[ Closed ] a320neo JARDesign ver 2.5 r1 WIN/MAC 64 bit (Page 1 of 6)

Good evening,

Flight from LFPO to LFML

T/C prediction with "error" from +/- 35-40 NM

Hi Jar, I've found that my problem of roll shaking is caused by poor fps.
Whenever they go below 30 (from green to red), and the A/P is activated, the roll starts shaking. This has been from b2.5 onward. Since my pc can't afford being always over 30 fps (I'm accepting to stay at 20-25 over EHAM, EDDF, EGLL etc.) is there anything I can do other than rolling back to v2.3/2.4? Thanks.

amischkowitz wrote:

    Good evening,

    Flight from LFPO to LFML

    T/C prediction with "error" from +/- 35-40 NM

Are you resave a320 with 10.40 PlaneMaker?

No at all, I don't have make anything with plane maker.
I just downloaded the latest 2.5 r1, activating these one and that's all.

Is it also necessary to make a process with plane maker to solved this T/C problem ?

Thanks a lot

ver 2.5 r1 WIN/MAC 64 bit
So, next 320 improvement.

So, the main goal of 2.5 is make it compatible with 2 external product - GHD and custom soundpack. 1-2 day and first Video with this soundpack will be ready. Ыome systems was improved (hydraulic system too) to make voices sound natural. No changes of flightplan system was made - this is task for next 2.6, not now. As you know may be, X-Plane 10.40 have changed airport data format and FMCar included in a320 pack not work propertly with it. I rework c++ separate plugin, but not reworked lua (a320 included) FMCar, but just exclude it for 2.5 and for future. I prefer this way, if someone - not - sorry. And about hypoxya effect (if you have it) - that is no addon bug, but x-plane. I just tested 10.41 first build - this problem solved there.

What new for 2.5:
+X-Plane 10.40 ready
+Ground Handling Deluxe plugin (not included) compatible
+FBW “roll” tuned for low airspeed
+ready for Custom 3D soundpacks (not included)
+ND Weather radar range extended
-Exclude FMCar service
+Add 1000 and 2500 ft callouts
+hydraulic system improve

Download link http://jardesign.org/a320/download/inst … V2.5r1.zip

HOW TO INSTALL:
  - be sure, what you use X-Plane 10.36 (stable only, not use betas, please)
  - copy unziped "320neo_JARDesign" folder to ..\X-Plane 10\Aircraft\ folder
  - start X-Plane 64 bit and open a320, activation window is show up
  - enter you serial key (Regcode), click NEXT and reopen aircraft via X-Plane menu
  - activation will work well with both MAC/WIN 64 bit

If your activations are over (activation error) - use contact email from official website http://airbus320neo.com/contact/

Are you saying that if I am on 10.40 that 2.5 r1 is not stable.

Hi,

i've this problem. during programming MCDU for flight from LIRF to LGAV i've received , as SID, (ivao) xibri5A via pepix7a. When i click, on f-plan menu, rw25, sid xibri5a and set via pepix7a de MCDU display a message "LGAV remove from route", in this case the FP is unusable, the only trick is not use VIA sector but , flying online, this is a big problem.

Thanks in advance

dadez77 wrote:

Hi,

i've this problem. during programming MCDU for flight from LIRF to LGAV i've received , as SID, (ivao) xibri5A via pepix7a. When i click, on f-plan menu, rw25, sid xibri5a and set via pepix7a de MCDU display a message "LGAV remove from route", in this case the FP is unusable, the only trick is not use VIA sector but , flying online, this is a big problem.

Thanks in advance

Update NavData? With Navigraph 1510 working well 2.5 b3/r1