151 Reply by enrigolan79

  • enrigolan79
  • enrigolan79
  • Member
  • Offline
  • From: La Rochelle
  • Registered: 2017-01-11
  • Posts: 86

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

@ satch10

try again without FlyWithLua plugin...

Win7x64/Sp1 - i7-6700k@4.2GHz - 32Go ddr3 - LCD : 19"(1280x1024)+32"(1920x1080)+19"(1280x1024)
Geforce GTX 1060 6Go - Saitek Proflight yoke and rudders - XP11.20r3
A320neoJDv3.2r1 & BSS PW1000 v4.0 sound pack - A330JDv3.0r4 & BBS PW1000v2.02 sound pack
GHdeluxe FMcar2.6r1  X-Lifedeluxe2.2r2  X-ATCchatter v1.5.3   LittleNavMap   xEnviro1.07

152 Reply by satch10

  • satch10
  • Member
  • Offline
  • From: UK
  • Registered: 2017-12-30
  • Posts: 40

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

@ enrigolan79

Thanks again for your time.

So, I have removed Fly with LUA.......same result.

I have removed FM Car and X Life.........same result.

I also removed the "diagnost" plugin from the A330 (I read somewhere that it may cause sound problem?) and the Navigraph Simlink.

As I stated in my first post...I am new to flight sims. I did a flight in the stock 737-800. If I'm honest I had forgotten how to fly it properly but sound was present all the time.

I have attached 3 more log files. At the top of the file I have written what action caused the loss of sound.....though I don't think there is anything in the logs which identifies the cause. When sound disappeared I immediately closed down X Plane. 1st log no sound at start up!

Kind regards

Post's attachments

Attachment icon Log.txt 128.66 kb, 555 downloads since 2018-01-30 

Attachment icon Log2.txt 937.7 kb, 531 downloads since 2018-01-30 

Attachment icon Log3.txt 1.8 mb, 533 downloads since 2018-01-30 

Intel i7-7700 @3.6GHz, GTX 1060 6Gb, 16Gb RAM. Saitek Pro yoke and 2nd quadrant, Saitek Multi panel, TM rudder.
X Plane 11.31, Jar A330, BSS sound pack, X LIfe, FM Car, ATC Chatter, XEnviro, Better pushback

153 Reply by ilankrt

  • ilankrt
  • Member
  • Offline
  • Registered: 2015-10-20
  • Posts: 774

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

satch10 wrote:

@ enrigolan79

Thanks again for your time.

So, I have removed Fly with LUA.......same result.

I have removed FM Car and X Life.........same result.

I also removed the "diagnost" plugin from the A330 (I read somewhere that it may cause sound problem?) and the Navigraph Simlink.

As I stated in my first post...I am new to flight sims. I did a flight in the stock 737-800. If I'm honest I had forgotten how to fly it properly but sound was present all the time.

I have attached 3 more log files. At the top of the file I have written what action caused the loss of sound.....though I don't think there is anything in the logs which identifies the cause. When sound disappeared I immediately closed down X Plane. 1st log no sound at start up!

Kind regards

Have you installed any further sound file (e.g. SoundMaxx, JAR BSS Sound package) ?

X-Plane 11.30r3 | iMac27 OSX Mojave 14.10.4, | Samsung ultra-wide screen 49-inch | Saitek equipment | MFG pedals |Gladiator Joystick | Plugins: GndHandling, RWC, SMP, SoundM, X-Life, BetterPushback, AutoGate, SoundMaxx, X-ATC-chatter, X-Camera | iPad 12.9, iPad Air 9.7  | Airliner: JAR A320/A330, FF A350XWB, FF B767, SSG B747-8 inter, Epic1000 new, TBM900  http://ilankrt1.blogspot.co.il

154 Reply by satch10

  • satch10
  • Member
  • Offline
  • From: UK
  • Registered: 2017-12-30
  • Posts: 40

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

I thought the problem had gone. I tried another flight.....everything OK. I got into the air, set the AP. After 30 minutes or so I went to get myself a drink. When I got back....the sound had gone (apart from wind noise). So I didn't interact at all but the engine sounds, switches, PA etc were lost.  sad

Intel i7-7700 @3.6GHz, GTX 1060 6Gb, 16Gb RAM. Saitek Pro yoke and 2nd quadrant, Saitek Multi panel, TM rudder.
X Plane 11.31, Jar A330, BSS sound pack, X LIfe, FM Car, ATC Chatter, XEnviro, Better pushback

155 Reply by satch10 (edited by satch10 2018-01-30 23:01:26)

  • satch10
  • Member
  • Offline
  • From: UK
  • Registered: 2017-12-30
  • Posts: 40

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

@ ilankrt

No, although I purchased the BSS package, I have removed it since updating to 330 2.2r3. I wanted to get rid of everything which could cause the problem. That is why I have removed all the plugins including X Life, FM Car etc.

Intel i7-7700 @3.6GHz, GTX 1060 6Gb, 16Gb RAM. Saitek Pro yoke and 2nd quadrant, Saitek Multi panel, TM rudder.
X Plane 11.31, Jar A330, BSS sound pack, X LIfe, FM Car, ATC Chatter, XEnviro, Better pushback

156 Reply by enrigolan79

  • enrigolan79
  • enrigolan79
  • Member
  • Offline
  • From: La Rochelle
  • Registered: 2017-01-11
  • Posts: 86

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

hello satch10,
sorry i have no more idea !!!

Win7x64/Sp1 - i7-6700k@4.2GHz - 32Go ddr3 - LCD : 19"(1280x1024)+32"(1920x1080)+19"(1280x1024)
Geforce GTX 1060 6Go - Saitek Proflight yoke and rudders - XP11.20r3
A320neoJDv3.2r1 & BSS PW1000 v4.0 sound pack - A330JDv3.0r4 & BBS PW1000v2.02 sound pack
GHdeluxe FMcar2.6r1  X-Lifedeluxe2.2r2  X-ATCchatter v1.5.3   LittleNavMap   xEnviro1.07

157 Reply by satch10

  • satch10
  • Member
  • Offline
  • From: UK
  • Registered: 2017-12-30
  • Posts: 40

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

Hi enrigolan79

Thank you very much for your time trying to help me.

Intel i7-7700 @3.6GHz, GTX 1060 6Gb, 16Gb RAM. Saitek Pro yoke and 2nd quadrant, Saitek Multi panel, TM rudder.
X Plane 11.31, Jar A330, BSS sound pack, X LIfe, FM Car, ATC Chatter, XEnviro, Better pushback

158 Reply by ilankrt (edited by ilankrt 2018-01-31 13:25:47)

  • ilankrt
  • Member
  • Offline
  • Registered: 2015-10-20
  • Posts: 774

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

satch10 wrote:

@ ilankrt

No, although I purchased the BSS package, I have removed it since updating to 330 2.2r3. I wanted to get rid of everything which could cause the problem. That is why I have removed all the plugins including X Life, FM Car etc.

After you removed the BSS package did you reinstalled the original "Sound3D' folder ?

X-Plane 11.30r3 | iMac27 OSX Mojave 14.10.4, | Samsung ultra-wide screen 49-inch | Saitek equipment | MFG pedals |Gladiator Joystick | Plugins: GndHandling, RWC, SMP, SoundM, X-Life, BetterPushback, AutoGate, SoundMaxx, X-ATC-chatter, X-Camera | iPad 12.9, iPad Air 9.7  | Airliner: JAR A320/A330, FF A350XWB, FF B767, SSG B747-8 inter, Epic1000 new, TBM900  http://ilankrt1.blogspot.co.il

159 Reply by satch10

  • satch10
  • Member
  • Offline
  • From: UK
  • Registered: 2017-12-30
  • Posts: 40

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

@ ilankrt

Hi, yes replaced BSS folder with original Sound 3D.

When I updated to a330 v2.2r3 I did not install the BSS package at all.

When I start X plane (with the A330), ALL sounds can be heard. However, at some point either on the ground or during flight, the sounds disappear. No engines, no first officer, no switch "clicks", no altitude call outs when landing, no "retard" etc.

The only sound I am left with is wind noise. I have removed every plugin possible but the problem is still there. I have also changed the location of the X Plane folder (It was on desktop but is now C:\X-Plane 11).

Attached another log. Sound went when entering data into mcdu. Then I shut down X Plane.

I am still curious about the line "E/FMOD: C:\jenkins\design-triggered\source_code\engine\sound\soun_fmod.cpp(172): FMOD error 51 - Error initializing output device."

It appears in some of the log files.

Kind regards

Post's attachments

Attachment icon Log.txt 64.48 kb, 614 downloads since 2018-01-31 

Intel i7-7700 @3.6GHz, GTX 1060 6Gb, 16Gb RAM. Saitek Pro yoke and 2nd quadrant, Saitek Multi panel, TM rudder.
X Plane 11.31, Jar A330, BSS sound pack, X LIfe, FM Car, ATC Chatter, XEnviro, Better pushback

160 Reply by enrigolan79

  • enrigolan79
  • enrigolan79
  • Member
  • Offline
  • From: La Rochelle
  • Registered: 2017-01-11
  • Posts: 86

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

satch10 wrote:

@ ilankrt

Hi, yes replaced BSS folder with original Sound 3D.

When I updated to a330 v2.2r3 I did not install the BSS package at all.

When I start X plane (with the A330), ALL sounds can be heard. However, at some point either on the ground or during flight, the sounds disappear. No engines, no first officer, no switch "clicks", no altitude call outs when landing, no "retard" etc.

The only sound I am left with is wind noise. I have removed every plugin possible but the problem is still there. I have also changed the location of the X Plane folder (It was on desktop but is now C:\X-Plane 11).

Attached another log. Sound went when entering data into mcdu. Then I shut down X Plane.

I am still curious about the line "E/FMOD: C:\jenkins\design-triggered\source_code\engine\sound\soun_fmod.cpp(172): FMOD error 51 - Error initializing output device."

It appears in some of the log files.

Kind regards

Have you already try another airport instead EGKK ?

Win7x64/Sp1 - i7-6700k@4.2GHz - 32Go ddr3 - LCD : 19"(1280x1024)+32"(1920x1080)+19"(1280x1024)
Geforce GTX 1060 6Go - Saitek Proflight yoke and rudders - XP11.20r3
A320neoJDv3.2r1 & BSS PW1000 v4.0 sound pack - A330JDv3.0r4 & BBS PW1000v2.02 sound pack
GHdeluxe FMcar2.6r1  X-Lifedeluxe2.2r2  X-ATCchatter v1.5.3   LittleNavMap   xEnviro1.07

161 Reply by satch10

  • satch10
  • Member
  • Offline
  • From: UK
  • Registered: 2017-12-30
  • Posts: 40

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

@ enrigollan79

Hi, Yes I have tried EHAM and others. X Plane always loads EGKK first even if it is not my departure airport. Is that correct?

Intel i7-7700 @3.6GHz, GTX 1060 6Gb, 16Gb RAM. Saitek Pro yoke and 2nd quadrant, Saitek Multi panel, TM rudder.
X Plane 11.31, Jar A330, BSS sound pack, X LIfe, FM Car, ATC Chatter, XEnviro, Better pushback

162 Reply by ilankrt

  • ilankrt
  • Member
  • Offline
  • Registered: 2015-10-20
  • Posts: 774

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

satch10@

Are you using Steam?

It seems to have something to do with:
https://steamcommunity.com/app/235800/d … 404087177/

X-Plane 11.30r3 | iMac27 OSX Mojave 14.10.4, | Samsung ultra-wide screen 49-inch | Saitek equipment | MFG pedals |Gladiator Joystick | Plugins: GndHandling, RWC, SMP, SoundM, X-Life, BetterPushback, AutoGate, SoundMaxx, X-ATC-chatter, X-Camera | iPad 12.9, iPad Air 9.7  | Airliner: JAR A320/A330, FF A350XWB, FF B767, SSG B747-8 inter, Epic1000 new, TBM900  http://ilankrt1.blogspot.co.il

163 Reply by satch10

  • satch10
  • Member
  • Offline
  • From: UK
  • Registered: 2017-12-30
  • Posts: 40

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

@ilankrt

No....not using Steam

Intel i7-7700 @3.6GHz, GTX 1060 6Gb, 16Gb RAM. Saitek Pro yoke and 2nd quadrant, Saitek Multi panel, TM rudder.
X Plane 11.31, Jar A330, BSS sound pack, X LIfe, FM Car, ATC Chatter, XEnviro, Better pushback

164 Reply by enrigolan79 (edited by enrigolan79 2018-02-01 09:30:11)

  • enrigolan79
  • enrigolan79
  • Member
  • Offline
  • From: La Rochelle
  • Registered: 2017-01-11
  • Posts: 86

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

satch10 wrote:

@ enrigollan79

Hi, Yes I have tried EHAM and others. X Plane always loads EGKK first even if it is not my departure airport. Is that correct?

No it's not correct, you can choose your departure airport in the main xplane 11 menu, select "new flight"...

If you don't have main menu at xp11 start-up, go to settings menu and click on "show main menu at sim launch"
;-)

Post's attachments

Attachment icon _2.png 400.46 kb, 176 downloads since 2018-02-01 

Attachment icon _3.png 1.17 mb, 159 downloads since 2018-01-31 

Win7x64/Sp1 - i7-6700k@4.2GHz - 32Go ddr3 - LCD : 19"(1280x1024)+32"(1920x1080)+19"(1280x1024)
Geforce GTX 1060 6Go - Saitek Proflight yoke and rudders - XP11.20r3
A320neoJDv3.2r1 & BSS PW1000 v4.0 sound pack - A330JDv3.0r4 & BBS PW1000v2.02 sound pack
GHdeluxe FMcar2.6r1  X-Lifedeluxe2.2r2  X-ATCchatter v1.5.3   LittleNavMap   xEnviro1.07

165 Reply by satch10

  • satch10
  • Member
  • Offline
  • From: UK
  • Registered: 2017-12-30
  • Posts: 40

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

@enrigolan79

Thanks again for your time. Yes, from the main flight menu I choose the plane, the departure airport (e.g. EHAM) and the weather and time.

So I am at EHAM. But the log shows that EGKK was loaded first. Always....no matter where my departure airport is set.

I contacted JAR about the sound problem. He could not find an explanation.

I think that I have found it!

I am mid flight at the moment.....no sound problem. Will update later.

Intel i7-7700 @3.6GHz, GTX 1060 6Gb, 16Gb RAM. Saitek Pro yoke and 2nd quadrant, Saitek Multi panel, TM rudder.
X Plane 11.31, Jar A330, BSS sound pack, X LIfe, FM Car, ATC Chatter, XEnviro, Better pushback

166 Reply by satch10

  • satch10
  • Member
  • Offline
  • From: UK
  • Registered: 2017-12-30
  • Posts: 40

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

@ enrigolan79 and ilankrt

Flight completed........no sound problems at all. I even got a round of applause from the passengers and "Nice landing sir" from the FO.

The problem was my external audio interface. Something was obviously causing some sound to be lost on the ground or in flight.
Maybe something to do with ASIO drivers.

The "good" flight was done with headphones plugged directly into the PC headphone socket.

Thank you very much for your time and efforts to help.

Kind Regards

Intel i7-7700 @3.6GHz, GTX 1060 6Gb, 16Gb RAM. Saitek Pro yoke and 2nd quadrant, Saitek Multi panel, TM rudder.
X Plane 11.31, Jar A330, BSS sound pack, X LIfe, FM Car, ATC Chatter, XEnviro, Better pushback

167 Reply by jcdp (edited by jcdp 2018-02-01 12:03:49)

  • jcdp
  • Member
  • Offline
  • Registered: 2016-03-08
  • Posts: 380

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

satch10 wrote:

@ enrigollan79

Hi, Yes I have tried EHAM and others. X Plane always loads EGKK first even if it is not my departure airport. Is that correct?

Hi

If you noticed that from log.txt file  it is correct .
When you install a new scenery in "custom scenery" folder usually you delete the scenery_pack.ini file .This file is rebuilt when you restart X-plane whith alphabetical order .
That the reason why EGKK is loaded before EHAM .

jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

168 Reply by satch10

  • satch10
  • Member
  • Offline
  • From: UK
  • Registered: 2017-12-30
  • Posts: 40

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

@jcdp

Thank you. If I load new airport scenery I usually edit the ini file and make sure that the new airport is somewhere in the list above Global Airports. I thought I had seen it done like that on youtube.

If I delete the file and it rebuilds in alphabetical order will X Plane initially load whatever airport is first alphabetically and then load my selected departure airport. ( Of course, if I select EHAM that is where I am when X Plane has loaded. I don't find myself at EGKK first.  It is just the log.txt says it loaded EGKK (or first alphabetically if that is how the ini file is structured).

Intel i7-7700 @3.6GHz, GTX 1060 6Gb, 16Gb RAM. Saitek Pro yoke and 2nd quadrant, Saitek Multi panel, TM rudder.
X Plane 11.31, Jar A330, BSS sound pack, X LIfe, FM Car, ATC Chatter, XEnviro, Better pushback

169 Reply by enrigolan79

  • enrigolan79
  • enrigolan79
  • Member
  • Offline
  • From: La Rochelle
  • Registered: 2017-01-11
  • Posts: 86

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

satch10 wrote:

@ enrigolan79 and ilankrt

Flight completed........no sound problems at all. I even got a round of applause from the passengers and "Nice landing sir" from the FO.

The problem was my external audio interface. Something was obviously causing some sound to be lost on the ground or in flight.
Maybe something to do with ASIO drivers.

The "good" flight was done with headphones plugged directly into the PC headphone socket.

Thank you very much for your time and efforts to help.

Kind Regards

Very good news  ;-))))
Now you can re-put bss sound pack...

Happy flight

Win7x64/Sp1 - i7-6700k@4.2GHz - 32Go ddr3 - LCD : 19"(1280x1024)+32"(1920x1080)+19"(1280x1024)
Geforce GTX 1060 6Go - Saitek Proflight yoke and rudders - XP11.20r3
A320neoJDv3.2r1 & BSS PW1000 v4.0 sound pack - A330JDv3.0r4 & BBS PW1000v2.02 sound pack
GHdeluxe FMcar2.6r1  X-Lifedeluxe2.2r2  X-ATCchatter v1.5.3   LittleNavMap   xEnviro1.07

170 Reply by satch10

  • satch10
  • Member
  • Offline
  • From: UK
  • Registered: 2017-12-30
  • Posts: 40

Re: JD330 Airliner ver 2.2 RC1, R2, R3 WIN/MAC 64 bit (X-Plane 11)

@ enrigolan79

Now you can re-put bss sound pack...

Yes and the rest of my plugins smile

Thank you again

Kind regards

Intel i7-7700 @3.6GHz, GTX 1060 6Gb, 16Gb RAM. Saitek Pro yoke and 2nd quadrant, Saitek Multi panel, TM rudder.
X Plane 11.31, Jar A330, BSS sound pack, X LIfe, FM Car, ATC Chatter, XEnviro, Better pushback