1 Topic by karterilla

  • karterilla
  • Member
  • Offline
  • Registered: 2015-06-15
  • Posts: 82

Topic: 11 Italian Airports for X-Life/FM

I have developed 11 set of files for X-Life/FM. I've tested and they are working.
Naturally all must be tested not only by myself.

Here the list:
LIBD Bari Palese
LICD Lampedusa
LICJ Palermo Punta Raisi
LICT Trapani Birgi
LIEA Alghero Fertilia
LIMC Milano LMalpensa
LIML Milano Linate
LIPE Bologna Borgo Panigale
LIRN Napoli Capodichino
LIRP Pisa San Giusto (this is a new version of already posted here)
LIRQ Firenze Peritola

For all but two (LIBD and LIRP) I did have used the X-Plane gateway scenery packages 3D latest.

I have tested with X-Plane 10.45.r2 and 10.50.b4 and latest version of X-Life/FM.

I did developed some other (not only italian) but some of them are not working alway giving me:
"MessageRed: Please turn On traffic before" x-life in X-Plane log but I do not know what is wrong.

Post's attachments

Attachment icon XLife Italian APTs.zip 30.29 kb, 715 downloads since 2016-06-25 

2 Reply by SirOTheOne

  • SirOTheOne
  • Member
  • Offline
  • From: LOWS
  • Registered: 2016-02-10
  • Posts: 126

Re: 11 Italian Airports for X-Life/FM

hi karterilla,

many thanks for your work. I know it´s a lot of work making taxi-routes (I have made about 15 to 20 airports), but i only have tested one airport and found many things that will not perfect work with x-life:

- make nodes as less as possible (read "tutorial" atc-routes)
- place stands very correct (in xlife the icon in WED is the FRONT of the airport not the middle)
- also place taxilines to the stands very accurate
- make correct definitions in gateeditor and radios

i have corrected your .dat and .txt files for LIPE and they work like it should be in xlife

thanks for your work

karterilla wrote:

I have developed 11 set of files for X-Life/FM. I've tested and they are working.
Naturally all must be tested not only by myself.

Here the list:
LIBD Bari Palese
LICD Lampedusa
LICJ Palermo Punta Raisi
LICT Trapani Birgi
LIEA Alghero Fertilia
LIMC Milano LMalpensa
LIML Milano Linate
LIPE Bologna Borgo Panigale
LIRN Napoli Capodichino
LIRP Pisa San Giusto (this is a new version of already posted here)
LIRQ Firenze Peritola

For all but two (LIBD and LIRP) I did have used the X-Plane gateway scenery packages 3D latest.

I have tested with X-Plane 10.45.r2 and 10.50.b4 and latest version of X-Life/FM.

I did developed some other (not only italian) but some of them are not working alway giving me:
"MessageRed: Please turn On traffic before" x-life in X-Plane log but I do not know what is wrong.

Post's attachments

Attachment icon LIPE.dat 13.93 kb, 297 downloads since 2016-06-25 

Attachment icon LIPE.txt 2.02 kb, 336 downloads since 2016-06-25 

iMac i7 4GHz (late 2015) 27" 24 GB, macOS Mojave 10.14.5, AMD Radeon R9 M395X 4096MB
XPlane 11.34, FM, X-Life, GroundHandling, about 50 payware aircrafts

3 Reply by randyran

  • randyran
  • Member
  • Offline
  • From: LIBG
  • Registered: 2016-02-17
  • Posts: 16

Re: 11 Italian Airports for X-Life/FM

SirOTheOne wrote:

hi karterilla,

many thanks for your work. I know it´s a lot of work making taxi-routes (I have made about 15 to 20 airports), but i only have tested one airport and found many things that will not perfect work with x-life:

- make nodes as less as possible (read "tutorial" atc-routes)
- place stands very correct (in xlife the icon in WED is the FRONT of the airport not the middle)
- also place taxilines to the stands very accurate
- make correct definitions in gateeditor and radios

i have corrected your .dat and .txt files for LIPE and they work like it should be in xlife

thanks for your work

You been quicker than me to edit LIPE. Right now was editing that while i found you already fixed it.

Many thanks.

4 Reply by pic

  • pic
  • pic
  • Member
  • Offline
  • From: Tardis, somewhere in time,Univ
  • Registered: 2015-04-14
  • Posts: 129

Re: 11 Italian Airports for X-Life/FM

Wow, Thats a yuge amount of work you did! Thanks for your contribution, I'll def check it out!

karterilla wrote:

I have developed 11 set of files for X-Life/FM. I've tested and they are working.
Naturally all must be tested not only by myself.

Here the list:
LIBD Bari Palese
LICD Lampedusa
LICJ Palermo Punta Raisi
LICT Trapani Birgi
LIEA Alghero Fertilia
LIMC Milano LMalpensa
LIML Milano Linate
LIPE Bologna Borgo Panigale
LIRN Napoli Capodichino
LIRP Pisa San Giusto (this is a new version of already posted here)
LIRQ Firenze Peritola

For all but two (LIBD and LIRP) I did have used the X-Plane gateway scenery packages 3D latest.

I have tested with X-Plane 10.45.r2 and 10.50.b4 and latest version of X-Life/FM.

I did developed some other (not only italian) but some of them are not working alway giving me:
"MessageRed: Please turn On traffic before" x-life in X-Plane log but I do not know what is wrong.

“The universe is big. It’s vast, complicated and ridiculous. And sometimes, very rarely, impossible things just happen and we call them miracles.”The Doctor
Win7Pro64/i76700k 4.6/GTX 1080ti STRIX oc/32gbCorsairVengeance DD4Ram3000/ASUS Z170Deluxe

5 Reply by karterilla

  • karterilla
  • Member
  • Offline
  • Registered: 2015-06-15
  • Posts: 82

Re: 11 Italian Airports for X-Life/FM

Thank you SirOTheOne for pointing me out what should be corrected.
Did you ever step in airport which it is not working after creating the ",dat" file.
I've 3 of them which refuse to work having only a line in XP log file saying Please turn On traffic before.

These are my very first efforts with WED and X-Life and I developed for myself but like to share.

Welcome everybody to use them and correct all the different files.
Please post the changes as for LIPE.

Thanx

6 Reply by SirOTheOne

  • SirOTheOne
  • Member
  • Offline
  • From: LOWS
  • Registered: 2016-02-10
  • Posts: 126

Re: 11 Italian Airports for X-Life/FM

Hi,

corrected and adapted LIRQ files

in future, please less nodes and all available stands/gates.

great work

karterilla wrote:

Thank you SirOTheOne for pointing me out what should be corrected.
Did you ever step in airport which it is not working after creating the ",dat" file.
I've 3 of them which refuse to work having only a line in XP log file saying Please turn On traffic before.

These are my very first efforts with WED and X-Life and I developed for myself but like to share.

Welcome everybody to use them and correct all the different files.
Please post the changes as for LIPE.

Thanx

Post's attachments

Attachment icon LIRQ.dat 7.14 kb, 301 downloads since 2016-06-26 

Attachment icon LIRQ.txt 1.01 kb, 333 downloads since 2016-06-26 

iMac i7 4GHz (late 2015) 27" 24 GB, macOS Mojave 10.14.5, AMD Radeon R9 M395X 4096MB
XPlane 11.34, FM, X-Life, GroundHandling, about 50 payware aircrafts

7 Reply by SirOTheOne

  • SirOTheOne
  • Member
  • Offline
  • From: LOWS
  • Registered: 2016-02-10
  • Posts: 126

Re: 11 Italian Airports for X-Life/FM

Hi,
corrected and adapted LIRN files

karterilla wrote:

Thank you SirOTheOne for pointing me out what should be corrected.
Did you ever step in airport which it is not working after creating the ",dat" file.
I've 3 of them which refuse to work having only a line in XP log file saying Please turn On traffic before.

These are my very first efforts with WED and X-Life and I developed for myself but like to share.

Welcome everybody to use them and correct all the different files.
Please post the changes as for LIPE.

Thanx

Post's attachments

Attachment icon LIRN.dat 9.12 kb, 291 downloads since 2016-06-26 

Attachment icon LIRN.txt 1.22 kb, 324 downloads since 2016-06-26 

iMac i7 4GHz (late 2015) 27" 24 GB, macOS Mojave 10.14.5, AMD Radeon R9 M395X 4096MB
XPlane 11.34, FM, X-Life, GroundHandling, about 50 payware aircrafts

8 Reply by randyran

  • randyran
  • Member
  • Offline
  • From: LIBG
  • Registered: 2016-02-17
  • Posts: 16

Re: 11 Italian Airports for X-Life/FM

Karterilla, I've checked LIBD taxiroutes and you done a extra work, since I already released LIBD with corrected exits and apron, according LIBD charts.

Here you can find the updated taxiroutes  for LIBD.

Just 1 point. When extract taxiroutes from custom sceneries, check always the airport charts, finding notes and drawing. This make you sure that the airport don't have wrong traffic flow.

9 Reply by karterilla

  • karterilla
  • Member
  • Offline
  • Registered: 2015-06-15
  • Posts: 82

Re: 11 Italian Airports for X-Life/FM

randyran wrote:

Karterilla, I've checked LIBD taxiroutes and you done a extra work, since I already released LIBD with corrected exits and apron, according LIBD charts.

Here you can find the updated taxiroutes  for LIBD.

Just 1 point. When extract taxiroutes from custom sceneries, check always the airport charts, finding notes and drawing. This make you sure that the airport don't have wrong traffic flow.


Thank you very much.
Great job.

Tanks to all of you.

Will do.

10 Reply by SirOTheOne

  • SirOTheOne
  • Member
  • Offline
  • From: LOWS
  • Registered: 2016-02-10
  • Posts: 126

Re: 11 Italian Airports for X-Life/FM

Hi,

adapted and corrected LICJ


karterilla wrote:
randyran wrote:

Karterilla, I've checked LIBD taxiroutes and you done a extra work, since I already released LIBD with corrected exits and apron, according LIBD charts.

Here you can find the updated taxiroutes  for LIBD.

Just 1 point. When extract taxiroutes from custom sceneries, check always the airport charts, finding notes and drawing. This make you sure that the airport don't have wrong traffic flow.


Thank you very much.
Great job.

Tanks to all of you.

Will do.

Post's attachments

Attachment icon LICJ.dat 9.55 kb, 318 downloads since 2016-06-26 

Attachment icon LICJ.txt 1.25 kb, 296 downloads since 2016-06-26 

iMac i7 4GHz (late 2015) 27" 24 GB, macOS Mojave 10.14.5, AMD Radeon R9 M395X 4096MB
XPlane 11.34, FM, X-Life, GroundHandling, about 50 payware aircrafts

11 Reply by federicovilla

  • federicovilla
  • Member
  • Offline
  • Registered: 2016-06-04
  • Posts: 5

Re: 11 Italian Airports for X-Life/FM

Great stuff...thanks a lot from an italian pilot smile.
Any chance to get LIPH ( Treviso) and LIPZ ( Venezia) traffic? Thanks a lot

12 Reply by karterilla

  • karterilla
  • Member
  • Offline
  • Registered: 2015-06-15
  • Posts: 82

Re: 11 Italian Airports for X-Life/FM

federicovilla wrote:

Great stuff...thanks a lot from an italian pilot smile.
Any chance to get LIPH ( Treviso) and LIPZ ( Venezia) traffic? Thanks a lot

LIPZ it is not working in X-Life (together with LIEE Cagliari) whatever scenery I do use.
I 've spent a couple of days for each airports with no luck. It always keep saying I need to turn On traffic before while the plugin it is already been started uo.
Need to understand in which way X-Life can be logged to understand what's going wrong.

Will work on LIPH and other northern italian ones (XP gateway scenery pkg) as soon I do have finished southern italian (small?) airports: I do have ready (need people testing/check them; thanks to SirOTheOne specially and randyran for their suggestion) the following:
LICA LICB LICG LICT.

Will post them hoping they are a better effort then the first ones.
These are working but again for my way of using them, which cannot be perfect or the way it should be in the X_life creators view.

I do also have some other southern Med APTs already ready for debugging. Together with GCLP.

Ciao

13 Reply by SirOTheOne (edited by SirOTheOne 2016-06-28 14:52:37)

  • SirOTheOne
  • Member
  • Offline
  • From: LOWS
  • Registered: 2016-02-10
  • Posts: 126

Re: 11 Italian Airports for X-Life/FM

Hi karterilla,

i already have made LIPZ and LIPQ and they work well. Design was i bit tricky

on LIPZ use V2 to ignore rwy 04L/22R (normally closed)

karterilla wrote:
federicovilla wrote:

Great stuff...thanks a lot from an italian pilot smile.
Any chance to get LIPH ( Treviso) and LIPZ ( Venezia) traffic? Thanks a lot

LIPZ it is not working in X-Life (together with LIEE Cagliari) whatever scenery I do use.
I 've spent a couple of days for each airports with no luck. It always keep saying I need to turn On traffic before while the plugin it is already been started uo.
Need to understand in which way X-Life can be logged to understand what's going wrong.

Will work on LIPH and other northern italian ones (XP gateway scenery pkg) as soon I do have finished southern italian (small?) airports: I do have ready (need people testing/check them; thanks to SirOTheOne specially and randyran for their suggestion) the following:
LICA LICB LICG LICT.

Will post them hoping they are a better effort then the first ones.
These are working but again for my way of using them, which cannot be perfect or the way it should be in the X_life creators view.

I do also have some other southern Med APTs already ready for debugging. Together with GCLP.

Ciao

Post's attachments

Attachment icon LIPQ.dat 8.83 kb, 296 downloads since 2016-06-28 

Attachment icon LIPQ.txt 1.24 kb, 296 downloads since 2016-06-28 

Attachment icon LIPQ_Scenery_Pack.zip 109.2 kb, 284 downloads since 2016-06-28 

Attachment icon LIPZ V2.dat 18.27 kb, 256 downloads since 2016-06-28 

Attachment icon LIPZ.dat 18.8 kb, 277 downloads since 2016-06-28 

Attachment icon LIPZ.txt 2.69 kb, 526 downloads since 2016-06-28 

Attachment icon LIPZ.zip 33.03 mb, 374 downloads since 2016-06-28 

iMac i7 4GHz (late 2015) 27" 24 GB, macOS Mojave 10.14.5, AMD Radeon R9 M395X 4096MB
XPlane 11.34, FM, X-Life, GroundHandling, about 50 payware aircrafts

14 Reply by karterilla

  • karterilla
  • Member
  • Offline
  • Registered: 2015-06-15
  • Posts: 82

Re: 11 Italian Airports for X-Life/FM

SirOTheOne wrote:

Hi karterilla,

i already have made LIPZ and LIPQ and they work well. Design was i bit tricky

karterilla wrote:
federicovilla wrote:

Great stuff...thanks a lot from an italian pilot smile.
Any chance to get LIPH ( Treviso) and LIPZ ( Venezia) traffic? Thanks a lot

LIPZ it is not working in X-Life (together with LIEE Cagliari) whatever scenery I do use.
I 've spent a couple of days for each airports with no luck. It always keep saying I need to turn On traffic before while the plugin it is already been started uo.
Need to understand in which way X-Life can be logged to understand what's going wrong.

Will work on LIPH and other northern italian ones (XP gateway scenery pkg) as soon I do have finished southern italian (small?) airports: I do have ready (need people testing/check them; thanks to SirOTheOne specially and randyran for their suggestion) the following:
LICA LICB LICG LICT.

Will post them hoping they are a better effort then the first ones.
These are working but again for my way of using them, which cannot be perfect or the way it should be in the X_life creators view.

I do also have some other southern Med APTs already ready for debugging. Together with GCLP.

Ciao


WOW THAT'S GREAT.

In which way do you have LIPZ working? What scenery pkg did you have used?
Did you try LIEE? Even that one it not working for me same error after X_Life loads.


Later I'll post in a new thread the other 4 APTs and to make happy our friend even LIPH (I was working on that one some times ago and was almost - I said almost - ready to go).

Thank a lot.
Hope everyone can enjoy your contributions.

Thanx

15 Reply by SirOTheOne (edited by SirOTheOne 2016-06-28 14:58:22)

  • SirOTheOne
  • Member
  • Offline
  • From: LOWS
  • Registered: 2016-02-10
  • Posts: 126

Re: 11 Italian Airports for X-Life/FM

use scenery which if had upload (ZIP-files)

on LIPZ there are 2 possibilities LIPZ.dat and LIPZ V2.dat (please read above)

rwy 04L/22R is normally closed and used as taxiway (see charts) and in reality it is true, too.

use V2 to get not to much traffic for one runway, because xlife doesn´t check it, that only one rwy is in use (it´s a small bug)

LIEE if have not tried

karterilla wrote:
SirOTheOne wrote:

Hi karterilla,

i already have made LIPZ and LIPQ and they work well. Design was i bit tricky

karterilla wrote:

LIPZ it is not working in X-Life (together with LIEE Cagliari) whatever scenery I do use.
I 've spent a couple of days for each airports with no luck. It always keep saying I need to turn On traffic before while the plugin it is already been started uo.
Need to understand in which way X-Life can be logged to understand what's going wrong.

Will work on LIPH and other northern italian ones (XP gateway scenery pkg) as soon I do have finished southern italian (small?) airports: I do have ready (need people testing/check them; thanks to SirOTheOne specially and randyran for their suggestion) the following:
LICA LICB LICG LICT.

Will post them hoping they are a better effort then the first ones.
These are working but again for my way of using them, which cannot be perfect or the way it should be in the X_life creators view.

I do also have some other southern Med APTs already ready for debugging. Together with GCLP.

Ciao


WOW THAT'S GREAT.

In which way do you have LIPZ working? What scenery pkg did you have used?
Did you try LIEE? Even that one it not working for me same error after X_Life loads.


Later I'll post in a new thread the other 4 APTs and to make happy our friend even LIPH (I was working on that one some times ago and was almost - I said almost - ready to go).

Thank a lot.
Hope everyone can enjoy your contributions.

Thanx

iMac i7 4GHz (late 2015) 27" 24 GB, macOS Mojave 10.14.5, AMD Radeon R9 M395X 4096MB
XPlane 11.34, FM, X-Life, GroundHandling, about 50 payware aircrafts