1 Topic by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Topic: JD320 v.3.4 public beta

So.. a320 for X-Plane 11 version 3.4 public beta here.
This version get new/updated FMGS, like JD330

beta 1:
+ brand new FMGS installed

beta 2:
+ incorrect sys disp page fixed
+ acceleration on descend fixed

beta 3:
+ METAR info reading fixed
+ on-screen GPU button add

beta 4:
+ X-Plane 11.35 compatible
+ add MCDU MENU -> SETTINGS options
+ add SATCOM 3d model

beta 5:
+ FMGS module updated

Download link:
http://jardesign.org/a320/download/inst … 1_345b.zip

Updated CoPilot Download link:
http://jardesign.org/copilotdownload/JD … 240619.zip

!!! Please set X-Plane Experimental flight model to Off/Disable

HOW TO INSTALL:
  - Please not mix files with other version.
  - make sure, that you use X-Plane 11.26-11.31
  - copy unziped "320_JARDesign" folder to ..\X-Plane 11\Aircraft\ folder
    (make sure you don't use nonEnglish symbols in aircraft's installation path)
  - start X-Plane 64 bit and open a320, activation window will pop up
  - enter your serial key (Regcode), click NEXT and after a successful activation reopen the aircraft via X-Plane menu
  - activation works well with both MAC/WIN 64 bit

UPDATE YOU NAV DATA WITH FRESH CYCLE (if needed)
If you need to update your cycle, please use Aerosoft/Navigraph
- “JARDesign 330/330 Native format”
and put a new cycle to ../X-PLANE 11/Custom Data/GNS430/navdata/ folder
(create it if need)

Please note what this time we have beta of X-Plane 11 and beta of a320 ("beta" - product for testing and may not work well, hare errors and so on). If you need release, need stable version, please wait.

POSSIBLE / KNOWN BUGS:
- sound issue with BSS pack?

Please read a FAQ before you post a bug http://support.jardesign.org

2 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 v.3.4 public beta

Some useful notes for this version:

- Check Off "Experimental flight model" at X-Plane General Tab

http://jardesign.org/forum/img/m/22/t/p1d3t6n4tj1a2q907bo213k71a0u3.jpg

- Use GPU button to connect Ground Power

http://jardesign.org/forum/img/m/22/t/p1d3t6ock21i9i1elu1e1v17pe4dc5.jpg

- Setup hotkeys to call MCDU and MAP onscreen widget

http://jardesign.org/forum/img/m/22/t/p1d3t6prj812an17k512b21bohh717.jpg

- Use MCDU MENU to manage your handling / fuel / tow /settings / screenside toolbar

http://jardesign.org/forum/img/m/22/t/p1d3t6rdul18g5nci1tvv1q0118q6a.jpg

- After entering FROM/TO at Init A page you will get ability to generate flightplan or load presaved from FlightPlan folder

http://jardesign.org/forum/img/m/22/t/p1d3t6thcmnkbaon7pf1v5t1t7cd.jpg

http://jardesign.org/forum/img/m/22/t/p1d3t77mdf3rfs5v6b01t9o1fidg.jpg

- to save your flightplan you may use MCDU -> DATA -> Arr Right -> Pilot Routes

http://jardesign.org/forum/img/m/22/t/p1d3t78as3di810l1f6l18f21jeij.jpg

Please read a FAQ before you post a bug http://support.jardesign.org

3 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 v.3.4 public beta

reserved

Please read a FAQ before you post a bug http://support.jardesign.org

4 Reply by domined39aniello

  • domined39aniello
  • Member
  • Offline
  • Registered: 2015-07-22
  • Posts: 160

Re: JD320 v.3.4 public beta

J.A.Romanov wrote:

reserved


Sir my best regards

5 Reply by kicaj

  • kicaj
  • Member
  • Offline
  • Registered: 2019-02-17
  • Posts: 15

Re: JD320 v.3.4 public beta

I have a problem with paid sound all the time I hear such clicking there is some solution

6 Reply by ouistiti06

  • ouistiti06
  • Member
  • Offline
  • Registered: 2019-01-03
  • Posts: 14

Re: JD320 v.3.4 public beta

Hello
I just update the JD320 v.3.4 beta and impossible to make him follow the flight plan the plane runs around constantly.
A solution to the problem.

cordially

Luciano

7 Reply by kicaj (edited by kicaj 2019-02-17 13:24:08)

  • kicaj
  • Member
  • Offline
  • Registered: 2019-02-17
  • Posts: 15

Re: JD320 v.3.4 public beta

The flight plan works perfectly in the previous version it was different, only then is the problem with paid sounds

8 Reply by noah.heinzel

  • noah.heinzel
  • noah.heinzel
  • New member
  • Offline
  • Registered: 2019-01-15
  • Posts: 2

Re: JD320 v.3.4 public beta

I have got that BSS Sound Problem as well.

9 Reply by kicaj

  • kicaj
  • Member
  • Offline
  • Registered: 2019-02-17
  • Posts: 15

Re: JD320 v.3.4 public beta

I have the same problem with BBS sounds

10 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 v.3.4 public beta

yes, we already know about issue with BSS soundpack

Please read a FAQ before you post a bug http://support.jardesign.org

11 Reply by kicaj (edited by kicaj 2019-02-17 14:22:22)

  • kicaj
  • Member
  • Offline
  • Registered: 2019-02-17
  • Posts: 15

Re: JD320 v.3.4 public beta

Good job, now he's on tour, there is a chance that the cab lighting works like the A330 BRT

12 Reply by SandyLee

  • SandyLee
  • Member
  • Offline
  • Registered: 2017-04-07
  • Posts: 40

Re: JD320 v.3.4 public beta

As all versions before :

Why are the light knobs are not same direction, some are scroll up for right/up and others are down for right/up

Please make the controls consistent in usage

X-Life Deluxe
GHD
FMCAR
JD320

13 Reply by MartinEmbraer195

  • MartinEmbraer195
  • New member
  • Offline
  • Registered: 2019-02-05
  • Posts: 1

Re: JD320 v.3.4 public beta

Amazing aircraft and very pleased with my purchase, just one thing I would like you guys to fix it besides the HDG sound related to BSS... as you can see in my picture... when flying night flights the PFD and the ND look brighter than the two ECAM displays and I couldn't decrease the brightness in them to equal to the ECAMs so they all look the same... just to have more control over the displays' brightness... thank you so much for looking into it... best regards and keep up the incredible work you're doing in all of your addons...

Martin

14 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 v.3.4 public beta

We put to beta-test new FMGS work now. Sure, we continue work on cockpit/indication details.

Please read a FAQ before you post a bug http://support.jardesign.org

15 Reply by euroking2018 (edited by euroking2018 2019-02-18 06:51:23)

  • euroking2018
  • Member
  • Offline
  • Registered: 2018-10-21
  • Posts: 32

Re: JD320 v.3.4 public beta

X-Plane 11.32 r1 crashes when you push one button  in the cockpit.

Greetings Martin

16 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 v.3.4 public beta

euroking2018 wrote:

X-Plane 11.32 r1 crashes when you push one button  in the cockpit.

Greetings Martin

Thanks for report! If you have it stable, please reinstall aircraft (not mix with old files) and try. If no luck - please contact me skype j.a.romanov - we will check on your side

Please read a FAQ before you post a bug http://support.jardesign.org

17 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 v.3.4 public beta

kicaj wrote:

I have the same problem with BBS sounds

Look like this strings make HDG sound at /plugins/BSS/cockpit/sound.cfg:

# FCU push/pull rotation ################################
type=3d
play=once_when_drf_change
filename=rotatefcu.wav
play_drf=sim/custom/xap/fcu/alt100x
play_drf=sim/cockpit2/autopilot/heading_dial_deg_mag_pilot
x_position=0
y_position=2.14
z_position=-14.14
vol_int=1
vol_ext=0

until new version of BSS will come you may modify it to:

# FCU push/pull rotation ################################
#type=3d
#play=once_when_drf_change
#filename=rotatefcu.wav
#play_drf=sim/custom/xap/fcu/alt100x
#play_drf=sim/cockpit2/autopilot/heading_dial_deg_mag_pilot
#x_position=0
#y_position=2.14
#z_position=-14.14
#vol_int=1
#vol_ext=0

Please read a FAQ before you post a bug http://support.jardesign.org

18 Reply by jacquesyvesroy

  • jacquesyvesroy
  • New member
  • Offline
  • Registered: 2018-01-12
  • Posts: 4

Re: JD320 v.3.4 public beta

Thank you for the last version V3.4B3. It's run very good with the Copilot, a very nice plugin.
mermoz
windows 10 Pro

19 Reply by euroking2018

  • euroking2018
  • Member
  • Offline
  • Registered: 2018-10-21
  • Posts: 32

Re: JD320 v.3.4 public beta

J.A.Romanov wrote:
euroking2018 wrote:

X-Plane 11.32 r1 crashes when you push one button  in the cockpit.

Greetings Martin

Thanks for report! If you have it stable, please reinstall aircraft (not mix with old files) and try. If no luck - please contact me skype j.a.romanov - we will check on your side

It was up to x europe 2 scenery.
She was registered incorrectly.

Greetings Martin.

20 Reply by kicaj

  • kicaj
  • Member
  • Offline
  • Registered: 2019-02-17
  • Posts: 15

Re: JD320 v.3.4 public beta

thanks helped

21 Reply by kicaj

  • kicaj
  • Member
  • Offline
  • Registered: 2019-02-17
  • Posts: 15

Re: JD320 v.3.4 public beta

I have a question whether it is possible to do the tablet as it is in the A320ff?

22 Reply by ariel.walker

  • ariel.walker
  • Member
  • Offline
  • Registered: 2015-05-08
  • Posts: 12

Re: JD320 v.3.4 public beta

Hi Team!
I've checked SABE-SACO in two opportunities and I think TOD is not calculated correctly because on APPR Phase I have 4000 ft on FIX over charts indications.
I've to try GO AROUND procedure because speed and altitude is not correct. 
It was on DES mode, not OP DES mode.
Thanks in advance!

23 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 v.3.4 public beta

ariel.walker wrote:

Hi Team!
I've checked SABE-SACO in two opportunities and I think TOD is not calculated correctly because on APPR Phase I have 4000 ft on FIX over charts indications.
I've to try GO AROUND procedure because speed and altitude is not correct. 
It was on DES mode, not OP DES mode.
Thanks in advance!

Firstly, need check vertical profile in details using command to show AM and select Vert.Profile

Please read a FAQ before you post a bug http://support.jardesign.org

24 Reply by claytonfreitas360

  • claytonfreitas360
  • New member
  • Offline
  • Registered: 2018-03-15
  • Posts: 4

Re: JD320 v.3.4 public beta

Hello Srs. Problem with the BSS sound package. Does anyone know how to fix the problem?

25 Reply by laohu314

  • laohu314
  • Member
  • Offline
  • Registered: 2016-01-03
  • Posts: 677

Re: JD320 v.3.4 public beta

claytonfreitas360 wrote:

Hello Srs. Problem with the BSS sound package. Does anyone know how to fix the problem?

Wait for A320v3.4 to come out of beta and for BSS to update their product.

iMac5K 27” (2015), i7 4GHz, OSX 10.14.6, 32GB, AMD M395X 4096MB, Saitek X52, TPM, Radio, Switch & Multi, TM MFD, XP11.35r1, FFA320v0.11.2-2305, ToLiSs A319 v1.3.3, JDA320 v3.4r1, JDA330 v3.2r1, XL v4_250719, FM v2.6r2,  GndHdg v.4.010719, Air Plugin v4.8.3,  FWL 2.7.19, 3jFPS-wizard, PI v2.73.06, NOAA v2.4.4, XSPs v2.75, XCL v1.37, BPB v0.47, SAM 1.1.0