:24.693 I/ATC: Airport flow changed at EGNF!
CurFlow: Runway 24 NewFlow: AUTOGEN: West
2:12:24.693 I/ATC: Changing EGNF CabState from 0 to 1
2:12:24.693 I/ATC: All departures are done at EGNF. Advancing...
2:12:24.693 I/ATC: Changing EGNF CabState from 1 to 2
2:12:24.693 I/ATC: All arrivals are done at EGNF. Advancing...
2:12:24.693 I/ATC: Changing EGNF CabState from 2 to 0
XL: 6917 : JARDesign plugin: G:\Games\Steam\steamapps\common\X-Plane 11\Resources\plugins\X-Life\Metar/ELLX.TXT file updated.
XL: 6917 : JARDesign plugin: G:\Games\Steam\steamapps\common\X-Plane 11\Resources\plugins\X-Life\Metar/EGCC.TXT file updated.
XL: 7089 : Shedule flight: A B738 EXS-946 LFLL
XL: 7089 : Shedule flight: A A320 EZY-1898 EDDB
2:19:32.900 I/SIM: Exiting the sim without confirmation
2:19:32.900 D/STM: Transitioning from state state_Normal to state_ShuttingDown
[AVS INFO]: Disabling...
[AIRPORTVS INFO]: Disabling...
FlyWithLua Info: Load exit file.
FlyWithLua Info: Exit file loaded.
FlyWithLua Info: FlyWithLua plugin disabled.
[MISSIONGENERATOR INFO]: Disabling...
[SKUNKCRAFTS UPDATER INFO]: Disabling...
[SKUNKCRAFTS UPDATER INFO]: [LUA]: "module"    SkunkCrafts Updater stopped
WebFMC: Plugin disabled

I have to force close X-Plane. I have no idea if this is related to the A330, but will investigate more... Anyone else getting this?

Regards

41

Re: XP11.50 JD330 v.4.1

Normal flight today between LHBP and ESSA.
Still too fast in descent, from FL100 transition to approach.

ddezulier alias diaboloxpfr on X-Plane.org forum
VID 566478
VAT 1400805

42

Re: XP11.50 JD330 v.4.1

Thanks so much for the prompt update. The only issue I have had is with the APU. Once started I can't initialise the APU Gen. The button stays showing a fault. However the systems behave as if the APU generator is working.

43

Re: XP11.50 JD330 v.4.1

Running A330 B5 under XP11.41 on extending the gear for landing, the undercarriage doors did not close.

44

Re: XP11.50 JD330 v.4.1

Fab10 wrote:

Running A330 B5 under XP11.41 on extending the gear for landing, the undercarriage doors did not close.

Or the u/c doors might display as open in replay.

45

Re: XP11.50 JD330 v.4.1

Still no weather with Active sky

46

Re: XP11.50 JD330 v.4.1

Did anyone else experience the FMCU screen being drawed on the bottom left corner? No matter what I do, can't get rid of it....

Post's attachments

Attachment icon PROBLEM.JPG 233.1 kb, 87 downloads since 2020-04-09 

47 (edited by Boo 2020-04-09 12:42:54)

Re: XP11.50 JD330 v.4.1

http://jardesign.org/forum/img/m/9999/t/p1e5ffbg5813di52lju514au1piv4.png
Plane doesn't follow path

48

Re: XP11.50 JD330 v.4.1

With regard to my previous post with the FMCU screen being drawn on the bottom left corner. I can report, switching off X-Enviro removes the screen on the bottom left corner. Re-Enabling, and it's back.

49 (edited by Luke173 2020-04-09 13:46:17)

Re: XP11.50 JD330 v.4.1

many thanks for the fast 11.5x version!

though I get very low framerate inside the cockpit, 10fps and lower, on the outside it's all fine. It's a behaviour I only see with other planes when they use librain.

It's the same for both types, 332 and 332 FPS boost.

(I have the bare installation of XP, with GroundHandling missing, but it makes no difference if it's there)

My set up is a MacMini 10.14.6 with an eGPU, log is attached. -> ah, how can I attach a log file? it seems to only let me add images.

Thanks! much aprechiated
Luke

Post's attachments

Attachment icon Log.txt 57.59 kb, 255 downloads since 2020-04-09 

50

Re: XP11.50 JD330 v.4.1

ddezulier wrote:
J.A.Romanov wrote:
ddezulier wrote:

no sound whatever model (main or fpsboost) is used)
MCDU/FMGS when in popup refuses to draw its own pages inside its own screen but displays it on ND, or PFD, or ECAM ...

Please contact skype j.a.romanov directly

That's probably a side effect after installation.
Cleaning X-Plane preferences, deactivate plugins, reload = Ok
Close
Reactivate plugins
reload = OK
I'll fly her tomorrow LHBP-ESSA on IVAO anniversary  WT.
And I'll report !
:-)

This solution for sound problem or for ND, or PFD, or ECAM
I also have no sound with BBS