1 Topic by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Topic: v.1.3b1 distributive (Windows 7/8, MAC OS)

Beta

v.1.3b1 distributive (Windows 7/8, MAC OS)

New:
- 10.50 ready
- X-Life ready
- FMGS improved
- Cockpit textures and details improved


Please install it as CLEAR!!! installation, not mix files with other version.

Download link http://jardesign.org/a330/download/inst … _1.3b1.zip

HOW TO INSTALL:
  - be sure, that you use X-Plane 10.36+
  - copy unziped "330_JARDesign" folder to ..\X-Plane 10\Aircraft\ folder
    (be sure, what you are not use nonEnglish symbols in aircraft installation path)
  - Download more fresh version of «GndHandling» plugin from official
    board http://jardesign.org/forum/viewforum.php?id=29
  - copy unzipped «GndHandling» folder to ../X-PLANE 10/Resources/plugins/ folder
  - start X-Plane 64 bit and open a330, activation window is going to show up
  - enter your serial key (Regcode), click NEXT and after a successful activation reopen aircraft via X-Plane menu
  - activation works well with both MAC/WIN 64 bit

UPDATE YOU NAV DATA WITH FRESH CYCLE (if needed)
a330 use NavData from
../X-PLANE 10/Custom Data/GNS430/navdata/ folder
if not find there – will try to read it from
..X:/X-PLANE 10/Resources/GNS430/navdata/
If you need update your cycle, please use Aerosoft/Navigraph
- “a320/330 Native format” or (the same in fact)
- “XPLANE_GNS430_777WORLDLINER_FF757PROF_NATIVE”
and put new cycle to ..X-PLANE 10/Custom Data/GNS430/navdata/ folder

If your activations are over - use contact form at official website http://jardesign.org/a330/


Thank you!!!!

Please read a FAQ before you post a bug http://support.jardesign.org

2 Reply by Metallist (edited by Metallist 2016-05-14 13:45:45)

  • Metallist
  • Member
  • Offline
  • From: ULLI
  • Registered: 2016-01-17
  • Posts: 38

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

In the cockpit do not work the sounds of the switches, not hear the engines. Work voice of the staff, confirm the position of flap, confirmation checklist, dialogue with the tug, sound GndHandling plugin.

Update: File A330JD_1.3b1.zip\330_JARDesign\plugins\sound3d\win._xpl

update2: don't work the sound keys on the overhead

3 Reply by joni80

  • joni80
  • Member
  • Offline
  • Registered: 2015-06-19
  • Posts: 35

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

The sounds didn't work at first, but when I renamed the file from win._xpl to win.xpl it works, the _ should not be there. Also The bulk door does not close when the ground handling drives away, and stays open, until I manually close it. Lastly the wipers do not function by themselves, so one wiper switch will activate both Captain and FO wipers.

4 Reply by Metallist (edited by Metallist 2016-05-14 19:58:42)

  • Metallist
  • Member
  • Offline
  • From: ULLI
  • Registered: 2016-01-17
  • Posts: 38

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Not working mode T. O. switch "SW NOSE". Light remains as in the mode of TAXI.

NOSE SW
Operation of taxi and take-off lights.
T.O. - Both taxi and take-off lights are illuminated.
TAXI - Only taxi light is illuminated.
OFF - Taxi and take-off lights off.

http://jardesign.org/forum/img/m/2023/t/p1aiodhrnpm0c1enobuv1a1a1fav3.png

5 Reply by joni80

  • joni80
  • Member
  • Offline
  • Registered: 2015-06-19
  • Posts: 35

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Also what I found was that I could not enter a cruising altitude, as every altitude was rejected with the reason of being too high, although I even entered an altitude of only 5000 feet, but it was rejected.

6 Reply by Metallist

  • Metallist
  • Member
  • Offline
  • From: ULLI
  • Registered: 2016-01-17
  • Posts: 38

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

When testing the APU fire protection system, as highlighted in the scope of fire protection systems of engines.

http://jardesign.org/forum/img/m/2023/t/p1aiq1l2kob481r7e1uoh1jjl14l83.png

7 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

joni80 wrote:

Also what I found was that I could not enter a cruising altitude, as every altitude was rejected with the reason of being too high, although I even entered an altitude of only 5000 feet, but it was rejected.

Not altitude, but FL. 5000 should be 50 as FL.

Please read a FAQ before you post a bug http://support.jardesign.org

8 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Metallist wrote:

When testing the APU fire protection system, as highlighted in the scope of fire protection systems of engines.

http://jardesign.org/forum/img/m/2023/t/p1aiq1l2kob481r7e1uoh1jjl14l83.png

Not sure what understand what wrong exactly..

Please read a FAQ before you post a bug http://support.jardesign.org

9 Reply by Metallist

  • Metallist
  • Member
  • Offline
  • From: ULLI
  • Registered: 2016-01-17
  • Posts: 38

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

J.A.Romanov wrote:
Metallist wrote:

When testing the APU fire protection system, as highlighted in the scope of fire protection systems of engines.

http://jardesign.org/forum/img/m/2023/t/p1aiq1l2kob481r7e1uoh1jjl14l83.png

Not sure what understand what wrong exactly..

При нажатии кнопки проверки противопожарной системы APU начинают подсвечиваться рамки которые обозначены стрелками. Так и должно быть?

10 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Metallist wrote:

Not working mode T. O. switch "SW NOSE". Light remains as in the mode of TAXI.

NOSE SW
Operation of taxi and take-off lights.
T.O. - Both taxi and take-off lights are illuminated.
TAXI - Only taxi light is illuminated.
OFF - Taxi and take-off lights off.

http://jardesign.org/forum/img/m/2023/t/p1aiodhrnpm0c1enobuv1a1a1fav3.png


Thanks for this issue!

Please read a FAQ before you post a bug http://support.jardesign.org

11 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Metallist wrote:
J.A.Romanov wrote:
Metallist wrote:

When testing the APU fire protection system, as highlighted in the scope of fire protection systems of engines.

http://jardesign.org/forum/img/m/2023/t/p1aiq1l2kob481r7e1uoh1jjl14l83.png

Not sure what understand what wrong exactly..

При нажатии кнопки проверки противопожарной системы APU начинают подсвечиваться рамки которые обозначены стрелками. Так и должно быть?

Вижу. Спасибо! Нет, так не должно быть, проверим можно ли поправить..

Please read a FAQ before you post a bug http://support.jardesign.org

12 Reply by Acei

  • Acei
  • Member
  • Offline
  • Registered: 2015-05-26
  • Posts: 128

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Installed the beta.  When I activate, I get a CTD.  Try to reload the plane and get a CTD.  Seems to be an SASL issue.

Anyone any ideas?

Post's attachments

Attachment icon Log.txt 50 kb, 421 downloads since 2016-05-15 

13 Reply by joni80

  • joni80
  • Member
  • Offline
  • Registered: 2015-06-19
  • Posts: 35

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

J.A.Romanov wrote:
joni80 wrote:

Also what I found was that I could not enter a cruising altitude, as every altitude was rejected with the reason of being too high, although I even entered an altitude of only 5000 feet, but it was rejected.

Not altitude, but FL. 5000 should be 50 as FL.

Yes, that could work, but I also tried to enter 300 for 30000 ft and it also gave me the error of the altitude being too high, it was for every altitude I was trying to enter.

14 Reply by Franz007

  • Franz007
  • Member
  • Offline
  • Registered: 2015-04-15
  • Posts: 101

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Thanks but the APU still doesn't burn fuel and there is still no Flaps-2 take off calculated in the MCDU. How long do we have to wait before you fix some minor issues that have been reported a long time ago?

15 Reply by ilankrt

  • ilankrt
  • Member
  • Offline
  • Registered: 2015-10-20
  • Posts: 774

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

v.1.3b1 distributive
First test flight with  this new version

1. cold start, over head panel light switch don't function
2. during normal descent 2 times AP disconnect alarm (didn't see any unusual occurrence )
3. seems to be more stable landing manually at 1000 feet (at crosswind 6).

X-Plane 11.30r3 | iMac27 OSX Mojave 14.10.4, | Samsung ultra-wide screen 49-inch | Saitek equipment | MFG pedals |Gladiator Joystick | Plugins: GndHandling, RWC, SMP, SoundM, X-Life, BetterPushback, AutoGate, SoundMaxx, X-ATC-chatter, X-Camera | iPad 12.9, iPad Air 9.7  | Airliner: JAR A320/A330, FF A350XWB, FF B767, SSG B747-8 inter, Epic1000 new, TBM900  http://ilankrt1.blogspot.co.il

16 Reply by captbullett (edited by captbullett 2016-05-15 22:57:42)

  • captbullett
  • Member
  • Offline
  • Registered: 2015-04-08
  • Posts: 975

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

ilankrt wrote:

v.1.3b1 distributive
First test flight with  this new version

1. cold start, over head panel light switch don't function
2. during normal descent 2 times AP disconnect alarm (didn't see any unusual occurrence )
3. seems to be more stable landing manually at 1000 feet (at crosswind 6).

Good day,

OK so again where is the log.txt and the box.txt so JAR can work on fixing the bugs if there are any,
and did you re-load the aircraft after the first download, install and activation.

So, after you activate the aircraft you should close the X-Plane app and re-start then re-start the A330

and yes I had the same issue as we are testing a new MCDU ... and all log's and box.txt are required for this and X-Life.

captbullett

17 Reply by captbullett

  • captbullett
  • Member
  • Offline
  • Registered: 2015-04-08
  • Posts: 975

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Acei wrote:

Installed the beta.  When I activate, I get a CTD.  Try to reload the plane and get a CTD.  Seems to be an SASL issue.

Anyone any ideas?


Good day,

and Airport-Navigator v1.3.1 [INFO]: AptNav::pluginEnable
Airport-Navigator v1.3.1 [INFO]: loading hotkey CENTER

you really do not need the plugin above takes to long to load ..

But the last time i had the issue you have run your X-Plane installer and see if the installer will fix the SASL issue it should.
Brian

18 Reply by Acei

  • Acei
  • Member
  • Offline
  • Registered: 2015-05-26
  • Posts: 128

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

captbullett wrote:
Acei wrote:

Installed the beta.  When I activate, I get a CTD.  Try to reload the plane and get a CTD.  Seems to be an SASL issue.

Anyone any ideas?


Good day,

and Airport-Navigator v1.3.1 [INFO]: AptNav::pluginEnable
Airport-Navigator v1.3.1 [INFO]: loading hotkey CENTER

you really do not need the plugin above takes to long to load ..

But the last time i had the issue you have run your X-Plane installer and see if the installer will fix the SASL issue it should.
Brian

I'll give that a go Brian.  Thanks.

19 Reply by Acei

  • Acei
  • Member
  • Offline
  • Registered: 2015-05-26
  • Posts: 128

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Made no difference, still getting a CTD.  I'm on the Steam version.  Is anyone else having CTD issues with Steam?

20 Reply by Acei

  • Acei
  • Member
  • Offline
  • Registered: 2015-05-26
  • Posts: 128

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Tried everything at this stage.  Using the Steam version of XP.  Refreshed the install, removed all plugins and downloaded and reinstalled the A330.  Still getting a CTD and the following reason in the log file:

[SASL ERROR] can't load component    scratchpad
[SASL ERROR] Error loading panel: [string ".../scripts/init.sec"]:0: attempt to index a nil value
--=={This application has crashed because of the plugin: SASL}==--

21 Reply by captbullett (edited by captbullett 2016-05-16 22:09:15)

  • captbullett
  • Member
  • Offline
  • Registered: 2015-04-08
  • Posts: 975

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Acei wrote:

Tried everything at this stage.  Using the Steam version of XP.  Refreshed the install, removed all plugins and downloaded and reinstalled the A330.  Still getting a CTD and the following reason in the log file:

[SASL ERROR] can't load component    scratchpad
[SASL ERROR] Error loading panel: [string ".../scripts/init.sec"]:0: attempt to index a nil value
--=={This application has crashed because of the plugin: SASL}==--


Good day,

you need to go to the Steam website tech support and see what their remedy is for you issue Wow, this is why I spend the $ for the disks I like to be able to fix it if possible but the Steam site should be able to get things sorted out right.
your friend,
Brian

22 Reply by Acei

  • Acei
  • Member
  • Offline
  • Registered: 2015-05-26
  • Posts: 128

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

I find it hard to believe that this is a Steam issue.  The previous version worked and still works when I reinstall it.  All other a/c also work fine.  I think Eugeny needs to take a look.  It would be interesting to know if anyone else with the Steam version has had this issue.

23 Reply by captbullett

  • captbullett
  • Member
  • Offline
  • Registered: 2015-04-08
  • Posts: 975

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Acei wrote:

I find it hard to believe that this is a Steam issue.  The previous version worked and still works when I reinstall it.  All other a/c also work fine.  I think Eugeny needs to take a look.  It would be interesting to know if anyone else with the Steam version has had this issue.

Good day,

Well, you ran the Installer and I had an issue with SASL ran the installer
and I was able to fix the issue the only other thing is re-download the aircraft that the SASL issue is showing up on.
your friend,
Brian

24 Reply by TDPlane

  • TDPlane
  • Privileged
  • Offline
  • From: Amsterdam
  • Registered: 2015-01-22
  • Posts: 446

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

So is the new version v.1.3b1 distributive (Windows 7/8, MAC OS) OK to download?
I'm confused ...

Sierra 10.13.6 - 4.5 GHz i7 - Retina 5120 x 2880 - 16 GB - Radeon Pro 580 8 GB - X-Plane 11 - Ravcore Javelin - 767 FF - 777 FF - 787 Dreamliner - plugin tester Airbus A350 FF - A320Neo JD - A380 PH - A330 PH - alpha/beta tester A330 JD - CRJ200 - beta tester 747-8i SSG - IXEG 733 - EADT 737-800 v5 - 757 v2 FF - ZIBO 737-800 - SSG Embrear 195 - FF A320

25 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: v.1.3b1 distributive (Windows 7/8, MAC OS)

Acei wrote:

Installed the beta.  When I activate, I get a CTD.  Try to reload the plane and get a CTD.  Seems to be an SASL issue.

Anyone any ideas?

Seems like wrong installation (mix files, etc)

Please read a FAQ before you post a bug http://support.jardesign.org