[ Closed ] X-Life ver 1.2 (Page 2 of 8)

Some sentences go out of window.

I had a similar experience. I got "Wrong ATIS" even though the QNH was at the correct setting, even according to ATIS. Then I requested again, with the same setting and got cleared. Also using SMP4, RWC1.1, NOAA and Venturasky.

Hi,
Would it be possible to increase the airtraffic density (more than the 150%)? On large airports I'd like to have more active aircrafts, like in reality.
greetings,
mika

Runway 35L at KMCO. Planes not moving for no reason. No planes on final approach and the runway is clear. Possible problem with logic? Using latest version 1.2 Vectoring works great thanks!

To my regret, the cooperation with JAR as designer has fallen out of the frame.

1. With the transition to XP11 is not clear any more are still making test flights with XP10 who has already has changed to XP11.
2  It is also unclear which aircraft model to be tested are compatible with XP10 and which were developed for XP11.
3. The test rubrike is transformed into a general mix of questions and answers, so it is difficult to separate the one from the other.
4. Clearly, however, the effectiveness of the test flights suffers and the developers usually get no useful information. Several test reviewers who provided much valuable information have simply disappeared in the last time.
5. In order to counter this negative development, in my opinion, a strict separation of test flight contributions and general questions must be introduced

Hi

Report:
Using XP11 b8 and A330 v2b4 I noticed that  "climb/crz/desc"   profile has disapeared when trying to get it on screen .
In flight plan generated with x-life there is no more altitude ...(could be the reason ...)
Attached log.txt
jcdp
PS:so of course no TC nor TOD in flight plan .

Hello! Tell navigation data must also be updated in the traffic navigation data to be taken from GNS430?

In preparation for a flight from KLGA to CYYZ the flight plan will not go over to the ATC.  The following message appears on the screen "Flight Plan error: Departure Airport Error" and the ATC stays blank.  See the first screen shot. I then hit the ATIS tab and the weather information is filled in, but the flight plan still does not go to the ATC.  See second screen shot.  Delivery, Ground and tower do not respond.  When I become airborne the ATC becomes active and functions throughout the rest of the flight. 
I am using X-Plane 10.51r2 and X-Life 1.2r2.  Log.txt is attached. 
I have both the dat and txt files for these two airports in the X-Life airport folder.  These were obtained from the Custom ATC routes on the X-Life web site.

This same situation has occurred for other flights since updating to X-Life 1.2r2.  At first I thought I was doing something wrong.

1. How can be seen that this is version 1.2?

2. Why is the file not given e number?
Now I have to spit in the files. I renamed it xlife060117.zip

Hi,

Are there any plans in the future for a version to work on Linux?

Thanks

LFPG is not a regulated airport in X-Live (I couldn't initiate traffic)
Inserting the FP from SimBrief  (go to Download page) into the FP folder of A330 and initiating it in the FMCU and the distance appears correctly..... 3380nm

1 Traffic at some uncertified airports don't work.
2 A route plan is not flying by itself into the Flight Plan folder.  You have to create the ".txt" route with SimBrief, Online Flight Planner or any other program and copy it to the A330 or/and X-Life "Dlight Plans" folder.....
3 If X-Life works (I got for LFPG an error message) then instal route with it. If not write your route "LFPGKJFK" on FMCU into co route.....