26 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

pic wrote:
J.A.Romanov wrote:

Thanks all your comments and reports! We wait next XP11 beta to test our beta-2. Hope (and test this with developers version) we will see some bug-fix inside simulator.

Hi Eugene, Trying to activate..sent a ticket
Thanks a ton!
Luigi

Luigi, Done, please use.

Please read a FAQ before you post a bug http://support.jardesign.org

27 Reply by pic

  • pic
  • pic
  • Member
  • Offline
  • From: Tardis, somewhere in time,Univ
  • Registered: 2015-04-14
  • Posts: 129

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Got it! Thank you.......Now, I put it into xp11.3, was able to do a complete fms input flight, perfs..then before taking off, I changed the 330 settings for no fps message, then re-opened 33o settings and sim froze, ctd.  I noticed another thing. After entering serial number then reg Ground plug, the sim froze and then I had to force a ctd. Anyway, for the first item, I attached my log, bb

J.A.Romanov wrote:
pic wrote:
J.A.Romanov wrote:

Thanks all your comments and reports! We wait next XP11 beta to test our beta-2. Hope (and test this with developers version) we will see some bug-fix inside simulator.

Hi Eugene, Trying to activate..sent a ticket
Thanks a ton!
Luigi

Luigi, Done, please use.

Post's attachments

Attachment icon bbox_log.txt 4.44 kb, 304 downloads since 2016-12-21 

Attachment icon Log.txt 86.59 kb, 358 downloads since 2016-12-21 

“The universe is big. It’s vast, complicated and ridiculous. And sometimes, very rarely, impossible things just happen and we call them miracles.”The Doctor
Win7Pro64/i76700k 4.6/GTX 1080ti STRIX oc/32gbCorsairVengeance DD4Ram3000/ASUS Z170Deluxe

28 Reply by pic

  • pic
  • pic
  • Member
  • Offline
  • From: Tardis, somewhere in time,Univ
  • Registered: 2015-04-14
  • Posts: 129

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Got the 330 flying, but right after takeoff and getting prepared to climb out, went to single frame/maybe 10-12 after.  Tried taking out smp, head shake to no avail. Then took out goflight plug, after putting back in, ctd.
FMS works great, plane looks and sounds super..just gotta iron out these few bugs and we are set!  Files attached

Post's attachments

Attachment icon bbox_log.txt 56.34 kb, 338 downloads since 2016-12-21 

Attachment icon Log.txt 48.74 kb, 472 downloads since 2016-12-21 

“The universe is big. It’s vast, complicated and ridiculous. And sometimes, very rarely, impossible things just happen and we call them miracles.”The Doctor
Win7Pro64/i76700k 4.6/GTX 1080ti STRIX oc/32gbCorsairVengeance DD4Ram3000/ASUS Z170Deluxe

29 Reply by kebs

  • kebs
  • Member
  • Offline
  • From: Paris
  • Registered: 2015-09-05
  • Posts: 65

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Hello
impossible to activate
thanks for your job
Bon courage

30 Reply by judebrad

  • judebrad
  • Member
  • Offline
  • Registered: 2015-04-22
  • Posts: 23

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Framerate in XP-11 is bad regardless of aircraft used. They are still optimizing code at this stage.

31 Reply by pic

  • pic
  • pic
  • Member
  • Offline
  • From: Tardis, somewhere in time,Univ
  • Registered: 2015-04-14
  • Posts: 129

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

yea, that last xplane 11 update is killing frame rates!

“The universe is big. It’s vast, complicated and ridiculous. And sometimes, very rarely, impossible things just happen and we call them miracles.”The Doctor
Win7Pro64/i76700k 4.6/GTX 1080ti STRIX oc/32gbCorsairVengeance DD4Ram3000/ASUS Z170Deluxe

32 Reply by cyras

  • cyras
  • cyras
  • Member
  • Offline
  • From: Germany
  • Registered: 2015-05-24
  • Posts: 11

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Yes, It is the FMC that caused the Framerate drops. Is it possible to upload the Beta 2 for us, the users only need to change the x-plane.exe back to beta 2 and the problemes are gone wink

CPU: Intel I9-7920X 5GHz //MB: MSI X299 Gaming Pro Carbon // RAM: 32GB Corsair Dominator Platinum Limited 3200 //
Graka: Zotac 1080TI Artic Storm // Windows 10

cyras's Website

33 Reply by laohu314

  • laohu314
  • Member
  • Offline
  • Registered: 2016-01-03
  • Posts: 677

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

J.A.Romanov wrote:

So.. Just install XP11 pb3. No old my code, no my reworked code not work well with pb3. Reworked code work well now with pb2. With pb3 - not work. I dont know exactly what a reason, but seems like after passing next point, XPLMGetDestinationFMSEntry back me to prev point. Seems like when i set XPLMSetDestinationFMSEntry instant FMS not mark prev points as "passed". But this is my guess only. My fact - not work. So, XP11 is megabuggy now.

The main issue - instant FMS not work correct with actual waypoint. So, just report this to Ben and Phillip. Wait..


Confirmed. Just tried a flight with pb3 and it was a disaster. All went well until TO. Then the FMS went ape....  It flew right by the first WP, after a Direct it started flashing and FPS went down the drain...  Well, it's a beta. Let's hope pb4 is better!

iMac5K 27” (2015), i7 4GHz, OSX 10.14.6, 32GB, AMD M395X 4096MB, Saitek X52, TPM, Radio, Switch & Multi, TM MFD, XP11.35r1, FFA320v0.11.2-2305, ToLiSs A319 v1.3.3, JDA320 v3.4r1, JDA330 v3.2r1, XL v4_250719, FM v2.6r2,  GndHdg v.4.010719, Air Plugin v4.8.3,  FWL 2.7.19, 3jFPS-wizard, PI v2.73.06, NOAA v2.4.4, XSPs v2.75, XCL v1.37, BPB v0.47, SAM 1.1.0

34 Reply by Vasilis

  • Vasilis
  • Member
  • Offline
  • Registered: 2015-04-24
  • Posts: 8

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

I have found a bug in XPL 11 with Ground Handling 051216. If you reload an aircraft or if you change from an aircraft to an other the plugin menu shows twice or more depends on how many times you have reloaded.
.
http://prntscr.com/dml2ey

35 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Ok, good news! I just get developers version of XP11 beta from Laminars and.. a330 flying route well now. They are fixed some. So, we need wait next public beta to test next  a330 beta.

Please read a FAQ before you post a bug http://support.jardesign.org

36 Reply by hdespres

  • hdespres
  • hdespres
  • Member
  • Offline
  • Registered: 2015-12-02
  • Posts: 73

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Very well... Thank You.

i5 8600K OC@ 5.0Ghz, 16 GB DDR4-RAM
ASUS ROG STRIX GTX 1070 - X55 Saitek Pro Rhino Stick, X55 Saitek Rhino Throttle
Windows 10 64 Bit - X-plane 11.11 - X-Enviro 1.07 - X-Ivap - XCamera - GHD - EFASS NG

37 Reply by pic

  • pic
  • pic
  • Member
  • Offline
  • From: Tardis, somewhere in time,Univ
  • Registered: 2015-04-14
  • Posts: 129

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

GREAT! Looking forward to it smile

J.A.Romanov wrote:

Ok, good news! I just get developers version of XP11 beta from Laminars and.. a330 flying route well now. They are fixed some. So, we need wait next public beta to test next  a330 beta.

“The universe is big. It’s vast, complicated and ridiculous. And sometimes, very rarely, impossible things just happen and we call them miracles.”The Doctor
Win7Pro64/i76700k 4.6/GTX 1080ti STRIX oc/32gbCorsairVengeance DD4Ram3000/ASUS Z170Deluxe

38 Reply by j.w.muilwijk

  • j.w.muilwijk
  • Member
  • Offline
  • Registered: 2016-05-29
  • Posts: 8

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

is the new version 2.0 also going to work at xp10 or only xp11

39 Reply by IronCondor

  • IronCondor
  • Member
  • Offline
  • Registered: 2016-12-21
  • Posts: 8

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

This is excellent news! I have the a320neo. I am getting much better frame rates overall in xp11. I will purchase the a330 and happy to beta test!

40 Reply by tristarstuff

  • tristarstuff
  • New member
  • Offline
  • Registered: 2016-04-29
  • Posts: 1

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

I have acquired the beta for xp11.
After about 5 hours of flying this magnificent bird I am having the following problem:

When AP is activated the plane starts to follow the flight plan.
After a few seconds, a red SASL error message blinks on the display.
It is hard to read the complete message, however, the initial part says SASL error, some problem with activation....
After the error, the plane stops following the FMS and the only way to follow the plan is by activating HDG or manual flying...

Happy holidays!

41 Reply by rsvette12

  • rsvette12
  • Member
  • Offline
  • Registered: 2016-12-24
  • Posts: 35

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Hi:

Is it ok to buy at simmarket and use it in XP11 PB3 - I know A330 is not stable but would prefer to use it in PB3 - want to check it out nothing serious - understand its a wip - thank you

Regards, Rich

42 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Need wait PB4, i get info from Laminars today what needed changes will be included.

Please read a FAQ before you post a bug http://support.jardesign.org

43 Reply by Sloboda

  • Sloboda
  • Sloboda
  • Member
  • Offline
  • From: Fécamp, France
  • Registered: 2015-10-04
  • Posts: 233

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

tristarstuff wrote:

I have acquired the beta for xp11.
After about 5 hours of flying this magnificent bird I am having the following problem:

When AP is activated the plane starts to follow the flight plan.
After a few seconds, a red SASL error message blinks on the display.
It is hard to read the complete message, however, the initial part says SASL error, some problem with activation....
After the error, the plane stops following the FMS and the only way to follow the plan is by activating HDG or manual flying...

Happy holidays!

Same problem, i have a red text flash when i want enter a SID

VOICECOMMANDER CREATOR. Free and PRO profiles available on https://xplane.amisinformatique.com/

Windows 10 64bits – 6 coeurs I7 4,5 GHz - SSD – 32Go RAM – nVidia GTX Titan X 12Go – X-Plane 11 - A320 Neo Jardesign – A330 Jardesign - A350 FF - B777 FF - B767 FF - B757 V2 FF - Rotate MD80 - B737 IXEG - GH Deluxe - FollowMe - X-Life Deluxe

Sloboda's Website

44 Reply by rsvette12

  • rsvette12
  • Member
  • Offline
  • Registered: 2016-12-24
  • Posts: 35

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

J.A.Romanov wrote:

Need wait PB4, i get info from Laminars today what needed changes will be included.

Thank you looks like a great product smile Happy Holidays

45 Reply by rsvette12

  • rsvette12
  • Member
  • Offline
  • Registered: 2016-12-24
  • Posts: 35

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Hi couldnt wait bought A330 from simmarket but cant activate it in XP11 PB2 or PB3 - any help would be appreciated - is it possible to remove vc pilots - thank you

46 Reply by rsvette12

  • rsvette12
  • Member
  • Offline
  • Registered: 2016-12-24
  • Posts: 35

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Well I didn't know it downloaded a key file automatically into my downloads folder happen to see it there put it in main A330 folder all went well - pilots are gone also nice  smile

47 Reply by gizmo3311

  • gizmo3311
  • New member
  • Offline
  • Registered: 2015-04-20
  • Posts: 3

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

i just paid for the upgrade from x-plane 10 to x-plane 11, says it takes 18-24 hours for my key. i assume it's because of the holiday.

48 Reply by philwhite100

  • philwhite100
  • Member
  • Offline
  • Registered: 2015-05-02
  • Posts: 16

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

Sorry if I have missed this but does the Blue Sky Star sound pack work with this beta version thank you.

49 Reply by rsvette12

  • rsvette12
  • Member
  • Offline
  • Registered: 2016-12-24
  • Posts: 35

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

No reason Blue Sky would not work its just a sound replacement

50 Reply by kebs (edited by kebs 2016-12-25 15:26:00)

  • kebs
  • Member
  • Offline
  • From: Paris
  • Registered: 2015-09-05
  • Posts: 65

Re: v.2.0b1,b2,b3,b4,b5,b6,b7,b8,b9 for X-Plane 11 (Windows, MAC OS)

BSS sound doesn't work, I tried it ( Mac Version )