Topic: CPL A321
After update a A321 TOLISS to v1.3 dont completed the flight control check... specifically does not listen to the rudder command...
1 2021-06-03 15:17:16 (edited by kostasxroma 2021-06-03 15:19:10)
Re: CPL A321
I'm having the same problem.
Re: CPL A321
...and not disabling speedbrake during After Landing Procedure...
Re: CPL A321
I have this for the Toliss A319 also and it still works.
5 2021-06-08 16:44:44 (edited by InnFazzer 2021-06-08 16:57:37)
Re: CPL A321
I was having the same issue after 1.3 update. Here is a workaround I just tested:
Make sure your original files are backed up before you modify them.
In the CHECKLIST.txt file, change following lines from 27 and -27 to 20. The original values of the lines you need to change are 27 and -27. Do not touch the lines with values of 0.5 and -0.5. You can try with an even lower value if this does not work for you.
[SYSTEMS.FLGHTCONT.Rudder]
It should be like this:
[SYSTEMS.FLGHTCONT.Rudder]<[-20.000000]
[SYSTEMS.FLGHTCONT.Rudder]>[20.000000]
Re: CPL A321
its working thank you so much!!!
InnFazzer wrote:
I was having the same issue after 1.3 update. Here is a workaround I just tested:
Make sure your original files are backed up before you modify them.
In the CHECKLIST.txt file, change following lines from 27 and -27 to 20. The original values of the lines you need to change are 27 and -27. Do not touch the lines with values of 0.5 and -0.5. You can try with an even lower value if this does not work for you.
[SYSTEMS.FLGHTCONT.Rudder]
It should be like this:
[SYSTEMS.FLGHTCONT.Rudder]<[-20.000000]
[SYSTEMS.FLGHTCONT.Rudder]>[20.000000]
Re: CPL A321
After updating to 1.3, Linda disappeared but can be heard. Please help.
Re: CPL A321
mahmoodbinkafil wrote:
After updating to 1.3, Linda disappeared but can be heard. Please help.
This is always happening. Best to re-install it, or try re-setting the voice recog from the menu, and re-load aircraft from dev menu
Re: CPL A321
InnFazzer wrote:
I was having the same issue after 1.3 update. Here is a workaround I just tested:
Make sure your original files are backed up before you modify them.
In the CHECKLIST.txt file, change following lines from 27 and -27 to 20. The original values of the lines you need to change are 27 and -27. Do not touch the lines with values of 0.5 and -0.5. You can try with an even lower value if this does not work for you.
[SYSTEMS.FLGHTCONT.Rudder]
It should be like this:
[SYSTEMS.FLGHTCONT.Rudder]<[-20.000000]
[SYSTEMS.FLGHTCONT.Rudder]>[20.000000]
HUH? 1.3? Are you talking about Toliss v1.3.x? Im running the latest of both Tollis and this addon and there is no such option in my checklist.txt 27 nor -27 and YET IM STILL HAVING THE RUDDER issue that Linda cannot see. So this is not a fix.