1 Topic by JAR

  • JAR
  • Admin
  • Offline
  • Registered: 2012-02-13
  • Posts: 394

Topic: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

Hello! This time X-Life plugin was reworked

Permanent link to actual version
http://www.jardesign.org/x-life/download/xlife_v2.zip

What New:
R1: (.xpl files attached here)
+ decrease of memory usage
+ increase a transit traffic dencity
+ add "Change CRZ FL request"
+ some bug and CTD was fixed

R2:
+ some CTDs fixed
+ framerate optimisation

R3:
+ add .xlf (new compatible airports) update notification
+ not-moved traffic for some airports fixed
+ takeoff without ATC clearance fixed


Installation:

If you use ver.2.X, you need update .xpl files only (attached below)

If you use ver.1.X, you need delete old and install new FULL plugin from ZIP, please not mix any

1. Be sure what you use OSX 10.9-10.12 or Windows 7-8-10 and X-Plane 64 bit 10.42+ or X-Plane 11 64 bit.

2. Be sure what you have at least one of static library installed -
OpenSceneryX. If not, you can install it for free opensceneryx.com

3. Copy “X-Life” folder to your ../X-PLANE 10/Resources/plugins/ folder

4. If you prefer use HD “Bluebell XL” traffic AI library, please download 3 files from
http://jardesign.org/downloads/BBXL/BBXL-1.zip
http://jardesign.org/downloads/BBXL/BBXL-2.zip
http://jardesign.org/downloads/BBXL/BBXL-3.zip

Next unZIP and put “Bluebell XL” folder to ../X-PLANE 10/Custom Data/ folder
and install folders “PackA”, “PackB”, “PackG”, “PackJ”, “PackP” to
../X-PLANE 10/Custom Data/Bluebell XL/ folder

UPDATE YOU NAV DATA WITH FRESH CYCLE (if needed)
X-Life use NavData (old) cycle by Aerosoft from own /navdata/ subfolder
or from ../X-PLANE/Custom Data/GNS430/navdata/ folder if exist

If you need update your cycle, please use Aerosoft/Navigraph
- “JARDesign a320/330 Native format” or (the same in fact)
and put new cycle to ../X-PLANE/Custom Data/GNS430/navdata/ folder

Airport Editor manual by Philip Walchester posted here
http://jardesign.org/forum/viewtopic.php?id=3261

FMCar update
Please use this files to update FMCar and make it compatible with new .xlf files format
http://jardesign.org/forum/viewtopic.ph … 877#p17877

All remain the same
- please post you opinion about this version, post what you like/unlike
- post your log.txt + x-life.dmp if Crash happen and you are on Windows.

Post's attachments

Attachment icon mac.xpl 1.27 mb, 1232 downloads since 2018-04-04 

Attachment icon win.xpl 1.95 mb, 3289 downloads since 2018-04-04 

JAR's Website

2 Reply by jcdp

  • jcdp
  • Member
  • Offline
  • Registered: 2016-03-08
  • Posts: 380

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

JAR wrote:

Hello! This time X-Life plugin was reworked to decrease of memory usage. This task is done. Another reason - we just increase a transit traffic dencity what you can see at air map. Also we just attach "Change CRZ FL request" cause this function may be useful in some situation. Some bug and CTD was fixed. All you need - is update your win.xpl and mac.xpl files (attached) inside your /plugins/x-life/ folder.

Be better if you can compare framerate what you get with 2.1 and 2.2 versions. For this, please:

- run x-life 2.1 in your favourite airport with cavok weather and light aircraft like cessna. Wait 5 minutes and look at framerate.
- update win.xpl and mac.xpl files, run x-life 2.2 in the same airport with same weather and aircraft. Wait 5 minutes and look at framerate.

Please inform me about results if this possible.

Hi Eugeny

I just made what you suggested

Cavok ver 2.1  30-32 fps
          ver 2.2  35-37 fps

Thanks for improvement .

jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

3 Reply by Capto

  • Capto
  • Member
  • Offline
  • Registered: 2015-04-15
  • Posts: 23

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

Cavok ver 2.1  47/48 fps
          ver 2.2  48/49 fps

thank you

4 Reply by ilankrt (edited by ilankrt 2018-03-07 20:44:27)

  • ilankrt
  • Member
  • Offline
  • Registered: 2015-10-20
  • Posts: 774

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

Test flight EDDM - EDDK X-Plane 11.20r6 A330 v.3.r3, X-Life 2.2r1 - perfect flight simulation from cold and dark until parking and engine shuttdown

The A330 is now very good balanced in all flight situation including APPR and landing. The renew MCDU is impressing and takes the wind out of the sails of all the critics who have always had to put up with something.

X-Life is also working without any problems enhancing the AI traffic. I think that most of the problems that have occurred so far have in the majority their causes in the unfinished or improperly planned sceneries.

FPS A330 EDDM (high XP graphic settings and 2048 x 1152 resolution):
v.2.1 inside cockpit  36fps outside 44fps
v.2.2          "           35fps     "      41fps

Thanks to JAR and his team

X-Plane 11.30r3 | iMac27 OSX Mojave 14.10.4, | Samsung ultra-wide screen 49-inch | Saitek equipment | MFG pedals |Gladiator Joystick | Plugins: GndHandling, RWC, SMP, SoundM, X-Life, BetterPushback, AutoGate, SoundMaxx, X-ATC-chatter, X-Camera | iPad 12.9, iPad Air 9.7  | Airliner: JAR A320/A330, FF A350XWB, FF B767, SSG B747-8 inter, Epic1000 new, TBM900  http://ilankrt1.blogspot.co.il

5 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

Ok, looks like my own results. Equal or little less framerate bur memory usage decrease a lot and have many aircafts it the sky as transit.

Please read a FAQ before you post a bug http://support.jardesign.org

6 Reply by colinah

  • colinah
  • Member
  • Offline
  • Registered: 2015-04-22
  • Posts: 138

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

At stand 558 at the Aerosoft London Heathrow, a frame hungry airport, with medium weather in A330v3r2 I got 20/21 with the old X-Life and at the same spot 24/25 witt the naw X-Life. So, an increase of about 3 or 4fps.

I also noticed that 2.2r1 loaded aircraft in the air and on the ground quicker, I will try a flight in the A330 later.

A job well done JAR and team.

7 Reply by brunokoechel

  • brunokoechel
  • Member
  • Offline
  • Registered: 2015-06-13
  • Posts: 14

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

Iam so happy that you still you are still working at Xlife. I will compare as soon a possible.
I hope you can improve the fps too compared to 2.1 smile

8 Reply by enrigolan79

  • enrigolan79
  • enrigolan79
  • Member
  • Offline
  • From: La Rochelle
  • Registered: 2017-01-11
  • Posts: 86

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

Hi Eugeny

Cavok ver 2.1  50 fps
          ver 2.2  51 fps

Thanks for FL change in cruise ... very useful

Henri

Win7x64/Sp1 - i7-6700k@4.2GHz - 32Go ddr3 - LCD : 19"(1280x1024)+32"(1920x1080)+19"(1280x1024)
Geforce GTX 1060 6Go - Saitek Proflight yoke and rudders - XP11.20r3
A320neoJDv3.2r1 & BSS PW1000 v4.0 sound pack - A330JDv3.0r4 & BBS PW1000v2.02 sound pack
GHdeluxe FMcar2.6r1  X-Lifedeluxe2.2r2  X-ATCchatter v1.5.3   LittleNavMap   xEnviro1.07

9 Reply by Darko24

  • Darko24
  • Member
  • Offline
  • Registered: 2017-04-11
  • Posts: 169

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

Nice works JAR. Frame rate +1 FPS on new version. Nice option for change FL, and have many aircraft in the sky as transit. It is nice to see all this AI planes on map or SimBrief map it make the feeling that you're not alone in the sky.

Well done team

My setup: Windows 10 (64-bit), Z490 AORUS PRO AX, INTEL i7 10700k, 32GB DDR4 RAM, NVIDIA Geforce GTX 2070S 8GB
X-Plane 11.55, X-Plane12RC2, Flight PRO joke, Logitech panels
My Fleet:  JD320-V3.8R1  with copilot, JD330-V4.4B3 with copilot, ZIBO 737-800X,
Utilities: X-LIFE Deluxe verversion 4.30 latest, FMcar latest, GHD ver. latest, X Camera,BSS JAR A320 V4,Better pushback

10 Reply by ilankrt

  • ilankrt
  • Member
  • Offline
  • Registered: 2015-10-20
  • Posts: 774

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

Concerning the new X-Life version:
- For the first time I wasn't  flying alone. During flight there were severals AI aircraft at different flight level.....
- More AI traffic on taxiways and in the sky around airports are making airport sceneries becoming more alive...
- ATC allowed me to change FL during cruising to avoid heavy cloud formations..

All in all XL is getting more and more sophisticated !

X-Plane 11.30r3 | iMac27 OSX Mojave 14.10.4, | Samsung ultra-wide screen 49-inch | Saitek equipment | MFG pedals |Gladiator Joystick | Plugins: GndHandling, RWC, SMP, SoundM, X-Life, BetterPushback, AutoGate, SoundMaxx, X-ATC-chatter, X-Camera | iPad 12.9, iPad Air 9.7  | Airliner: JAR A320/A330, FF A350XWB, FF B767, SSG B747-8 inter, Epic1000 new, TBM900  http://ilankrt1.blogspot.co.il

11 Reply by pm@xcbs.de

  • pm@xcbs.de
  • New member
  • Offline
  • Registered: 2017-12-18
  • Posts: 4

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

I had a CTD on Approach when i request another runway (26L instead of 30).

Just clicked "Request Runway 26L" for KMIA and then it crashed.

12 Reply by JAR

  • JAR
  • Admin
  • Offline
  • Registered: 2012-02-13
  • Posts: 394

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

pm@xcbs.de wrote:

I had a CTD on Approach when i request another runway (26L instead of 30).

Just clicked "Request Runway 26L" for KMIA and then it crashed.

Can you attach xlife.dmp from X-Plane folder?

JAR's Website

13 Reply by ivota (edited by ivota 2018-03-09 15:05:12)

  • ivota
  • Member
  • Offline
  • Registered: 2015-04-13
  • Posts: 77

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

I just tested a new version of x-life  2.2 R1. It was enjoyable flight. Thanks JAR.
I made a flight on twitch.

https://www.twitch.tv/videos/236835985

Here is my opinion what is possible wrong accordion this flight:

1. X-life made weird route , I checked route then I made route with http://vau.aero/route/

2. In my opinion when passed TA 12000 , that is trigger for contact CENTER

3. X-life used wired ATC Frequencies, not REAL freq.

14 Reply by pm@xcbs.de (edited by pm@xcbs.de 2018-03-09 15:09:00)

  • pm@xcbs.de
  • New member
  • Offline
  • Registered: 2017-12-18
  • Posts: 4

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

JAR wrote:
pm@xcbs.de wrote:

I had a CTD on Approach when i request another runway (26L instead of 30).

Just clicked "Request Runway 26L" for KMIA and then it crashed.

Can you attach xlife.dmp from X-Plane folder?

Post's attachments

Attachment icon x-life.dmp 253.24 kb, 617 downloads since 2018-03-09 

15 Reply by MrGeeBee

  • MrGeeBee
  • Member
  • Offline
  • Registered: 2017-04-14
  • Posts: 60

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

When calling TOD, you get "Wrong ATIS information." It should be set at transition altitude and not XXXXXFT at TOD. Otherwise I like it better now, much more FPS friendly, and also ALT Change request is great.

16 Reply by JAR

  • JAR
  • Admin
  • Offline
  • Registered: 2012-02-13
  • Posts: 394

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

MrGeeBee wrote:

When calling TOD, you get "Wrong ATIS information." It should be set at transition altitude and not XXXXXFT at TOD. Otherwise I like it better now, much more FPS friendly, and also ALT Change request is great.

Before contact you need just look to ATIS and actual ATIS ident will be include to pilot's message

JAR's Website

17 Reply by pm@xcbs.de

  • pm@xcbs.de
  • New member
  • Offline
  • Registered: 2017-12-18
  • Posts: 4

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

Hi Jar,

last flight I tried to get vectors near the arrival airport.
Until there I followed my flightplan as filed. Then i realised that my STAR wasnt the right and to have it easy I "requested vectors".
The vector I got was to the first waypoint of the flightplan.

Is this right ? I thought I should get vectors to the approach.

Except of this, nice version, heavy traffic even at high flightlevels, much fun, keep up the good work.

Patrick

18 Reply by MrGeeBee

  • MrGeeBee
  • Member
  • Offline
  • Registered: 2017-04-14
  • Posts: 60

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

JAR wrote:
MrGeeBee wrote:

When calling TOD, you get "Wrong ATIS information." It should be set at transition altitude and not XXXXXFT at TOD. Otherwise I like it better now, much more FPS friendly, and also ALT Change request is great.

Before contact you need just look to ATIS and actual ATIS ident will be include to pilot's message

Ok, thank you.

19 Reply by demontraitor

  • demontraitor
  • Member
  • Offline
  • Registered: 2017-05-27
  • Posts: 52

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

I just a CTD too...

Demon

Post's attachments

Attachment icon Log.txt 159.82 kb, 800 downloads since 2018-03-09 

Attachment icon x-life.dmp 364.96 kb, 521 downloads since 2018-03-09 

20 Reply by demontraitor

  • demontraitor
  • Member
  • Offline
  • Registered: 2017-05-27
  • Posts: 52

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

is it worth updating the traffic AI library, or has that not changed?

Thanks. Demon

21 Reply by MrGeeBee

  • MrGeeBee
  • Member
  • Offline
  • Registered: 2017-04-14
  • Posts: 60

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

demontraitor wrote:

is it worth updating the traffic AI library, or has that not changed?

Thanks. Demon

Think last update was in 2016, at least if you search the Org Forums.

22 Reply by randyran (edited by randyran 2018-03-09 21:59:58)

  • randyran
  • Member
  • Offline
  • From: LIBG
  • Registered: 2016-02-17
  • Posts: 16

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

demontraitor wrote:

is it worth updating the traffic AI library, or has that not changed?

Thanks. Demon

I successfully upgraded models and textures by using the new Bluebell OBJ8 files for CSL, just replacing only files without touching subdirectories structure to let be recognized by the X-Life plugin and it works so good.

Edit:
@Eugene, would you mind to change the Bluebell directory structure from the old package to the new one to put in the ..\Resources\plugins\XSquawkBox\Resources\CSL directory, with the same substructure of CSL for XSquawkBox?
This solution should make a pratical way to renew old models, update and why not, have more kind of planes.

23 Reply by demontraitor

  • demontraitor
  • Member
  • Offline
  • Registered: 2017-05-27
  • Posts: 52

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

randyran wrote:
demontraitor wrote:

is it worth updating the traffic AI library, or has that not changed?

Thanks. Demon

I successfully upgraded models and textures by using the new Bluebell OBJ8 files for CSL, just replacing only files without touching subdirectories structure to let be recognized by the X-Life plugin and it works so good.

Shall try this, thanks...

24 Reply by nunomigpe

  • nunomigpe
  • Member
  • Offline
  • Registered: 2018-01-10
  • Posts: 5

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

hI THERE

Just install the 2 files, i was able to send to ATIS, but when exporting to FMG says wrong file i use A320

25 Reply by brunokoechel (edited by brunokoechel 2018-03-10 11:41:54)

  • brunokoechel
  • Member
  • Offline
  • Registered: 2015-06-13
  • Posts: 14

Re: X-Life ver 2.2 R1, R2, R3 for X-Plane 10/11

randyran wrote:
demontraitor wrote:

is it worth updating the traffic AI library, or has that not changed?

Thanks. Demon

I successfully upgraded models and textures by using the new Bluebell OBJ8 files for CSL, just replacing only files without touching subdirectories structure to let be recognized by the X-Life plugin and it works so good..

For me all aircraft are in the ground now. The positions seems not to be correct.

To Xlife 2.2: I have exact 1 fps more big_smile