[ Closed ] CoPilot Beta-tests (Page 3 of 4)

Hi,

First off - Great work team, a very useful and innovative plug in!

I completed two full flights already using Sandy from cold and dark to shut down. Overall he works well very but I ran into just a couple off issues:

1. The flight control check list doesn't always complete first time. I found taking it slower helps but not always. Moving the joystick through the check again once its stuck seems to resolve it. This also happened on the 330 just the same.

2. In the descent ATC asked me to slow down so I went into managed speed mode but by the time I ran the Landing checklist I was back in managed mode. The check list insisted I read back 'OFF'when it should have been 'SPEED'

3. It should be possible to move the checklist text or turn it off in some sort of expert mode. The offset for the text and the flag to turn it on/off can be in an .ini or .cfg file as this is for advanced users.

4. He works a bit slowly. I sped up the speech text and this helps with the check list but not with procedures.

That's all for now, if I  find anything else I will update this or post again.

Kind regards, Chris

Small error in my modified ADIRS procedure:

Find:
if:sim/custom/xap/adirs/data_sel!5
and replace with
if:sim/custom/xap/adirs/data_sel!=5

Hi guys, is anyone experiencing with a320 vs 332 that the aircraft doesn't follow the planned route at takeoff and approach? Nav data fully up to date with navigraph. Example: Fly LPPT to LPFR (35 min air time), FL 190, 5000kg fuel, takeoff runway 3, Sid TROI5N, route TROIA A5 ODEMI Y101 USALU, star USALU6C, Runway 10 (ILS APP).
Beside that the airplane doesn't reach cruise alt at TOC (always around 3000ft below).
No announcement for "we are close to TOD".
Not activating automatically Approach fase.
Can anybody test this to see if I;m doing anything wrong. (I don't think it's me, but.... I fly this route with new Airplanes because I know it like the palms of my hands. Any runway, every app on both airports, it's where I learned to fly in real life (PPL).

Thank you! Let's see

Thanks!

Ok, we expect beta-update within few days. Thanks for your comments about first version.

In TAKE OFF PROCEDURES I included next commands from BeforeTakeoff_TL checklist and now I have ATC ON

saywait:A T C
pos:chlped
if:sim/custom/xap/atc/mode_sel==0
pos:atc on
drf:sim/custom/xap/atc/mode_sel=2
saywait:A T C on
endif:
pos:chlped

Works fine for me.

I really enjoy flying with Copilot and A320.

You need to run the Flight Control Checklist

@jeffleh, my understanding is that the Taxi Procedure requires that you have previously completed the Flight Controls Checklist. That is how it is set up. Otherwise it would be difficult for the Taxi Procedure to "know" that you have successfully completed the fight controls check.

Redownload and reinstall plugin. Restart you computer and check again.
If no luck - skype me please - we will check this online.

The beta version runs very well on my pc, but i have to buy Windows 10 pro, i had Windows 10 Home in spanish and i could not change language..but now F.O recognize every command..! really impressive!

Congrats!