[ Closed ] a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11) (Page 8 of 11)

**J.A.Romanov** · 2017-04-14 09:43:42

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

dimkzr wrote:

rdrehmer wrote:
Well, it`s very unfortunate to know about that. I just had a quick chat with him on Skype 10 min ago and the conclusion was
“This feature exist at real airbus but work different, depend of MCDU software version.” (his words).
I`m not a real a320 pilot, so I don`t have parameters to disagree. But comparing to other FMCs, this indeed seems to be very strange.
On his place, I would rather deactivate this feature than letting it buggy like this.
The last time I tested, it automatically inserted a FL003 (300ft). Huuuum I don`t think I want to fly this low, thanks.
Can JAR prove his statement with references to FCOM/QRH or any other real document?
Let's pretend this feature do exist on a real A320. Then can JAR please explain the logic behind it? Why it randomly changing FL to random values, or even to complete nonsense?

Если интересно.. Ну нужно просто позвонить - расскажу, какие трудности то?

Please read a FAQ before you post a bug http://support.jardesign.org

**colinah** · 2017-04-14 10:38:08

colinah
Member
Offline

Registered: 2015-04-22
Posts: 138

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

I too am having problems leaving EGCC on the LISTO departure from 23R. (See post 170) I am using 1704, the problem seems to me that the first waypoint shown on the plan is FD30RD23R then followed by CD50, which is completely in the opposite direction to the runway heading.
I also tried R23 on a SANBA departure, again heading off to FD30RD23R in the wrong direction.
It could be something I'm doing wrong, but it didn't happen before a couple of A320 updates ago.

**ilankrt** · 2017-04-14 11:59:05

ilankrt
Member
Offline

Registered: 2015-10-20
Posts: 772

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

J.A.Romanov wrote:

ilankrt wrote:
As I said, JAR A320 is not yet 100% stable. I am one of those who try to help to get the optimum out of this model.
After perfect flight I also experienced a malfunction with the MCDU. After changing landing data (RWY, APPR...) during flight, I saw the new route on ND but the route wasn't display any more on MCDU.

If you use Plan view of ND, you need scroll to point you need to see at MCDU

I switched to plan and tried to scroll but it didn't work.

The only thing I could do is back on MCDU to UUEE airport and try to input
RWY and APPR for new, but route didn't appear and scrolling was not possible (even plan mode on ND). The problem with re-programming RWY and APPR during flight (after I programed on MCDU before take off) and choosing another RWY (because of X-Life ATC advice) occurs several times....

**J.A.Romanov** · 2017-04-14 13:33:10

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Ok, now about NEW CRZ FL issue..

If you are on v3r4 and still have this issue, please take this file and put it to
../X-Plane_11/Aircraft/320_JARDesign/Custom Avionics/sys_mcdu/ folder

!!! Please inform me about results here or (better, if issue not gone) to skype j.a.romanov

Sure, NEW CRZ FL is normal Airbus function, but it should work if (and only)

Departure..TOC Distance + TOD..Arrival Distance < Flight Plan Distance
(for entered CRZ FL)

Post's attachments

mcdu_fpln.sec 147.5 kb, 303 downloads since 2017-04-14

Please read a FAQ before you post a bug http://support.jardesign.org

**J.A.Romanov** · 2017-04-14 13:34:26

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

About "flying ground cars" issue..

If you are on v3r4 and thill have this issue, please take this file and put it to
../X-Plane_11/Aircraft/320_JARDesign/Custom Avionics/ folder

Post's attachments

ground.sec 11.72 kb, 265 downloads since 2017-04-14

Please read a FAQ before you post a bug http://support.jardesign.org

**Zmile** · 2017-04-14 14:25:42

Zmile
Member
Offline

Registered: 2017-04-09
Posts: 13

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Guys i need some info about one thing,

When landing if the plane Bounce (crappy landing i know) but it Bounce and it auto assumes go around (although i can still land it) hmm it retracts the speed brake and wont let me deploy them. Question, am i commited to go around at that point or can i force the speed brake a to deploy (well ir wont let me but is it normal?)

**thomas_99** · 2017-04-14 14:46:15

thomas_99
Member
Offline

Registered: 2015-05-04
Posts: 235

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Hi !

J.A.Romanov wrote:

Ok, now about NEW CRZ FL issue..
If you are on v3r4 and still have this issue, please take this file and put it to
../X-Plane_11/Aircraft/320_JARDesign/Custom Avionics/sys_mcdu/ folder

!!! Please inform me about results here or (better, if issue not gone) to skype j.a.romanov
Sure, NEW CRZ FL is normal Airbus function, but it should work if (and only)
Departure..TOC Distance + TOD..Arrival Distance < Flight Plan Distance
(for entered CRZ FL)

Congratulations, working for me (1. flight: EDNY->EDDL, FL390, no problem !!)

best regards,

**ilankrt** · 2017-04-14 16:53:57

ilankrt
Member
Offline

Registered: 2015-10-20
Posts: 772

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Did you need to insert the "mcdi_fpln.sec file ?

thomas_99 wrote:

Hi !
J.A.Romanov wrote:
Ok, now about NEW CRZ FL issue..
If you are on v3r4 and still have this issue, please take this file and put it to
../X-Plane_11/Aircraft/320_JARDesign/Custom Avionics/sys_mcdu/ folder

!!! Please inform me about results here or (better, if issue not gone) to skype j.a.romanov
Sure, NEW CRZ FL is normal Airbus function, but it should work if (and only)
Departure..TOC Distance + TOD..Arrival Distance < Flight Plan Distance
(for entered CRZ FL)
Congratulations, working for me (1. flight: EDNY->EDDL, FL390, no problem !!)
best regards,

**thomas_99** · 2017-04-14 17:52:09

thomas_99
Member
Offline

Registered: 2015-05-04
Posts: 235

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Hi !

ilankrt wrote:

Did you need to insert the "mcdi_fpln.sec file ?

Yes, as described. Not 'insert', replace it, overwrite the old file.

**ilankrt** · 2017-04-14 21:16:50

ilankrt
Member
Offline

Registered: 2015-10-20
Posts: 772

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

15. APRL 22.00 GDZ
STREAMING TEST FLIGHT A320r4

http://ilankrt1.blogspot.co.il/2016/12/ … ne-10.html
www.twitch.tv/ilankrt

Note that I am also testing streaming (FPS, quality....)
Your responding is welcome

**awf757** · 2017-04-14 22:41:28

awf757
New member
Offline

Registered: 2016-05-17
Posts: 2

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Ok was trying out the bus for XP 11 , nice work.
(have the bus for P3D (FSLABSA320))

Noticed the system level is at a very basic level and was prepared upfront and operated in normal law.
So I looked at this from that perspective and as a dev from the dark site lol, noticed a few things which I wouldn't expect.

- Almost level of at FL100 to accelerate and then start the climb again.
- Overshooting way points in turns by a large margin
- Loosing the flight path and have a mind of it's own (also during a RNAV approach)
- MCDU (FMGS) when programming more airways in sequence not possible
- MCDU (FMGS) when not inserting the way points but programming more in sequence (yellow text) and then insert the FMGS crashes
- APU starting up sequence wrong!
- RNAV approaches no VDEV simulated?
- Love the model and reflection stuff in XP and also the 3d party BSS sounds
- Would prefer to have a few more steps in the display intensity level find it two steps to low...
- Some strange color way point lines blue instead of green with RNAV
- New FL CRZ logic not correct when starting with a sid and a star in the flight plan
- THE MCDU should show the correct current way points and below in the MCDU page but in this bus it stays where is left by the pilot and is static.
- ECAM message no FLEX set is strange and not expected... curious after which software version you modeled this bus.
- Reflections are over done for the display and windows (already discovered the windows one so easy to adjust but what is used for the displays)?

Ok much more to discover and will have a more in depth look...

Hope it's helpful...

André

Cheers,

**rdrehmer** · 2017-04-15 02:20:16

rdrehmer
Member
Offline

Registered: 2017-04-11
Posts: 28

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

It happens some times during takeoff the airplane start rotating way before V1, just like if the trim was in the wrong position. What am I doing wrong? Pitch trim is automatic also on the ground, right?

**hdespres** · 2017-04-15 11:26:51

hdespres
Member
Offline

Registered: 2015-12-02
Posts: 73

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Good morning Eugeny. Thank you for the update.
Installed the R5 version. Trouble with the push back truck... soon as I hit to GO button, park brake releases and truck disappears. Just to let you know.

i5 8600K OC@ 5.0Ghz, 16 GB DDR4-RAM
ASUS ROG STRIX GTX 1070 - X55 Saitek Pro Rhino Stick, X55 Saitek Rhino Throttle
Windows 10 64 Bit - X-plane 11.11 - X-Enviro 1.07 - X-Ivap - XCamera - GHD - EFASS NG

**venni** · 2017-04-15 11:38:27

venni
New member
Offline

Registered: 2015-07-17
Posts: 1

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Edit: hdespres was faster:)

Same problem here with R5

**carlosldc** · 2017-04-15 14:27:10

carlosldc
New member
Offline

From: Rio de Janeiro
Registered: 2017-04-09
Posts: 3

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Same here, when press GO to start Pushback, Parkbreak OFF and disappear the truck. i'm backing to "r4"

Regards,

Carlos.

**JAR** · 2017-04-15 15:05:03

JAR
Admin
Offline

Registered: 2012-02-13
Posts: 394

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

awf757 wrote:

Ok was trying out the bus for XP 11 , nice work.
(have the bus for P3D (FSLABSA320))
Noticed the system level is at a very basic level and was prepared upfront and operated in normal law.
So I looked at this from that perspective and as a dev from the dark site lol, noticed a few things which I wouldn't expect.
- Almost level of at FL100 to accelerate and then start the climb again.
- Overshooting way points in turns by a large margin
- Loosing the flight path and have a mind of it's own (also during a RNAV approach)
- MCDU (FMGS) when programming more airways in sequence not possible
- MCDU (FMGS) when not inserting the way points but programming more in sequence (yellow text) and then insert the FMGS crashes
- APU starting up sequence wrong!
- RNAV approaches no VDEV simulated?
- Love the model and reflection stuff in XP and also the 3d party BSS sounds
- Would prefer to have a few more steps in the display intensity level find it two steps to low...
- Some strange color way point lines blue instead of green with RNAV
- New FL CRZ logic not correct when starting with a sid and a star in the flight plan
- THE MCDU should show the correct current way points and below in the MCDU page but in this bus it stays where is left by the pilot and is static.
- ECAM message no FLEX set is strange and not expected... curious after which software version you modeled this bus.
- Reflections are over done for the display and windows (already discovered the windows one so easy to adjust but what is used for the displays)?
Ok much more to discover and will have a more in depth look...
Hope it's helpful...
André
Cheers,

Great review! Thanks!!!

Sure, FSLABs 320 is the best for today for MSFS/P3D. So, the same autor as PMDG 737. Deep systems, good looking. One problem - it is not for X-Plane.

**JAR** · 2017-04-15 15:06:46

JAR
Admin
Offline

Registered: 2012-02-13
Posts: 394

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

hdespres wrote:

Good morning Eugeny. Thank you for the update.
Installed the R5 version. Trouble with the push back truck... soon as I hit to GO button, park brake releases and truck disappears. Just to let you know.

So, R6 should fix that or .. need just put this file to Custom Avionics instead of old r5 file.

Post's attachments

ground.sec 11.61 kb, 197 downloads since 2017-04-15

**loganfid** · 2017-04-15 19:43:06

loganfid
New member
Offline

Registered: 2017-04-15
Posts: 3

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Great update! I'm having issues when either in take off or in my departure, the navigation will tell me im close to top of decent and will cancel my navigation... any fixes?

**ilankrt** · 2017-04-15 20:35:48

ilankrt
Member
Offline

Registered: 2015-10-20
Posts: 772

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Test flight XP11, XL, A3203r5, UUOB to URRR all systems are working.

Descending with strong tailwinds, I had to use speedbrakes permanently (half) all the way down to 10000 ft.
Before landing ATC ordered a GA. I pushed THR to TOGA and then problems began. Dialing speed 250 kt and 2200 ft altitude as ATC required and although under AP control all things went wrong and I had to land manually..... Who knows about an A320 video about GA ?

**captain orange** · 2017-04-15 21:49:28

captain orange
New member
Offline

Registered: 2017-04-13
Posts: 3

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

thomas_99 well than what would my problem be because I can not manually put in the DEP/ARR airport as it says not found.

**thomas_99** · 2017-04-16 08:02:43

thomas_99
Member
Offline

Registered: 2015-05-04
Posts: 235

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Hi !

captain orange wrote:

thomas_99 well than what would my problem be because I can not manually put in the DEP/ARR airport as it says not found.

First check if you have an installation problem.

- load the plane, use airport "EDNY"
- press "hot start" button
- look at the fmc. you can see your cycle. You should see something like this:

If that's ok (no error, not empty), goto "320_JARDesign\FlightPlans" and make a new text file with name
"EDNYEDDL.txt", containing:

EDNY SID ALAGO Z5 LOKTA UN851 TEDGO UZ210 NOSPA UN857 DIK UN853 ARCKY UZ907 ELDAR T857 BIKMU STAR EDDL

Save it. That's the flight plan.

Load plan:

This should work.

best regards,

**J.A.Romanov** · 2017-04-16 08:20:45

J.A.Romanov
Admin
Offline

Registered: 2015-02-15
Posts: 2,885

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

loganfid wrote:

Great update! I'm having issues when either in take off or in my departure, the navigation will tell me im close to top of decent and will cancel my navigation... any fixes?

Any log.txt?

Please read a FAQ before you post a bug http://support.jardesign.org

**kebs** · 2017-04-16 09:29:50

kebs
Member
Offline

From: Paris
Registered: 2015-09-05
Posts: 65

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Hello
with R6 the align time message disappear
also press enter to pos

**kebs** · 2017-04-16 09:34:57

kebs
Member
Offline

From: Paris
Registered: 2015-09-05
Posts: 65

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

I forgot , also transponder and radio

**JAR** · 2017-04-16 10:45:45

JAR
Admin
Offline

Registered: 2012-02-13
Posts: 394

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

kebs wrote:

I forgot , also transponder and radio

Anyone more have the same?

[ Closed ] a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11) (Page 8 of 11)

Posts: 176 to 200 of 266

176 Reply by J.A.Romanov 2017-04-14 09:43:42

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

177 Reply by colinah 2017-04-14 10:38:08

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

178 Reply by ilankrt 2017-04-14 11:59:05 (edited by ilankrt 2017-04-14 12:00:40)

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

179 Reply by J.A.Romanov 2017-04-14 13:33:10

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

180 Reply by J.A.Romanov 2017-04-14 13:34:26

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

181 Reply by Zmile 2017-04-14 14:25:42 (edited by Zmile 2017-04-14 14:27:13)

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

182 Reply by thomas_99 2017-04-14 14:46:15

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

183 Reply by ilankrt 2017-04-14 16:53:57

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

184 Reply by thomas_99 2017-04-14 17:52:09 (edited by thomas_99 2017-04-14 17:53:25)

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

185 Reply by ilankrt 2017-04-14 21:16:50

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

186 Reply by awf757 2017-04-14 22:41:28 (edited by awf757 2017-04-15 10:00:12)

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

187 Reply by rdrehmer 2017-04-15 02:20:16 (edited by rdrehmer 2017-04-15 02:20:41)

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

188 Reply by hdespres 2017-04-15 11:26:51

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

189 Reply by venni 2017-04-15 11:38:27 (edited by venni 2017-04-15 11:40:40)

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

190 Reply by carlosldc 2017-04-15 14:27:10

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

191 Reply by JAR 2017-04-15 15:05:03

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

192 Reply by JAR 2017-04-15 15:06:46

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

193 Reply by loganfid 2017-04-15 19:43:06

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

194 Reply by ilankrt 2017-04-15 20:35:48

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

195 Reply by captain orange 2017-04-15 21:49:28

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

196 Reply by thomas_99 2017-04-16 08:02:43

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

197 Reply by J.A.Romanov 2017-04-16 08:20:45

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

198 Reply by kebs 2017-04-16 09:29:50

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

199 Reply by kebs 2017-04-16 09:34:57

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

200 Reply by JAR 2017-04-16 10:45:45

Re: a320neo JARDesign ver 3.0r1-6 WIN/MAC 64 bit (X-Plane 11)

Posts: 176 to 200 of 266