26 Reply by SinusJayCee

  • SinusJayCee
  • Member
  • Offline
  • Registered: 2017-04-17
  • Posts: 37

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

I'm currently trying the new version on a flight from KIAD to LFPG. All in all, it works quite good.

However, the FD seems to have difficulties with crosswind. The plane slightly misses the current waypoint, short before, it starts turning towards it, and after that, it turns in the other direction again to follow the track to the next waypoint.

Here are two screenshots. One shows the ND at the moment the plane turns in the other direction again after passing the waypoint LIMRI. Before, it turned to the left. The second one shows of the flight path.

http://jardesign.org/forum/img/m/4445/t/p1c5eilmkvtik1mgp1rrgqmo12at9.jpg

http://jardesign.org/forum/img/m/4445/t/p1c5eilml0bjp1kn11g2l63i1dk7a.png

27 Reply by SinusJayCee

  • SinusJayCee
  • Member
  • Offline
  • Registered: 2017-04-17
  • Posts: 37

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

And anther issue, that I have with the 2.2 R3 as well: The dividing wall inside the cabin are completely black during night flights. At daylight, the are illuminated correctly.

http://jardesign.org/forum/img/m/4445/t/p1c5eitum6pfd1e69106gs5h161o4.png

28 Reply by colinah

  • colinah
  • Member
  • Offline
  • Registered: 2015-04-22
  • Posts: 138

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

Hello ilankrt, if you mean profile data is my computer setup, it's pretty much  the same as yours.

In answer to jo12341, I did try that but nothing happened. Thanks for the tip, I will give it another go.

I didn't mention the crash I had was when trying to load a downloaded flightplan into X-Life. When I let X-Life make the plan it loaded OK.
It may well have been me not being used to the new MCDU setup. Having said that the new MCDU is great, can it be put into the A320.

29 Reply by MrGeeBee

  • MrGeeBee
  • Member
  • Offline
  • Registered: 2017-04-14
  • Posts: 60

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

First of all, a big thanks for this update. Well done JarDesign.

Then some issues:

Trying to add this route

SBGR/09L UKBE1C UKBEV UZ26 KEXIT UZ46 CORVO UZ8 EGONI UL304 JOSES A315 ZIN
DCT ZQA DCT OMN J45 CRG  KATL/08L

Works fine until UL304 to JOSES, then it all crashes.

Post's attachments

Attachment icon fmgs.dmp 430.25 kb, 493 downloads since 2018-02-03 

Attachment icon Log.txt 66.65 kb, 428 downloads since 2018-02-03 

30 Reply by SinusJayCee (edited by SinusJayCee 2018-02-03 22:05:55)

  • SinusJayCee
  • Member
  • Offline
  • Registered: 2017-04-17
  • Posts: 37

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

Finally got a CTD short before intercepting the ILS. Find the log and memory dump attached.

Post's attachments

Attachment icon fmgs.dmp 295.6 kb, 483 downloads since 2018-02-03 

Attachment icon Log.txt 176.63 kb, 484 downloads since 2018-02-03 

31 Reply by Porthos

  • Porthos
  • Member
  • Offline
  • Registered: 2015-08-09
  • Posts: 8

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

Acei wrote:
dudleybrooke wrote:

I was hoping controls would be unified with the A320, so that the mousewheel could be used for rotary switches.

+1

+1

32 Reply by Porthos

  • Porthos
  • Member
  • Offline
  • Registered: 2015-08-09
  • Posts: 8

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

zpampal wrote:

Downloaded, installed. Used my existing key. And this is what I get.

Yes I had the same thing. I reloaded the aircraft through the Developer menu and that ws my result as well. I quit XPlane 11 then restarted. Loaded the aircraft through the menu and worked fine. I hope you have found this out by now  smile

33 Reply by jcdp

  • jcdp
  • Member
  • Offline
  • Registered: 2016-03-08
  • Posts: 380

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

vishido wrote:

Hi Roman, I can't takeoff with the airplane. My xplane crashed on LIRF taxiway and now during MCDU configuration putting FL and T in INIT PAGE with the airplane at stand 306 EGLL.
Running Xplane 11.10 on Windows10.

Only enter FL : 380 for instance , this will give    FL380/-56  (example) without crash .

jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

34 Reply by simmerdiman

  • simmerdiman
  • Member
  • Offline
  • Registered: 2018-02-03
  • Posts: 10

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

1. Когда самолет занимает эшелон, происходит снижение оборотов двигателя, а затем сразу же разгон, независимо от маршрута, сначала тяга снижается, затем разгоняется.
2. Мышинная зона для солнцезащитной пленки у командира очень мала, трудно ее потом убрать.
3. Переодически самолет пролетает маршрутные точки и начинает кружиться.
4. На ручке спойлеров, если приблизить, виден какой-то графический баг.
5. Временами не работает кропка "+" на количестве топлива в загрузчике.

1. When the aircraft occupies a train, there is a decrease in engine speed, and then immediately acceleration, regardless of the route, first the thrust decreases, then accelerates.
2. The mouse zone for the sun-protective film of the commander is very small, it is difficult to remove it later.
3. Periodically, the aircraft flies through the waypoints and starts spinning.
4. On the handle of spoilers, if you zoom in, you see some graphic bug.
5. At times the "+" crop does not work on the amount of fuel in the loader.

35 Reply by Jgtitus

  • Jgtitus
  • New member
  • Offline
  • Registered: 2017-09-09
  • Posts: 1

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

Just flew a quick hop from KOKC to KIAH. I found a few little quarks but overall the plane performed very smoothly. I ran through all phases of flight and even finished using an auto-approach landing perfectly. The MCDU and autopilot system tracked well. Issues I found were overhead panel buttons don't make a 'click' on/off sound for me when pushed. They just light up. I had one crash yesterday using Perfect Pushback at the gate. Ill try again later and include a .dmp and log if it happens again but overall I am very impressed!!

36 Reply by jcdp (edited by jcdp 2018-02-03 23:39:53)

  • jcdp
  • Member
  • Offline
  • Registered: 2016-03-08
  • Posts: 380

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

Hi

When entering a coroute and with init page correctly filled I cannot see any altitude on flight plan waypoints .
So, only open climb is available, what do I do wrong ?
of course no TC nor TOD appear.

On an other hand I cannot get fuel prédictions ...and fill the Aircraft accurately

jcdp

Post's attachments

Attachment icon fmgs.zip 30.54 kb, 307 downloads since 2018-02-03 

Attachment icon Log.zip 24.98 kb, 318 downloads since 2018-02-03 

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

37 Reply by Milo1404

  • Milo1404
  • New member
  • Offline
  • Registered: 2017-06-24
  • Posts: 4

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

I was doing the MCDU entries and when i click to enter the flightlevel and the temp x plane crashes

38 Reply by MrGeeBee

  • MrGeeBee
  • Member
  • Offline
  • Registered: 2017-04-14
  • Posts: 60

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

Been able to fly some finally, there are serious issue with programming the MCDU routes. It constantly crashes on, what it looks like, longer routes. But overall it's a great update still! Thanks again JarDesign.

Some wishes:

Mouse wheel knobs please.

39 Reply by jcdp

  • jcdp
  • Member
  • Offline
  • Registered: 2016-03-08
  • Posts: 380

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

Milo1404 wrote:

I was doing the MCDU entries and when i click to enter the flightlevel and the temp x plane crashes


Only enter FL ... such as 380 for instance . And you shall have both (FL/Temp)

jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

40 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

flightsimarts wrote:

After starting the APU or connecting the GPU my ND and my mcdu  wont light up. I checked the brightness and everything i could think of but cant get it working. Also i cannot  set a command  for jd/fmgs/CommandShowMcdu as recommended as i dont have this Option in my Settings. In the Log file I found out that there is an error Code 1114 while loading the fmgs/win.xpl file

skype j.a.romanov me please about Code 1114

Please read a FAQ before you post a bug http://support.jardesign.org

41 Reply by vishido (edited by vishido 2018-02-04 10:10:43)

  • vishido
  • New member
  • Offline
  • Registered: 2018-02-03
  • Posts: 2

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

jcdp wrote:
vishido wrote:

Hi Roman, I can't takeoff with the airplane. My xplane crashed on LIRF taxiway and now during MCDU configuration putting FL and T in INIT PAGE with the airplane at stand 306 EGLL.
Running Xplane 11.10 on Windows10.

Only enter FL : 380 for instance , this will give    FL380/-56  (example) without crash .

jcdp


The bug is this: the orange squares are 5/3 and you can think that you need insert 38000/-58... if you do that it crash but if you insert only:
- 38000
- 380
- 380/-58
everything is ok!

At least you can insert whatever you want except 5+3 digits!

Thanks for your suggestion!

42 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

colinah wrote:

not sure how to open the menu on the MCDU without the aircraft powered up

need to assign command to open MCDU widget on the screen and operate with Handling
(read first post about command)

Please read a FAQ before you post a bug http://support.jardesign.org

43 Reply by jcdp

  • jcdp
  • Member
  • Offline
  • Registered: 2016-03-08
  • Posts: 380

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

jcdp wrote:

Hi

When entering a coroute and with init page correctly filled I cannot see any altitude on flight plan waypoints .
So, only open climb is available, what do I do wrong ?
of course no TC nor TOD appear.

On an other hand I cannot get fuel prédictions ...and fill the Aircraft accurately

jcdp

Well,
As it is slightly different from V2 ...I was in trouble ...

Anyway I found how to manage ...

So, false problem ...sorry

jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

44 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

simmerdiman wrote:

3. Переодически самолет пролетает маршрутные точки и начинает кружиться.
4. На ручке спойлеров, если приблизить, виден какой-то графический баг.
5. Временами не работает кропка "+" на количестве топлива в загрузчике.

по 3 - надо бы примерчик
по 4 - хорошо бы скриншотик
по 5 - если при этом работают движки или ВСУ (но есть трик - поставить на паузу сим - плюс будет работать)

Please read a FAQ before you post a bug http://support.jardesign.org

45 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

jcdp wrote:

Hi

When entering a coroute and with init page correctly filled I cannot see any altitude on flight plan waypoints .
So, only open climb is available, what do I do wrong ?
of course no TC nor TOD appear.

On an other hand I cannot get fuel prédictions ...and fill the Aircraft accurately

jcdp

To calculate vertical and speed profile FMGS should know block fuel and ZFW. Sure Init B page should be complete

Please read a FAQ before you post a bug http://support.jardesign.org

46 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

Milo1404 wrote:

I was doing the MCDU entries and when i click to enter the flightlevel and the temp x plane crashes

I want to get this on my side. Can I ask you describe all details - what plan you try to enter, in what moment you get crash and so on. This is early beta-tests - issues may/should happen - need info to fix them, no more. Please.

Please read a FAQ before you post a bug http://support.jardesign.org

47 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

MrGeeBee wrote:

Been able to fly some finally, there are serious issue with programming the MCDU routes. It constantly crashes on, what it looks like, longer routes. But overall it's a great update still! Thanks again JarDesign.

Some wishes:

Mouse wheel knobs please.

Get your files. Will check in debugger.

Please read a FAQ before you post a bug http://support.jardesign.org

48 Reply by twinrix

  • twinrix
  • Member
  • Offline
  • Registered: 2015-05-02
  • Posts: 24

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

Anyone else completly lacking sounds (expect of fo/cabin crew) when using 330 together with xlife and x-atc chatter?

49 Reply by FalconEye

  • FalconEye
  • Member
  • Offline
  • Registered: 2018-01-28
  • Posts: 8

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

Hello guys,
First of all, congratulations on this beta!

Really nice:
3D moveable FMGS !!! :-)

Suggestion:
Possibility to save automatically settings changed in FMGS (like FPS MESSAGE to OFF)

Missing:
On ND, the distance on top right needs to be a decimal (like 2.3 NM)

Bugs:
VLS > VAPP, which looks strange (check enclosed screenshot)

When selecting GPS approach in LFBD via ROYAN8L STAR, transitions (like ETPAR) are missing.
However, it's possible to get them with previous A330 version.
I was not able to set an ALTN airport in FMGS. Maybe I didn't catch something...

I experienced a crash sim on a flight from LFMN to LFKJ. It happened once stabilizing at 3000 ft during the STAR, prior to fly the ILS02Z.
The log file is enclosed.

Thanks again!

Post's attachments

Attachment icon Desktop 04-02-2018 10-21-36-991.jpg 404.46 kb, 161 downloads since 2018-02-04 

Attachment icon Log.txt 92.98 kb, 441 downloads since 2018-02-04 

50 Reply by philwhite100

  • philwhite100
  • Member
  • Offline
  • Registered: 2015-05-02
  • Posts: 16

Re: v.3.0 beta 1, 2, 3, 4, 5, 6 public tests

I am getting that Pink windscreen with transparent squares effect. From memory i had this in previous versions but i cant remember what needed to be done to rectify it.