[ Closed ] v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS) (Page 12 of 19)

**enrigolan79** · 2017-02-07 14:37:23

enrigolan79
Member
Offline

From: La Rochelle
Registered: 2017-01-11
Posts: 86

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Thank Eugeny for this new version 2.0b5
Will try soon

Win7x64/Sp1 - i7-6700k@4.2GHz - 32Go ddr3 - LCD : 19"(1280x1024)+32"(1920x1080)+19"(1280x1024)
Geforce GTX 1060 6Go - Saitek Proflight yoke and rudders - XP11.20r3
A320neoJDv3.2r1 & BSS PW1000 v4.0 sound pack - A330JDv3.0r4 & BBS PW1000v2.02 sound pack
GHdeluxe FMcar2.6r1 X-Lifedeluxe2.2r2 X-ATCchatter v1.5.3 LittleNavMap xEnviro1.07

**colinah** · 2017-02-07 14:48:36

colinah
Member
Offline

Registered: 2015-04-22
Posts: 138

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Just tried b5, found a couple of issues. On takeoff not getting the instruction to reduce to climb power and AP not managing speed. It just holds at 250 knts even though it was above 10000 ft.
I will reload it and try again.

**pic** · 2017-02-07 15:03:05

pic
Member
Offline

From: Tardis, somewhere in time,Univ
Registered: 2015-04-14
Posts: 129

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

J.A.Romanov wrote:

Ok, thanks for comments!
a330 beta 5 is out:
+ APU fuel cons. fixed
+ Tow crash fixed
+ COM radio freq tuning fixed
+ cockpit light fixed
+ minor bugs fixed
As we expect, the correct engines work will be broken with next XP11 beta, cause of Laminars want rework some inside XP11 code. So, will see and fix if need

Thanks Eugeny! Gonna make some time to test this one out
OK, now I need to RANT!
............when new people come to the forum, some people that have been here for awhile (even less than me!) really pounce on these poor fellows looking for help in order to HELP US! It is very disconcerting as well as RUDE, and I don't blame anyone for getting hot under the collar when some idiot thinks he is king of the hill. The only King here is Eugeny and his crew.
We are all equal, no one else is the BOSS. Treat people the way YOU want to be treated. I did not see any disrespect from one of the posters here, but some idiot needs to pounce on the poor kid. Not naming names and will not be entertaining any more convo on this.
THIS HAS TO STOP!!!!!!
Rude people not only chase others away, but make all of us look bad. And that in turn would make a potential customer say byebye, I'll buy elsewhere.
It's time the very few people here get their act together and treat people like you want to be treated. LET'S ALL BE HELPFUL, NOT HARMFUL
++++++END OF RANT+++++++ ++++++++++++++ END OF CONVERSATION

“The universe is big. It’s vast, complicated and ridiculous. And sometimes, very rarely, impossible things just happen and we call them miracles.”The Doctor
Win7Pro64/i76700k 4.6/GTX 1080ti STRIX oc/32gbCorsairVengeance DD4Ram3000/ASUS Z170Deluxe

**vschwarz504** · 2017-02-07 22:08:32

vschwarz504
Member
Offline

Registered: 2016-04-22
Posts: 11

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Thank you for your update, hope, that laminar will develop xp11 so far, that you doesn^t work behind them :-)
Your aircraft isn`t the only type who have some problems on xp11 at the moment. But my last flight with a330 went without important bugs. only the replay issue came back.( engines went to full power after stopping the replay mode)

I will test beta 5 soon.

thank you and
regards
Volker

**Sloboda** · 2017-02-08 01:06:50

Sloboda
Member
Offline

From: Fécamp, France
Registered: 2015-10-04
Posts: 233

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Hello Eugeny,
that's new ?
I have the plan on the map but IRS not aligned.
is it normal ?

VOICECOMMANDER CREATOR. Free and PRO profiles available on https://xplane.amisinformatique.com/

Windows 10 64bits – 6 coeurs I7 4,5 GHz - SSD – 32Go RAM – nVidia GTX Titan X 12Go – X-Plane 11 - A320 Neo Jardesign – A330 Jardesign - A350 FF - B777 FF - B767 FF - B757 V2 FF - Rotate MD80 - B737 IXEG - GH Deluxe - FollowMe - X-Life Deluxe

**J.A.Romanov** · 2017-02-08 11:37:19

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Sloboda wrote:

Hello Eugeny,
that's new ?
I have the plan on the map but IRS not aligned.
is it normal ?

This not normal for real AB, but this is model simplification.

Please read a FAQ before you post a bug http://support.jardesign.org

**hdespres** · 2017-02-08 13:43:46

hdespres
Member
Offline

Registered: 2015-12-02
Posts: 73

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

colinah wrote:

Just tried b5, found a couple of issues. On takeoff not getting the instruction to reduce to climb power and AP not managing speed. It just holds at 250 knts even though it was above 10000 ft.
I will reload it and try again.

I've tried beta 5 with the exact same results. No instruction to reduce to climb power and auto throttle not working properly. Also noted that my climb rate was above 4000 fpm until it reached FL400 at a speed of 250 knots. Aborted flight and went back to beta 4.

Thanks for the update.

i5 8600K OC@ 5.0Ghz, 16 GB DDR4-RAM
ASUS ROG STRIX GTX 1070 - X55 Saitek Pro Rhino Stick, X55 Saitek Rhino Throttle
Windows 10 64 Bit - X-plane 11.11 - X-Enviro 1.07 - X-Ivap - XCamera - GHD - EFASS NG

**J.A.Romanov** · 2017-02-08 18:50:34

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

hdespres wrote:

colinah wrote:
Just tried b5, found a couple of issues. On takeoff not getting the instruction to reduce to climb power and AP not managing speed. It just holds at 250 knts even though it was above 10000 ft.
I will reload it and try again.
I've tried beta 5 with the exact same results. No instruction to reduce to climb power and auto throttle not working properly. Also noted that my climb rate was above 4000 fpm until it reached FL400 at a speed of 250 knots. Aborted flight and went back to beta 4.
Thanks for the update.

Ohhhh! You are right, but i am stupid. Sure, this work wrong with beta 5, sorry. Rebuild and post beta 6 cause of this.

+ SPEED mode unstable fixed
+ LVR CLB flash fixed
+ vertical profile improved

Please read a FAQ before you post a bug http://support.jardesign.org

**hdespres** · 2017-02-08 20:06:53

hdespres
Member
Offline

Registered: 2015-12-02
Posts: 73

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Thank You Mr. Romanov. Looking forward to trying this out again.

Hervé

i5 8600K OC@ 5.0Ghz, 16 GB DDR4-RAM
ASUS ROG STRIX GTX 1070 - X55 Saitek Pro Rhino Stick, X55 Saitek Rhino Throttle
Windows 10 64 Bit - X-plane 11.11 - X-Enviro 1.07 - X-Ivap - XCamera - GHD - EFASS NG

**Sloboda** · 2017-02-09 07:13:49

Sloboda
Member
Offline

From: Fécamp, France
Registered: 2015-10-04
Posts: 233

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

It ask me to contact support for bug SASL just after i type DIKOL and paste it on LFPO.

Post's attachments

Desktop 02.09.2017 - 08.11.07.04.jpg 589.03 kb, 150 downloads since 2017-02-09

Log.txt 1.45 mb, 168 downloads since 2017-02-09

VOICECOMMANDER CREATOR. Free and PRO profiles available on https://xplane.amisinformatique.com/

Windows 10 64bits – 6 coeurs I7 4,5 GHz - SSD – 32Go RAM – nVidia GTX Titan X 12Go – X-Plane 11 - A320 Neo Jardesign – A330 Jardesign - A350 FF - B777 FF - B767 FF - B757 V2 FF - Rotate MD80 - B737 IXEG - GH Deluxe - FollowMe - X-Life Deluxe

**hdespres** · 2017-02-09 12:04:45

hdespres
Member
Offline

Registered: 2015-12-02
Posts: 73

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

CYUL/CYYZ flight went as it should reference previous troubles. Thank You. Short video is included... as I have a "HYD ELEC PUMP" warning on center ecam. This was also seen on beta 4. This was intermitent and mostly on approach phase.
Short Youtube video link also included here... problem is seen at 2:10 mins on video. I have no failures set up.
https://youtu.be/YHhs7rZ1XOE
Cheers

Post's attachments

Log.txt 77.89 kb, 257 downloads since 2017-02-08

i5 8600K OC@ 5.0Ghz, 16 GB DDR4-RAM
ASUS ROG STRIX GTX 1070 - X55 Saitek Pro Rhino Stick, X55 Saitek Rhino Throttle
Windows 10 64 Bit - X-plane 11.11 - X-Enviro 1.07 - X-Ivap - XCamera - GHD - EFASS NG

**bawbag** · 2017-02-10 23:04:19

bawbag
Member
Offline

From: Scotland
Registered: 2017-02-04
Posts: 6

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

I can confirm Speed mode working well even in bad weather were it used to surge up and down. I do get HYD ELEC PUMP warning but only on approach intermittently.

Thanks

i5 4670K @ 4.6Ghz, 16GB Crucial Ballistix Sport VLP, ASUS GTX 760, H80i Cooler & 3 SSD's

**Sloboda** · 2017-02-11 10:50:29

Sloboda
Member
Offline

From: Fécamp, France
Registered: 2015-10-04
Posts: 233

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Hello Eugeny,
since v2b, a330 not place correctly at autogate.
It always enter in buildings.
Thanks

VOICECOMMANDER CREATOR. Free and PRO profiles available on https://xplane.amisinformatique.com/

Windows 10 64bits – 6 coeurs I7 4,5 GHz - SSD – 32Go RAM – nVidia GTX Titan X 12Go – X-Plane 11 - A320 Neo Jardesign – A330 Jardesign - A350 FF - B777 FF - B767 FF - B757 V2 FF - Rotate MD80 - B737 IXEG - GH Deluxe - FollowMe - X-Life Deluxe

**m.kunz0108** · 2017-02-11 13:52:38

m.kunz0108
New member
Offline

Registered: 2017-02-11
Posts: 1

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Hello Guys,

I´ve two problems:
First problem: I´m on the ground and the PFD shows me a altitude of -8800ft.
Second problem: When I give a little bit thrust, the PFD shows me after 5 seconds 300knt+ indicated and I´m very fast airborne - not flyable. The Secondary Flight display shows me the correctly ground speed.

My system:
Mac OS X 10.12.3
A330 V2.0b6 - X-Plane 11 pb10
Saitek X52

Greets Max

Post's attachments

a330_5.png 3.89 mb, 180 downloads since 2017-02-11

X-Plane 10&11 @ iMac 27" (late 2013) Intel i7 4771 @ 3,5Ghz (Turbo-Boost 3,9Ghz); Nvidia Geforce GTX780M 4Gb VRAM; 24Gb DDR3 RAM; 1TB Fusion Drive / Saitek X52 & CH Yoke // A320&A330 by JarDesign / B757,767,777 by Flightfactor/ IXEG B737-300/ B747-8,Embraer 190LR by SSG / CRJ200 by JRollen / PC12, CT206H, PA34 Seneca II by Carenado // Navigraph Ultimate Subscription // Vatsim ATCo & Pilot(1000h+)

**jcdp** · 2017-02-11 21:23:21

jcdp
Member
Offline

Registered: 2016-03-08
Posts: 380

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Hi Eugeny

Just as information:

With Windows 10 and

X-Plane v11 b9 and A330 v2.05 everything worked fine ...

X-Plane v11 b10 and A330 v2.05 it becomes impossible to adjust QNH with the knob ...(no effect)

X-Plane v11 b10 and A330 v2.06 no possible QNH adjustment (this means also no possibility to talk with X-life ATC ) and , surprise : a "nice" pink color around the winscreen ...
Also A330 has desappeared in pluggins menu ...so it is not possible to close the doors ...

As I have just downloaded and XP b10 and A330 v2.06 at the same time I cannot tell where problems are from ...

Here is log.txt for last try .

Regards

Post's attachments

Log.zip 34.98 kb, 103 downloads since 2017-02-11

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

**jcdp** · 2017-02-11 22:22:47

jcdp
Member
Offline

Registered: 2016-03-08
Posts: 380

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

jcdp wrote:

Hi Eugeny
Just as information:
With Windows 10 and
X-Plane v11 b9 and A330 v2.05 everything worked fine ...
X-Plane v11 b10 and A330 v2.05 it becomes impossible to adjust QNH with the knob ...(no effect)
X-Plane v11 b10 and A330 v2.06 no possible QNH adjustment (this means also no possibility to talk with X-life ATC ) and , surprise : a "nice" pink color around the winscreen ...
Also A330 has desappeared in pluggins menu ...so it is not possible to close the doors ...
As I have just downloaded and XP b10 and A330 v2.06 at the same time I cannot tell where problems are from ...
Here is log.txt for last try .
Regards

Hi again

After many starts of X-Plane 11 b10 I confirm knobs don't work (QNH , speed, flight level ...
so no possibility to fly ...

(The "nice" pink color seems to have desappeared definitively )

No A330 in pluggins menu ... so doors remain open ...

Post's attachments

Log.zip 34.3 kb, 330 downloads since 2017-02-11

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

**hdespres** · 2017-02-11 22:24:41

hdespres
Member
Offline

Registered: 2015-12-02
Posts: 73

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Strange you are having these problem. In flight now and no issue so far... will update this post when flight complete.

Flight went well... no problems other that the star... aircraft turn wrong way... but we recovered and landed into CYHZ... Love the new scenery there. Cheers

i5 8600K OC@ 5.0Ghz, 16 GB DDR4-RAM
ASUS ROG STRIX GTX 1070 - X55 Saitek Pro Rhino Stick, X55 Saitek Rhino Throttle
Windows 10 64 Bit - X-plane 11.11 - X-Enviro 1.07 - X-Ivap - XCamera - GHD - EFASS NG

**ilankrt** · 2017-02-11 23:15:02

ilankrt
Member
Offline

Registered: 2015-10-20
Posts: 774

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

m.kunz0108 wrote:

Hello Guys,
I´ve two problems:
First problem: I´m on the ground and the PFD shows me a altitude of -8800ft.
Second problem: When I give a little bit thrust, the PFD shows me after 5 seconds 300knt+ indicated and I´m very fast airborne - not flyable. The Secondary Flight display shows me the correctly ground speed.
My system:
Mac OS X 10.12.3
A330 V2.0b6 - X-Plane 11 pb10
Saitek X52
Greets Max

To your first problem: I think that your QNH was wrong? (see if airport altitude is the same as on PFD...)
Second problem: maybe you have to calibrate your thrust levers (Saitek?) probably they went to TOGA .. Weird...

**jkpilot** · 2017-02-11 23:24:16

jkpilot
New member
Offline

Registered: 2017-02-11
Posts: 1

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

sorry if this was already answered or not. during cruise flight FL380 the aircraft surges +/- 200fpm, it never stays level. Is this a bug in the plane or xp11? Other A/C I have dont do this. I can live with it but its annoying hearing the engines rev up and down the entire flight. Thx

**J.A.Romanov** · 2017-02-12 07:29:10

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

jcdp wrote:

jcdp wrote:
Hi Eugeny
Just as information:
With Windows 10 and
X-Plane v11 b9 and A330 v2.05 everything worked fine ...
X-Plane v11 b10 and A330 v2.05 it becomes impossible to adjust QNH with the knob ...(no effect)
X-Plane v11 b10 and A330 v2.06 no possible QNH adjustment (this means also no possibility to talk with X-life ATC ) and , surprise : a "nice" pink color around the winscreen ...
Also A330 has desappeared in pluggins menu ...so it is not possible to close the doors ...
As I have just downloaded and XP b10 and A330 v2.06 at the same time I cannot tell where problems are from ...
Here is log.txt for last try .
Regards

Hi again
After many starts of X-Plane 11 b10 I confirm knobs don't work (QNH , speed, flight level ...
so no possibility to fly ...
(The "nice" pink color seems to have desappeared definitively )
No A330 in pluggins menu ... so doors remain open ...

From your log:

Fetching plugins for D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins

D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/330/win.xpl : Error Code = 1114 : Une routine díinitialisation díune bibliothËque de liens dynamiques (DLL) a ÈchouÈ.
D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/diagnost/win.xpl : Error Code = 1114 : Une routine díinitialisation díune bibliothËque de liens dynamiques (DLL) a ÈchouÈ.
[SASL] Starting...
X-Plane scriptable avionics library plugin snapshot 2.4.22 20170206 Commercial Edition
Loaded: D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/sasl/64/win.xpl (1-sim.sasl).

D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/sound1d/win.xpl : Error Code = 1114 : Une routine díinitialisation díune bibliothËque de liens dynamiques (DLL) a ÈchouÈ.
D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/sound2d/win.xpl : Error Code = 1114 : Une routine díinitialisation díune bibliothËque de liens dynamiques (DLL) a ÈchouÈ.
D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/sound3d/win.xpl : Error Code = 1114 : Une routine díinitialisation díune bibliothËque de liens dynamiques (DLL) a ÈchouÈ.
[SASL] Path to panel: D:\Desktop\X-Plane 11\Aircraft\Aircrafts\330_JARDesign\aircraft.key

You can open youtube and search like "windows 10 error 1114" to read about solution. The problem is wrong power settings for videocard.

Please read a FAQ before you post a bug http://support.jardesign.org

**jcdp** · 2017-02-12 08:56:13

jcdp
Member
Offline

Registered: 2016-03-08
Posts: 380

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

J.A.Romanov wrote:

jcdp wrote:
jcdp wrote:
Hi Eugeny
Just as information:
With Windows 10 and
X-Plane v11 b9 and A330 v2.05 everything worked fine ...
X-Plane v11 b10 and A330 v2.05 it becomes impossible to adjust QNH with the knob ...(no effect)
X-Plane v11 b10 and A330 v2.06 no possible QNH adjustment (this means also no possibility to talk with X-life ATC ) and , surprise : a "nice" pink color around the winscreen ...
Also A330 has desappeared in pluggins menu ...so it is not possible to close the doors ...
As I have just downloaded and XP b10 and A330 v2.06 at the same time I cannot tell where problems are from ...
Here is log.txt for last try .
Regards

Hi again
After many starts of X-Plane 11 b10 I confirm knobs don't work (QNH , speed, flight level ...
so no possibility to fly ...
(The "nice" pink color seems to have desappeared definitively )
No A330 in pluggins menu ... so doors remain open ...

From your log:
Fetching plugins for D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins
D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/330/win.xpl : Error Code = 1114 : Une routine díinitialisation díune bibliothËque de liens dynamiques (DLL) a ÈchouÈ.
D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/diagnost/win.xpl : Error Code = 1114 : Une routine díinitialisation díune bibliothËque de liens dynamiques (DLL) a ÈchouÈ.
[SASL] Starting...
X-Plane scriptable avionics library plugin snapshot 2.4.22 20170206 Commercial Edition
Loaded: D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/sasl/64/win.xpl (1-sim.sasl).
D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/sound1d/win.xpl : Error Code = 1114 : Une routine díinitialisation díune bibliothËque de liens dynamiques (DLL) a ÈchouÈ.
D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/sound2d/win.xpl : Error Code = 1114 : Une routine díinitialisation díune bibliothËque de liens dynamiques (DLL) a ÈchouÈ.
D:\Desktop/X-Plane 11/Aircraft/Aircrafts/330_JARDesign/plugins/sound3d/win.xpl : Error Code = 1114 : Une routine díinitialisation díune bibliothËque de liens dynamiques (DLL) a ÈchouÈ.
[SASL] Path to panel: D:\Desktop\X-Plane 11\Aircraft\Aircrafts\330_JARDesign\aircraft.key
You can open youtube and search like "windows 10 error 1114" to read about solution. The problem is wrong power settings for videocard.

Hi Eugeny

Thanks for your quick answer .
I am a bit surprised but I am going to investigate according to your suggestion ...
Regards
jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

**J.A.Romanov** · 2017-02-12 09:59:17

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

As i see automatic rollout is not stable now, cause some was changed in XP11. So, i work on it and this will be fixed with next a330 beta.

Please read a FAQ before you post a bug http://support.jardesign.org

**jcdp** · 2017-02-12 10:49:31

jcdp
Member
Offline

Registered: 2016-03-08
Posts: 380

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Hi Eugeny

Following post 296 ...

I found info about error 1114 on internet (web is confusing ...) but in the meantime I have downloaded a new XP 11 beta ...
and ...
A330 works fine again ...(A330 is back in plugins menu, knobs operational ...)

I noticed that "burnt gases" behind reactors have desappeared ...

Thanks for help
Regards

jcdp

I7 5930k @ 3,5Ghz , 32 Go Ram, NVidia 970 4Go , W10 64 bits, SSD 500Go , HD 3To
Moniteur Acer K242HQK (3840x2160)
CH Products : Flight Sim Yoke , Pro pedals
X-plane 11.41r2

**siege00** · 2017-02-13 03:38:26

siege00
New member
Offline

Registered: 2017-02-13
Posts: 2

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Good evening and thank you for such a great product and access to the beta. I haven't read through all of the pages of comments but wanted to post my observations.

I just flew an afternoon to evening flight from KCOS to KLAX and observed the following:
1. Flt Plan does not automatically scroll when passing waypoints. This may be by design.
2. I could not enter heading mode while on the ground for preflight. While airborne I was able to select heading mode.
3. Heading bug on ND did not render while in managed mode to allow for pre-selecting a heading before selecting heading mode.
4. Decelerate did not indicate on the PFD when passing T/D. (it's possible that I may have missed it by looking in the wrong place)
5. In descent phase, the CAB PRESS page of the ECAM did not render correctly. No needles were shown on the digital gauges.
6. At night, the ECAM page select buttons were not illuminated with the rest of the panels. (Did I miss a knob?)
7. Constraints did not print on the ND when selected. Not sure if this is planned for/implemented or not.
8. Altimeter wouldn't display 30.08. It displayed 30.09 twice however, Example: 30.07 -> 30.09 -> 30.09 -> 30.10. Maybe a conversion issue from hPA to inHG.

The plane flew a great VNAV profile and AUTOLAND worked like a charm except for the rollout, which I saw the comment above.

Thanks again! I have to say that I love this plane!

Edited to attach log.zip

Post's attachments

Log.zip 23.75 kb, 121 downloads since 2017-02-12

**Javier_Aldaz** · 2017-02-13 18:47:29

Javier_Aldaz
New member
Offline

Registered: 2017-01-21
Posts: 4

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Hello everyone,

Just a question. This update is only for X-Plane 11?. Or can I update my A330 on X-Plane 10 with it as well?

Thank you in advance

Javier

[ Closed ] v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS) (Page 12 of 19)

Posts: 276 to 300 of 453

276 Reply by enrigolan79 2017-02-07 14:37:23

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

277 Reply by colinah 2017-02-07 14:48:36

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

278 Reply by pic 2017-02-07 15:03:05

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

279 Reply by vschwarz504 2017-02-07 22:08:32

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

280 Reply by Sloboda 2017-02-08 01:06:50 (edited by Sloboda 2017-02-08 01:08:58)

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

281 Reply by J.A.Romanov 2017-02-08 11:37:19

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

282 Reply by hdespres 2017-02-08 13:43:46

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

283 Reply by J.A.Romanov 2017-02-08 18:50:34

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

284 Reply by hdespres 2017-02-08 20:06:53

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

285 Reply by Sloboda 2017-02-09 07:13:49 (edited by Sloboda 2017-02-09 07:15:40)

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

286 Reply by hdespres 2017-02-09 12:04:45 (edited by hdespres 2017-02-09 12:23:40)

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

287 Reply by bawbag 2017-02-10 23:04:19

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

288 Reply by Sloboda 2017-02-11 10:50:29

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

289 Reply by m.kunz0108 2017-02-11 13:52:38

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

290 Reply by jcdp 2017-02-11 21:23:21

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

291 Reply by jcdp 2017-02-11 22:22:47

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

292 Reply by hdespres 2017-02-11 22:24:41 (edited by hdespres 2017-02-12 00:59:20)

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

293 Reply by ilankrt 2017-02-11 23:15:02

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

294 Reply by jkpilot 2017-02-11 23:24:16

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

295 Reply by J.A.Romanov 2017-02-12 07:29:10

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

296 Reply by jcdp 2017-02-12 08:56:13

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

297 Reply by J.A.Romanov 2017-02-12 09:59:17

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

298 Reply by jcdp 2017-02-12 10:49:31

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

299 Reply by siege00 2017-02-13 03:38:26 (edited by siege00 2017-02-13 03:40:27)

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

300 Reply by Javier_Aldaz 2017-02-13 18:47:29

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Posts: 276 to 300 of 453