[ Closed ] X-Life public beta-6, 7, 8, 9 (Win & Mac) (Page 9 of 31)

**p_delray** · 2016-02-25 21:10:17

p_delray
Member
Offline

Registered: 2015-09-13
Posts: 16

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

No info,,,I get a message that I must stat X-Life in order for the flightplan window to open but the thing is X-Life is already started.

By the way amazing software! This will put X-Plane on top no doubt about it. As a scenery developer I am trying to learn all I can about how this all works so I can pass it on to others. I also posted to Mrx and he seemed very intrested in trying it out.

I am a big fan and trying to get more fans on board.

And I do not get any CTD with the update to 8, runs great with the converted KPDX with planes all over the place, coming and going.

**J.A.Romanov** · 2016-02-25 21:30:10

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

p_delray wrote:

No info,,,I get a message that I must stat X-Life in order for the flightplan window to open but the thing is X-Life is already started.
By the way amazing software! This will put X-Plane on top no doubt about it. As a scenery developer I am trying to learn all I can about how this all works so I can pass it on to others. I also posted to Mrx and he seemed very intrested in trying it out.
I am a big fan and trying to get more fans on board.
And I do not get any CTD with the update to 8, runs great with the converted KPDX with planes all over the place, coming and going.

Thanks! Anyway - log.txt may help to understand situation. Sure, I see what power button is on, but also i should know some internal details to try get this situation at my computer for debug.

Please read a FAQ before you post a bug http://support.jardesign.org

**p_delray** · 2016-02-25 22:37:40

p_delray
Member
Offline

Registered: 2015-09-13
Posts: 16

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

No real problem,,I am trying to make it work with some of my smaller airports I made and I think there is something I am missing. I set up for ATC, tower, ground, delivery (some of the small airports don't have all the coms). And I set the taxi lines per instructions but because they are small these airports don't get a lot of traffic.

One question: about the window that comes up where you can adjust the sliders for traffic ground and air there is a box at the top to type in an aircraft or number and select - what doe it do and what do I enter into the selection box?

Thanks again for all your work on this.

**Acei** · 2016-02-25 22:46:08

Acei
Member
Offline

Registered: 2015-05-26
Posts: 128

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

captbullett wrote:

Good day,
So, the timing is off how do we fix this it is in the XPL file and the code right so JAR needs the bbox.txt so he can debug it I think but you might wait a min. or so to see if the aircraft will move before moving forward this might get the timing back on track.
B.

Don't think waiting will do anything as I received the instruction to line up. bbox file attached.

Post's attachments

bbox_log.txt 26.09 kb, 294 downloads since 2016-02-25

**BluesmanEP** · 2016-02-25 22:49:13

BluesmanEP
Member
Offline

Registered: 2015-08-10
Posts: 28

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

hey JAR. I had an issue when upgrading to beta version 8. If I only replaced the win.xpl file I got the traffic to load, but nothing moved. If I deleted the whole x-life folder (keeping the airports folder, and my .reg file), and installed the whole thing new it worked again.

Just FYI

**captbullett** · 2016-02-26 01:30:45

captbullett
Member
Offline

Registered: 2015-04-08
Posts: 975

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

Good day,
this is not X-Life but the airport error and the work done on the dat.txt and or the .txt in the FM file Airport I was having error messages but due to scenery errors not XL.
I will get more data on this and send in.

But, other than this the KSNA is another airport that has the same issue with scenery error messages . no other like LIRF ok just tried it and it populated with no issues.
Your friend,
captbullett

p_delray wrote:

No info,,,I get a message that I must stat X-Life in order for the flightplan window to open but the thing is X-Life is already started.
By the way amazing software! This will put X-Plane on top no doubt about it. As a scenery developer I am trying to learn all I can about how this all works so I can pass it on to others. I also posted to Mrx and he seemed very intrested in trying it out.
I am a big fan and trying to get more fans on board.
And I do not get any CTD with the update to 8, runs great with the converted KPDX with planes all over the place, coming and going.

**mauricetimocohen** · 2016-02-26 02:14:33

mauricetimocohen
New member
Offline

Registered: 2016-02-17
Posts: 4

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

I am not sure if this has been reported, but with beta 8 I get error messages in the log.txt file that references to OpensceneryX aircraft fail to open objects and fail to load objects. I have just updated my OpensceneryX library and I see that the paths to the various aircraft are incorrect (for example X-Plane 10/Custom Scenery/OpenSceneryX/objects/aircraft/jets/heavy/b767-300/jal/object.obj should read .... jal/cargo/object.object) or lead to empty folders (for example X-Plane 10/Custom Scenery/OpenSceneryX/objects/aircraft/jets/corporate/citation_x/unlit/object.obj because ...citation_x/unlit is actually empty).

Here is the relevant portion of the log.txt file:

Post's attachments

Errors X-Life.rtf 3.02 kb, 266 downloads since 2016-02-25

**Sloboda** · 2016-02-26 05:43:05

Sloboda
Member
Offline

From: Fécamp, France
Registered: 2015-10-04
Posts: 233

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

Hello JA,

that' OK, i had can purchase XL yesterday. Very cool ! Very good !

I have several suggestions for ATC box:

- I think you could add an option for activate voice or not when pilot talk. (and not just when ATC talk)

- I think it's not very good to have sentences's suggestions when we are not on the good radio's channel

- So, I think the suggestions may appears when the "pilot" click on the good button (ground, tower, departure...) OR when he change the channel on his radio and he's on the good channel.

- I think ATC tell the channel to contact when we must conctact another service. Example: "Ground, authorize for Taxi B757XXX, contact tower on 134.25 when you are on hold point." Why ? Cause on the big airports, there are many channel for the same service and ATC must say to pilot witch channel he must contact.

Thank you, bye.

VOICECOMMANDER CREATOR. Free and PRO profiles available on https://xplane.amisinformatique.com/

Windows 10 64bits – 6 coeurs I7 4,5 GHz - SSD – 32Go RAM – nVidia GTX Titan X 12Go – X-Plane 11 - A320 Neo Jardesign – A330 Jardesign - A350 FF - B777 FF - B767 FF - B757 V2 FF - Rotate MD80 - B737 IXEG - GH Deluxe - FollowMe - X-Life Deluxe

**J.A.Romanov** · 2016-02-26 07:12:54

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

p_delray wrote:

No real problem,,I am trying to make it work with some of my smaller airports I made and I think there is something I am missing. I set up for ATC, tower, ground, delivery (some of the small airports don't have all the coms). And I set the taxi lines per instructions but because they are small these airports don't get a lot of traffic.
One question: about the window that comes up where you can adjust the sliders for traffic ground and air there is a box at the top to type in an aircraft or number and select - what doe it do and what do I enter into the selection box?
Thanks again for all your work on this.

You will see the ground route of aircraft with this entered number. Example - user aircraft is 0.

Please read a FAQ before you post a bug http://support.jardesign.org

**J.A.Romanov** · 2016-02-26 07:15:39

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

BluesmanEP wrote:

hey JAR. I had an issue when upgrading to beta version 8. If I only replaced the win.xpl file I got the traffic to load, but nothing moved. If I deleted the whole x-life folder (keeping the airports folder, and my .reg file), and installed the whole thing new it worked again.
Just FYI

Are you update was from beta 7 to beta 8? O may be b6-b8?

Please read a FAQ before you post a bug http://support.jardesign.org

**J.A.Romanov** · 2016-02-26 07:18:37

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

mauricetimocohen wrote:

I am not sure if this has been reported, but with beta 8 I get error messages in the log.txt file that references to OpensceneryX aircraft fail to open objects and fail to load objects. I have just updated my OpensceneryX library and I see that the paths to the various aircraft are incorrect (for example X-Plane 10/Custom Scenery/OpenSceneryX/objects/aircraft/jets/heavy/b767-300/jal/object.obj should read .... jal/cargo/object.object) or lead to empty folders (for example X-Plane 10/Custom Scenery/OpenSceneryX/objects/aircraft/jets/corporate/citation_x/unlit/object.obj because ...citation_x/unlit is actually empty).
Here is the relevant portion of the log.txt file:

Thanks or report! I will check on my side too.

Please read a FAQ before you post a bug http://support.jardesign.org

**J.A.Romanov** · 2016-02-26 07:20:22

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

Sloboda wrote:

Hello JA,
that' OK, i had can purchase XL yesterday. Very cool ! Very good !
I have several suggestions for ATC box:
- I think you could add an option for activate voice or not when pilot talk. (and not just when ATC talk)
- I think it's not very good to have sentences's suggestions when we are not on the good radio's channel
- So, I think the suggestions may appears when the "pilot" click on the good button (ground, tower, departure...) OR when he change the channel on his radio and he's on the good channel.
- I think ATC tell the channel to contact when we must conctact another service. Example: "Ground, authorize for Taxi B757XXX, contact tower on 134.25 when you are on hold point." Why ? Cause on the big airports, there are many channel for the same service and ATC must say to pilot witch channel he must contact.
Thank you, bye.

May be yes, i dont know. Sure, in real you can say wrong request to wrong channel too. I will think.

Please read a FAQ before you post a bug http://support.jardesign.org

**pic** · 2016-02-26 09:07:31

pic
Member
Offline

From: Tardis, somewhere in time,Univ
Registered: 2015-04-14
Posts: 129

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

Hi Mr. R.,
Loaded up the new beta 8....P.E.R.F.E.C.T.O.! Everything worked perfectly! I'm gonna try it on x-plane beta45 now and see if it works. Thank you again for such an Excellent immersion plug-in. LOVE IT!!!!!
ciao
di Luigi
edit
Perfect in xplane Beta too. Had to take settings file from 1042 xplane/xlife since the settings panel for xlife in xplane beta was stuck again, doing the 2fpm bit..but changing that put it to perfecto! Off to the RL airport now

“The universe is big. It’s vast, complicated and ridiculous. And sometimes, very rarely, impossible things just happen and we call them miracles.”The Doctor
Win7Pro64/i76700k 4.6/GTX 1080ti STRIX oc/32gbCorsairVengeance DD4Ram3000/ASUS Z170Deluxe

**J.A.Romanov** · 2016-02-26 12:02:33

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

Thanks! Dear pilots, please reports anyway, if beta 8 work or nor work. If not work (crashed), please attach log.txt file. Sure, i read all your reports. Not ansver every time, but take in account anyway.

Please read a FAQ before you post a bug http://support.jardesign.org

**mauricetimocohen** · 2016-02-26 13:03:57

mauricetimocohen
New member
Offline

Registered: 2016-02-17
Posts: 4

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

When pressing the airplane button to make text of aircraft info appear or disappear, when in the air (text blue), the airplane also disappears.

**p_delray** · 2016-02-26 13:10:49

p_delray
Member
Offline

Registered: 2015-09-13
Posts: 16

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

Thanks for answering our questions Jar.

I was wondering what happens when the airport gets populated using X-Life but then nothing moves. Nothing on the radar and no ground movement even after 20 minutes of waiting.

I have just tried a converted airport that works for some but for me all is queit and still.

**MH1212** · 2016-02-26 13:29:58

MH1212
Member
Offline

Registered: 2016-02-21
Posts: 8

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

OK, I have tried everything to get it working reliable. I must admit that I am frustrated by now by the lack of information in the logs.
Some airports work, other half and others do nothing.
NB1: every airport I tried has basically the same layout -> if one works why not the others as well??
NB2: for he FM car is the same: sometimes it works, most of the time not...

I uploaded 2 examples:
EGJB: traffic loads, but no departures (sometimes arrivals) . Sometimes 1 line (DEP) just disappears and becomes blank. FM car does not work
EBBX: X-Life gives error: LFSJ airport (??) not compatible. FM car reports: EBBX not compatible??

For now I give up. I will try again with future releases... I really hope you can improve it, the concept is still great!

Good luck!

Post's attachments

Apt.dat log.txt and images.zip 6.49 mb, 483 downloads since 2016-02-26

**mauricetimocohen** · 2016-02-26 13:34:33

mauricetimocohen
New member
Offline

Registered: 2016-02-17
Posts: 4

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

p_delray wrote:

Thanks for answering our questions Jar.
I was wondering what happens when the airport gets populated using X-Life but then nothing moves. Nothing on the radar and no ground movement even after 20 minutes of waiting.
I have just tried a converted airport that works for some but for me all is queit and still.

I had that happen and then I read on the x-plane forum that it might be due to having the sliders at max in settings. I reduced to default and traffic reappeared! JAR please take note.

**dadez77** · 2016-02-26 13:41:50

dadez77
Member
Offline

Registered: 2015-05-28
Posts: 67

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

J.A.Romanov wrote:

Thanks! Dear pilots, please reports anyway, if beta 8 work or nor work. If not work (crashed), please attach log.txt file. Sure, i read all your reports. Not ansver every time, but take in account anyway.

Hi,

have you some news for my problem of missing possibility to annuce the TD to center?

I've jus try another flight LIRF-LFMN but same problem, sorry for missing logs but i was angry and frustrated and I quickly turned off the computer, now they are in the office, in the evening I will post all

**Dewald** · 2016-02-26 14:53:46

Dewald
Member
Offline

Registered: 2016-02-01
Posts: 55

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

Hi guys. I also don't get options when at TOD.
Approach and landed without ATC.
Maybe we are not setting up the flight plan properly.
Maybe you can just post a quick a to z on how to do the flight from gate to gate.

**Sloboda** · 2016-02-26 14:58:57

Sloboda
Member
Offline

From: Fécamp, France
Registered: 2015-10-04
Posts: 233

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

J.A.Romanov wrote:

Sloboda wrote:
Hello JA,
that' OK, i had can purchase XL yesterday. Very cool ! Very good !
I have several suggestions for ATC box:
- I think you could add an option for activate voice or not when pilot talk. (and not just when ATC talk)
- I think it's not very good to have sentences's suggestions when we are not on the good radio's channel
- So, I think the suggestions may appears when the "pilot" click on the good button (ground, tower, departure...) OR when he change the channel on his radio and he's on the good channel.
- I think ATC tell the channel to contact when we must conctact another service. Example: "Ground, authorize for Taxi B757XXX, contact tower on 134.25 when you are on hold point." Why ? Cause on the big airports, there are many channel for the same service and ATC must say to pilot witch channel he must contact.
Thank you, bye.
May be yes, i dont know. Sure, in real you can say wrong request to wrong channel too. I will think.

For this point, that's sure, but for others...

We don't know witch frequency we must call and the buttons don't change frequencies on radio. So, we don't know on witch frequency we are. Perhaps you could too color the active frequency (button).

And in reality, you can have several frequencies for each service. So, ATC must tell us witch Freq we must contact. And you set frequencies on radio.

Thank you for interest to my question.
Bye.

VOICECOMMANDER CREATOR. Free and PRO profiles available on https://xplane.amisinformatique.com/

Windows 10 64bits – 6 coeurs I7 4,5 GHz - SSD – 32Go RAM – nVidia GTX Titan X 12Go – X-Plane 11 - A320 Neo Jardesign – A330 Jardesign - A350 FF - B777 FF - B767 FF - B757 V2 FF - Rotate MD80 - B737 IXEG - GH Deluxe - FollowMe - X-Life Deluxe

**p_delray** · 2016-02-26 15:02:45

p_delray
Member
Offline

Registered: 2015-09-13
Posts: 16

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

The sliders for density of traffic cause traffic to not appear if they are set too high. I think it has to do with the JAR Clever Plugin where the software is adjusted to the power or lack of power of your pc.

I wish there was a way to overide this Clever Plugin capping system so I could decide how much too use rather than let the software decide how much I can use.

**J.A.Romanov** · 2016-02-26 15:06:24

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

MH1212 wrote:

OK, I have tried everything to get it working reliable. I must admit that I am frustrated by now by the lack of information in the logs.
Some airports work, other half and others do nothing.
NB1: every airport I tried has basically the same layout -> if one works why not the others as well??
NB2: for he FM car is the same: sometimes it works, most of the time not...
I uploaded 2 examples:
EGJB: traffic loads, but no departures (sometimes arrivals) . Sometimes 1 line (DEP) just disappears and becomes blank. FM car does not work
EBBX: X-Life gives error: LFSJ airport (??) not compatible. FM car reports: EBBX not compatible??
For now I give up. I will try again with future releases... I really hope you can improve it, the concept is still great!
Good luck!

May be you are missed something.. This is a verified airports map - https://www.google.com/maps/d/edit?mid= … ecn3NB3GZ8

Other airports have a small chance to work well - they are may have not checked ATC-taxiroutes.

Please read a FAQ before you post a bug http://support.jardesign.org

**MH1212** · 2016-02-26 15:11:26

MH1212
Member
Offline

Registered: 2016-02-21
Posts: 8

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

J.A.Romanov wrote:

MH1212 wrote:
OK, I have tried everything to get it working reliable. I must admit that I am frustrated by now by the lack of information in the logs.
Some airports work, other half and others do nothing.
NB1: every airport I tried has basically the same layout -> if one works why not the others as well??
NB2: for he FM car is the same: sometimes it works, most of the time not...
I uploaded 2 examples:
EGJB: traffic loads, but no departures (sometimes arrivals) . Sometimes 1 line (DEP) just disappears and becomes blank. FM car does not work
EBBX: X-Life gives error: LFSJ airport (??) not compatible. FM car reports: EBBX not compatible??
For now I give up. I will try again with future releases... I really hope you can improve it, the concept is still great!
Good luck!
May be you are missed something.. This is a verified airports map - https://www.google.com/maps/d/edit?mid= … ecn3NB3GZ8
Other airports have a small chance to work well - they are may have not checked ATC-taxiroutes.

Perhaps you could give a look: I have included both apt.dat files -> I would be very glad if you could tell me what I missed! WED reports no errors and groundroutes tools for WorldTraffic work also fine for these airports. So what should I change to make them work with X-Life and Fm car??

Thanks!

**J.A.Romanov** · 2016-02-26 15:11:44

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

Dewald wrote:

Hi guys. I also don't get options when at TOD.
Approach and landed without ATC.
Maybe we are not setting up the flight plan properly.
Maybe you can just post a quick a to z on how to do the flight from gate to gate.

Sure, need use flightplan menu and prepare/send flightplan to ATC. This is only way how ATC will know about your arrival airport.

Another, what you need - check what you are reach cruize FL, what you are entered to flightplan

If both are Ok - Report TOD should be available.

Please read a FAQ before you post a bug http://support.jardesign.org

[ Closed ] X-Life public beta-6, 7, 8, 9 (Win & Mac) (Page 9 of 31)

Posts: 201 to 225 of 774

201 Reply by p_delray 2016-02-25 21:10:17 (edited by p_delray 2016-02-25 21:10:50)

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

202 Reply by J.A.Romanov 2016-02-25 21:30:10

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

203 Reply by p_delray 2016-02-25 22:37:40

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

204 Reply by Acei 2016-02-25 22:46:08

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

205 Reply by BluesmanEP 2016-02-25 22:49:13

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

206 Reply by captbullett 2016-02-26 01:30:45 (edited by captbullett 2016-02-26 01:31:34)

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

207 Reply by mauricetimocohen 2016-02-26 02:14:33 (edited by mauricetimocohen 2016-02-26 02:19:47)

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

208 Reply by Sloboda 2016-02-26 05:43:05

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

209 Reply by J.A.Romanov 2016-02-26 07:12:54

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

210 Reply by J.A.Romanov 2016-02-26 07:15:39

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

211 Reply by J.A.Romanov 2016-02-26 07:18:37

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

212 Reply by J.A.Romanov 2016-02-26 07:20:22

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

213 Reply by pic 2016-02-26 09:07:31 (edited by pic 2016-02-26 10:44:38)

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

214 Reply by J.A.Romanov 2016-02-26 12:02:33

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

215 Reply by mauricetimocohen 2016-02-26 13:03:57

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

216 Reply by p_delray 2016-02-26 13:10:49

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

217 Reply by MH1212 2016-02-26 13:29:58 (edited by MH1212 2016-02-26 13:31:16)

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

218 Reply by mauricetimocohen 2016-02-26 13:34:33

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

219 Reply by dadez77 2016-02-26 13:41:50

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

220 Reply by Dewald 2016-02-26 14:53:46

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

221 Reply by Sloboda 2016-02-26 14:58:57

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

222 Reply by p_delray 2016-02-26 15:02:45

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

223 Reply by J.A.Romanov 2016-02-26 15:06:24

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

224 Reply by MH1212 2016-02-26 15:11:26

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

225 Reply by J.A.Romanov 2016-02-26 15:11:44

Re: X-Life public beta-6, 7, 8, 9 (Win & Mac)

Posts: 201 to 225 of 774