You are not logged in. Please login or register.
JARDesign Group Board → Beta-versions (Download & Discussions) → ver 2.6 beta 4 WIN/MAC 64 bit
Hello,
after Departure EDFH RWY21 SID RUDU7S the corner lost from the Waypoint
but the display was correct before take off
20160114_211748.jpg 1.84 mb, 138 downloads since 2016-01-14
Just a facts About "aircraft not follow flightplan" issue:
I get several reports about success solution for this issue - uninstall Gizmo.
Usually - enough to delete affected plugins like this way http://www.jardesign.org/ticket/kb/faq.php?id=38
But for several cases, when this procedure was not help, users try to delete Gizmo with luck for a320/330.
Just a facts About "aircraft not follow flightplan" issue:
I get several reports about success solution for this issue - uninstall Gizmo.
Usually - enough to delete affected plugins like this way http://www.jardesign.org/ticket/kb/faq.php?id=38
But for several cases, when this procedure was not help, users try to delete Gizmo with luck for a320/330.
give it a way to compatibel with Gizmo in the future?
The VOR approach to KLAS is still drawing some odd lines.
(KPDX) CASCD2 PAWLI YERIN LIDAT BTY SUNST3 (KLAS) VOR Runway 25L
This is the ILS approach which looks fine:
J.A.Romanov wrote:Just a facts About "aircraft not follow flightplan" issue:
I get several reports about success solution for this issue - uninstall Gizmo.
Usually - enough to delete affected plugins like this way http://www.jardesign.org/ticket/kb/faq.php?id=38
But for several cases, when this procedure was not help, users try to delete Gizmo with luck for a320/330.
give it a way to compatibel with Gizmo in the future?
Yes, with easy way. If some plugin (what really should not work now, cause its functions not used) always load in memory BEFORE aircraft, change X-Plane paramerers, affect other plugins work, collect users data, need just delete it, cause (IMHO) this plugin just control you. But right and safety way - when you control plugin. I dont know about Gizmo exact, but plugin like SeaTraffic and some other - a320/330 killers in 90% cases.
Good day,
Gizmo runs SMPv3 so, it is hard to get rid of Gizmo also the DC-3 I use let's see what else, that's just off the top of my head so yes Gizmo while, not needed for Jar Needed for one of the big Plugins used in XP so ow do we work with it in harmony. and i talk to Gizmo before, and they say not Gizmo but SASL issue and I tend to believe that is the case I do not have issues with Gizmo but I do believe other aircraft SASL code is the issue and it is causing bugs, which I can't go int to at this level it is an engineering level issue.
Brian
everstalker wrote:J.A.Romanov wrote:Just a facts About "aircraft not follow flightplan" issue:
I get several reports about success solution for this issue - uninstall Gizmo.
Usually - enough to delete affected plugins like this way http://www.jardesign.org/ticket/kb/faq.php?id=38
But for several cases, when this procedure was not help, users try to delete Gizmo with luck for a320/330.
give it a way to compatibel with Gizmo in the future?
Yes, with easy way. If some plugin (what really should not work now, cause its functions not used) always load in memory BEFORE aircraft, change X-Plane paramerers, affect other plugins work, collect users data, need just delete it, cause (IMHO) this plugin just control you. But right and safety way - when you control plugin. I dont know about Gizmo exact, but plugin like SeaTraffic and some other - a320/330 killers in 90% cases.
I am still mystified that I still can't arm the spoilers or adjust the airbrakes manually on the A320neo? or adjust the flaps manually either. Am I missing something as they work perfectly on the A330? I do have the Saitek X52 set attached.
My only way around it is to have a key input for full airbrake and I have to hit the button on landing... but I need to arm the brakes!
SD@X-PlaneReviews
Use keyboard buttons 3 and 4 to retract/ arm and extend the speed brakes/ ground spoilers.
Use keyboard buttons 1 and 2 to retract and extend the flaps.
I did a few test.
Problem with BRAKES. I dont have an idea!!
(sometimes Before TAXING, also sometimes After LANDING)
I did a few test.
Problem with BRAKES. I dont have an idea!!
(sometimes Before TAXING, also sometimes After LANDING)
You can contact me via skype to discuss this.
Has anyone noticed that the Autogate bells no longer work with this latest beta? The gates dock and undock correctly but the bells (which were previously working) no longer seem to work.
They work here. I know the ground handling plugin they have caused some sound issues on some aircraft...did you apply the patch for that? I think that may be specific to the A330...anyhow if you have it and didn't patch it, that may be your problem.
Hi, CLB, CRZ and DES speeds in managed mode do not change upon changing CI in v2.6.
Working fine in v2.5, while it appears to be broken in all 2.6 betas. Is it a known bug or it's only me? Thanks.
Log.txt 52.89 kb, 264 downloads since 2016-01-19
Hi JAR,
Thanks for the update. Hand-flying of this model is quite awesome and feels great.
One thing to mention is that: when in selected mode (HDG) the active flight plan doesn't turn into dashed line.The ND should draw the active fpln in dashed green as the pic shown below.
Will it get fixed in the future? Many thanks.
Shane
Would like to get this behavior either.
Thanks gpb500 I will apply the patch and observe the effects.
Update: Well I applied the patch you linked to but it did not resolve the issue of no bells on the Autogates.
I am still mystified that I still can't arm the spoilers or adjust the airbrakes manually on the A320neo? or adjust the flaps manually either. Am I missing something as they work perfectly on the A330? I do have the Saitek X52 set attached.
My only way around it is to have a key input for full airbrake and I have to hit the button on landing... but I need to arm the brakes!
SD@X-PlaneReviews
You can assign a joystick axis for the speedbrakes. I use Saitek X52 pro.
To arm spoilers you can assign a joystick button or key. the command is named "spoilers up one step" or similar.
flightime56 wrote:I am still mystified that I still can't arm the spoilers or adjust the airbrakes manually on the A320neo? or adjust the flaps manually either. Am I missing something as they work perfectly on the A330? I do have the Saitek X52 set attached.
My only way around it is to have a key input for full airbrake and I have to hit the button on landing... but I need to arm the brakes!
SD@X-PlaneReviews
You can assign a joystick axis for the speedbrakes. I use Saitek X52 pro.
To arm spoilers you can assign a joystick button or key. the command is named "spoilers up one step" or similar.
If you read my notes I have already done that and that is the way I fly now... But you can't set the airbrakes to arm? But you can on the A330?
I read your message.
Flying the A320 I can press my joystick
button and the spoilers get armed. There is a status information
on ECAM saying "SPLRS ARMED" and the artificial copilot confirms that by saying "spoilers armed" or if i disarm: "spoilers disarmed".
The single easiest way to get the spoilers set, is to use the up one notch and down one notch in the expanded menu of the keyboard assignments. This way you will go through the entire range of the spoilers I use a hat switch for it on my X52, and it works just fine
The single easiest way to get the spoilers set, is to use the up one notch and down one notch in the expanded menu of the keyboard assignments. This way you will go through the entire range of the spoilers I use a hat switch for it on my X52, and it works just fine
I'll try that as I have the spoilers set that way on the throttle... Thanks
The single easiest way to get the spoilers set, is to use the up one notch and down one notch in the expanded menu of the keyboard assignments. This way you will go through the entire range of the spoilers I use a hat switch for it on my X52, and it works just fine
That's what I meant :-)
v2.6B4 Can only select one display mode button (CSTR, NDB, VOR, APRT) for ND at a time. I like to select CSTR, VOR and APRT for approach and landing but each time i select one it deselects the other.
That's correct Airbus behavior...so not a bug.
That's correct Airbus behavior...so not a bug.
Good to know, thanks. I've reported this as a bug before, because in the final release you could've select multiple info to display on the ND.
ups i reported that as well, on the a320 it works bugged then
JARDesign Group Board → Beta-versions (Download & Discussions) → ver 2.6 beta 4 WIN/MAC 64 bit
Powered by PunBB, supported by Informer Technologies, Inc.
