You are not logged in. Please login or register.
JARDesign Group Board → Updates & General Discussion → X-Life public beta-6, 7, 8, 9 (Win & Mac)
Hi,
in attach my error during the registration for delux when enter my email-thanks in advance
You just enter "46e9-9222" as email. I delete it now. Please try again.
dadez77 wrote:Hi,
in attach my error during the registration for delux when enter my email-thanks in advance
You just enter "46e9-9222" as email. I delete it now. Please try again.
Perfect, it's works now..
thanks a lot, begin my tests
Hi to all,
First test flight with beta 6 from LOWS to LOWW without any problems, ATC and all other stuff seems to be correct.
perfect work to Evgeny and the team
I'm so sad. Beta6 crashes XP on start.
Beta5 worked fine, nothing else changed.
Log.txt 7.35 kb, 453 downloads since 2016-02-17
OSX-Crash.txt 59.35 kb, 542 downloads since 2016-02-17
I'm so sad. Beta6 crashes XP on start.
Beta5 worked fine, nothing else changed.
Yep, I see what function have crash. Thanks for log. I ask you to full delete current X-Life installation, redownload and reinstall X-Life and run. Please report if Ok. If no luck, please contact me direct via skype j.a.romanov - I will try to build debug version for you to determinate exact place with error.
Hi laohu314,
i had the same problem
now it works: x-plane 10.42 (not 10.45rc1 or rc2 or what else), install beta 6 and register -> and it works
check it out
Thanks SirOTheOne!
Wow. Isn't that a bit retrograde. How do I get 10.42 back?
Well, 10.42 reinstalled and same thing. CTD on start.
Very disappointing! Maybe it is because I am running OS X 10.11.3
I am not going to downgrade the OS. If new software doesn't run on the latest OS, it's useless IMHO.
Should work with ElCapitan, sure.
Are you reinstall X-Life?
If yes - only way to check this via skype..
Should work with ElCapitan, sure.
Are you reinstall X-Life?
If yes - only way to check this via skype..
Thanks Evgeny!
Yes, I did re-install X-Life as well.
I seem to have other problems now too. After downgrading to 10.42 and upgrading again to 10.45 my X-Plane quits constantly and FlyWithLua seems to be fried as well. So I need to sort out my installation. Maybe a clean new 10.42? Did you try 10.45rc2?
Once I have a stable XP and if XL is still not working I might try to contact you via Skype.
Good day,
you might be right on the 10.11.3 since, I have been able to run one flight on the Beta 6 with good results and I am running 10.10.5 so far I also changes the XML that was posted by JAR.
captbullett
Well, 10.42 reinstalled and same thing. CTD on start.
Very disappointing! Maybe it is because I am running OS X 10.11.3
I am not going to downgrade the OS. If new software doesn't run on the latest OS, it's useless IMHO.
Happy to report that I was now able to register b6 and generate a flight plan (XP10.45r2, OS X 10.11.3, and newly downloaded XL). Since I still have Lua issues I didn't go further.
The culprit might have been that I had HDR turned off while I was trying to cope with my dismal FPS situation.
Evgeny, you might want to check if that is true.
XL DOES ROCK!
Good Day,
Ok, now I have used all Airbuses since, I started testing but the flight I am working on now the DHC-6 is the first 3-Party aircraft i am using why DHC-6 because, it is an aircraft where I know the radios and transponder are easy to use which is a pre-requisite for X-Life since, we have to now set to the right frequencies and the DHC-6 just happens to be very easy to do just that.
For me this is phase 2 of testing to see which other aircraft will be the easiest to work with within XL.
captbullett
You're welcome, Sir 
Hello JAR,
with x-plane 10.42 the plugin (beta 6) and the license agreement works.
Thanks to pic, it works
Hi Mr. Romanov,
Really nor, but for this development stage it is a way to guarantee what airport is really ready. Else, plugin should check apt.dat to determinate if all needed data present inside. I will fix this for next stage.
I got it working.
Maybe interesting for others who want to add ATC routes:
1) You can use x-plane WED to add ATC routes.
2) assign correct plane types to pads, or you will see an A380 on a 1000m runway
3) export apt.dat, this file belongs to customscenery\XXXX (e.g. CustomScenery/EDNY/)
This is usually enough for:
- getting FMCar working
- getting X-Life Traffic working
what does not work: X-Life route generation.
4) in xplane, start x-life gate editor.
5) assign plane sizes to gates, define which plane size every gate can handle
(yes, it's the same what is done in WED editor....)
6) Save it ! This will generate a text file (e.g. EDNY.txt) in x-life/airports/
This file is important. no XXXX.txt -> no route generation
Now route generation in x-life is working.
best regards,
Hi, will the tug master can also call by x-life later?
Hi Evgeny,
small bug:
flying from EDDM to EGLL with short stop in EDDH
-) flying from EDDM to EDDH: everything okay, but departure in EDDH to EGLL wrong Delivery and ATIS (see .png)
a330_1.png 1.91 mb, 182 downloads since 2016-02-18
Hi, will the tug master can also call by x-life later?
Is this really need? cause I can..
Hi Evgeny,
small bug:
flying from EDDM to EGLL with short stop in EDDH
-) flying from EDDM to EDDH: everything okay, but departure in EDDH to EGLL wrong Delivery and ATIS (see .png)
Not understand what wrong. With ATIS? Please, some details!
Hi,
i've a crash of xp when click on airplane icon on x-life menu, in attacc the log.txt
I try again
thanks in advance
Log.txt 150.53 kb, 377 downloads since 2016-02-18
Hello.
Tried this in Nice airport. Works well but I cannot remove the licence box. Clicking read licence just brings me to this forum and I never get an 'agree' option. I have made Internet Explorer my default browser. PC is Windows 10 running 10.45RC2. Does it just not work yet on 10.45? If so I'll wait for an update because I don't want to downgrade.
From a first look this is excellent work (I really like all the JAR add-ons). Works very well without needing to use Python scripts etc. to make the ground routes (unlike World Traffic). I will try to make some WED ATC layouts for more UK airports.
Thanks again JAR.
I assume you will upgrade the AI plane models so the gear retracts, the wheels rotate etc. I guess that is the easy bit once the routings work well. Are you allowed to use the Bluebell aircraft packs on x-plane.org? They work really well in World Traffic.
Hello.
Tried this in Nice airport. Works well but I cannot remove the licence box. Clicking read licence just brings me to this forum and I never get an 'agree' option. I have made Internet Explorer my default browser. PC is Windows 10 running 10.45RC2. Does it just not work yet on 10.45? If so I'll wait for an update because I don't want to downgrade.
From a first look this is excellent work (I really like all the JAR add-ons). Works very well without needing to use Python scripts etc. to make the ground routes (unlike World Traffic). I will try to make some WED ATC layouts for more UK airports.
Thanks again JAR.
I assume you will upgrade the AI plane models so the gear retracts, the wheels rotate etc. I guess that is the easy bit once the routings work well. Are you allowed to use the Bluebell aircraft packs on x-plane.org? They work really well in World Traffic.
Please use this hotfix to solve Read license issue
Need just delete old .xpl files from X-Life folder and put new.
mac.xpl 782.91 kb, 443 downloads since 2016-02-18
win.xpl 1.63 mb, 406 downloads since 2016-02-18
seraphim wrote:Hi, will the tug master can also call by x-life later?
Is this really need? cause I can..
Oh great idea...would be much appreciate!
I just received the error 'X-plane crashed due to plug-in X-life'. I know it's not helpful! But it has crashed 2 times at exactly the point of the flight, about 2-3 seconds after rotation during takeoff. Is this when X-life switches state? For example from a 'user on the ground' state to 'user in the air'. Aircraft was JAR 320 NEO and airport as the LFMN Nice add-on. I'll continue to test and disable other plug-ins but maybe others are having the plug-in crash just after take-off problem too.
The log text immediately before the crash says:
0:20:55.266 I/FLT: Init dat_p0 type:loc_ram apt:KFMN rwy 04R
OpenSceneryXpath find
Just complete my flight from Zurich to Heathrow, this is my problem:
-The delivery give me the clearence say "autorized to Zurich" (and not Heatrow)
-All ok for taxy, hold and short, line up ad take off-
-After take off The approach give me the first step for 9000ft and after to climb to fl370 (my cruise altitude), from that moment I not have received any other instructions, i'm arrived to the gate at EGLL in abolute silence from ATC
In the radar I could see the planes in flight but arrived at the airport EGLL was desert. The traffic was on
Attach the log, i hope could be helpful
Log.txt 253.56 kb, 431 downloads since 2016-02-18
JARDesign Group Board → Updates & General Discussion → X-Life public beta-6, 7, 8, 9 (Win & Mac)
Powered by PunBB, supported by Informer Technologies, Inc.