1 Topic by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Topic: ver 2.5 beta 1 WIN/MAC 64 bit

First beta, please use it if you really want take part in beta-tests

ver 2.5 beta 1 WIN/MAC 64 bit
So, next 320 improvement.

What new:
+Ground Handling Deluxe plugin (not included) compatible
  (mean what now you should have external pwr avail when GPU connected, fuel panel should come  with fueltank, doors shouls open in auto mode)
+FBW “roll” tuned for low airspeed
(based on reports from real pilots tests)
+ready for Custom 3D soundpacks
(not included, expect from 3th part developers like BLYE SKY STAR)
+ND Weather radar range extended
+new SASL base plugin included


Download link http://jardesign.org/a320/download/inst … V2.5b1.zip

HOW TO INSTALL:
  - be sure, what you use X-Plane 10.36 (stable only, not use betas, please)
  - copy unziped "320neo_JARDesign" folder to ..\X-Plane 10\Aircraft\ folder
  - start X-Plane 64 bit and open a320, activation window is show up
  - enter you serial key (Regcode), click NEXT and reopen aircraft via X-Plane menu
  - activation will work well with both MAC/WIN 64 bit

This is beta version for X-Plane 10 64 bit. "Beta" mean what some may work wrong.

If your activations are over (activation error) - use contact email from official website http://airbus320neo.com/contact/

Please not discuss things what are not in "whats new" list. Please post your opinion direct here. When you post some, please follow some rules like this http://jardesign.org/forum/viewtopic.php?id=861

Please read a FAQ before you post a bug http://support.jardesign.org

2 Reply by WoDi

  • WoDi
  • Member
  • Offline
  • From: Germany
  • Registered: 2015-04-15
  • Posts: 55

Re: ver 2.5 beta 1 WIN/MAC 64 bit

Good job!
After activating tho old problem: crash.

During first flight no problems (with 10.40rc1).
My cruiselevel ist FL370 and no problems to go with normal weight.

Dieter

3 Reply by kotovas

  • kotovas
  • Member
  • Offline
  • Registered: 2015-04-17
  • Posts: 24

Re: ver 2.5 beta 1 WIN/MAC 64 bit

When the cockpit uptade? Like a dron420?

4 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver 2.5 beta 1 WIN/MAC 64 bit

I dont know, need ask Dron this only smile

Please read a FAQ before you post a bug http://support.jardesign.org

5 Reply by kotovas

  • kotovas
  • Member
  • Offline
  • Registered: 2015-04-17
  • Posts: 24

Re: ver 2.5 beta 1 WIN/MAC 64 bit

Dron, when update cockpit?

6 Reply by jiggyb2

  • jiggyb2
  • Member
  • Offline
  • Registered: 2015-04-15
  • Posts: 167

Re: ver 2.5 beta 1 WIN/MAC 64 bit

When it's ready.

He likes to post preview pics on the Facebook group though, that's the best place to see progress.

7 Reply by RITALIN

  • RITALIN
  • New member
  • Offline
  • Registered: 2015-09-06
  • Posts: 1

Re: ver 2.5 beta 1 WIN/MAC 64 bit

Hi everyone,

i'm a real Comercial pilot IFR and Twin Engine Rated, and i've finished the Entry Level Training Course of A320 and i'm aplying for an airline Job in Chile, so i have many points to check about this airplane i'd like to mention for development but i'm not pretty sure if this  is the right thread for that.

Plaese let me know and i'll be happy to help.

Than you all.

8 Reply by dunky31

  • dunky31
  • New member
  • Offline
  • Registered: 2015-04-29
  • Posts: 1

Re: ver 2.5 beta 1 WIN/MAC 64 bit

You are welcome!

9 Reply by ivota

  • ivota
  • Member
  • Offline
  • Registered: 2015-04-13
  • Posts: 77

Re: ver 2.5 beta 1 WIN/MAC 64 bit

Short feedback (Windows10x64, X-Plane 10.40r1).
-Installed and activated ---- > No problem, great.
-FBW “roll” tuned for low airspeed --> I felt better control of aircraft, nice.

Thanks JAR for update.

10 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver 2.5 beta 1 WIN/MAC 64 bit

ivota wrote:

Short feedback (Windows10x64, X-Plane 10.40r1).
-Installed and activated ---- > No problem, great.
-FBW “roll” tuned for low airspeed --> I felt better control of aircraft, nice.

Thanks JAR for update.

Thanks for report!

Please read a FAQ before you post a bug http://support.jardesign.org

11 Reply by zippy77777

  • zippy77777
  • Member
  • Offline
  • Registered: 2015-02-20
  • Posts: 96

Re: ver 2.5 beta 1 WIN/MAC 64 bit

every time i reload this new beta, the whole sim crashes. It only does it with this beta?

Intel i5 3570K, Gigabyte G1 Gaming GTX 970 4GB, 16GB Ram

12 Reply by joni80

  • joni80
  • Member
  • Offline
  • Registered: 2015-06-19
  • Posts: 35

Re: ver 2.5 beta 1 WIN/MAC 64 bit

Hi, I found that I am unable to switch to a ND range of 320nm, is this a bug by chance?

13 Reply by safeflight

  • safeflight
  • Member
  • Offline
  • Registered: 2015-07-05
  • Posts: 6

Re: ver 2.5 beta 1 WIN/MAC 64 bit

Working very good, no crash on Mac using XP10.40r1.

Noticed very stabil behaviour during climb and approach.

14 Reply by rhpa23

  • rhpa23
  • Member
  • Offline
  • Registered: 2015-05-27
  • Posts: 16

Re: ver 2.5 beta 1 WIN/MAC 64 bit

Hello, I'm trying  activate but occur a error: "Invalid hardware code!". I'm following the instructions on .txt file, like the others times.

Could you help me with this, please?

15 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver 2.5 beta 1 WIN/MAC 64 bit

joni80 wrote:

Hi, I found that I am unable to switch to a ND range of 320nm, is this a bug by chance?

ot is normal. 320 NM range not released.

Please read a FAQ before you post a bug http://support.jardesign.org

16 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver 2.5 beta 1 WIN/MAC 64 bit

rhpa23 wrote:

Hello, I'm trying  activate but occur a error: "Invalid hardware code!". I'm following the instructions on .txt file, like the others times.

Could you help me with this, please?

send answer via email!

Please read a FAQ before you post a bug http://support.jardesign.org

17 Reply by Acei (edited by Acei 2015-09-13 10:16:38)

  • Acei
  • Member
  • Offline
  • Registered: 2015-05-26
  • Posts: 128

Re: ver 2.5 beta 1 WIN/MAC 64 bit

Flew EGLL to EIDW.  Noticed the following:

- Plane CTD when loaded a couple of times.  It may have been an issue with my download.  Deleted and downloaded again and it seems ok now.
- On loading, there is a crash sound, the FO says Power Set and the CC announcement comes on that normally happens after the doors are shut.  This is before any power is turned on.
- Power set wasn't announced when accelerating for take off
- Only got sound from ADR switches - no sound for any other switches
- Light above Captains side window doesn't work - sorry, didn't check FO's side

Otherwise, there were no issues.

18 Reply by dron420

  • dron420
  • Developer
  • Offline
  • Registered: 2015-01-23
  • Posts: 129

Re: ver 2.5 beta 1 WIN/MAC 64 bit

jiggyb2 wrote:

When it's ready.

He likes to post preview pics on the Facebook group though, that's the best place to see progress.

You are right. Cockpit is still in development.

19 Reply by james90909

  • james90909
  • Member
  • Offline
  • Registered: 2015-08-23
  • Posts: 23

Re: ver 2.5 beta 1 WIN/MAC 64 bit

An ongoing problem is when you enter a flight level into the FMC this generates points which should be defined by just altitude, not position, BUT the FMC generation of these non-existent geographic waypoints, such as (TC) (TD) distorts the course to be flown to the next geographic waypoint. The only way to get a correct course to the next geographic waypoint is to omit the entry of a flight level into the FMC

20 Reply by TDPlane

  • TDPlane
  • Privileged
  • Offline
  • From: Amsterdam
  • Registered: 2015-01-22
  • Posts: 446

Re: ver 2.5 beta 1 WIN/MAC 64 bit

My first test flight with the A320Neo v2.5beta1 was from KPHL to KATL on the DIRTY approach. FL300 CI 20. Some findings:

- T/C was ± 50 nm off (screenshot)
- ANP was slightly off but still compliant with RNP, no big deal
- Frame rate is fickle; starting off with 40 FPS; near KATL drops to 19 and goes back to 31 for no apparent reason; looking outside into the blue at ALT CRZ I get 160 FPS; with cockpit view the FPS tumbles down to 30
- pitch of nose is a bit hysteric when catching GS or dropping flaps; there's no smooth transition; also when trying to get an altitude restraint, the pitch is weird and not comfy for PAX
- ALT CSTR are not visible in LEGS page or end up with a slightly different number
- not all waypoints are included when choosing the ILS for KATL27R

I'll fly KATL-KMCO tonight. Will let you know.

Post's attachments

Attachment icon a320neo_1.png 3.02 mb, 203 downloads since 2015-09-13 

Sierra 10.13.6 - 4.5 GHz i7 - Retina 5120 x 2880 - 16 GB - Radeon Pro 580 8 GB - X-Plane 11 - Ravcore Javelin - 767 FF - 777 FF - 787 Dreamliner - plugin tester Airbus A350 FF - A320Neo JD - A380 PH - A330 PH - alpha/beta tester A330 JD - CRJ200 - beta tester 747-8i SSG - IXEG 733 - EADT 737-800 v5 - 757 v2 FF - ZIBO 737-800 - SSG Embrear 195 - FF A320

21 Reply by james90909

  • james90909
  • Member
  • Offline
  • Registered: 2015-08-23
  • Posts: 23

Re: ver 2.5 beta 1 WIN/MAC 64 bit

I notice the flap extension/retraction sounds disappeared.

22 Reply by ivota

  • ivota
  • Member
  • Offline
  • Registered: 2015-04-13
  • Posts: 77

Re: ver 2.5 beta 1 WIN/MAC 64 bit

Windows10x64, X-Plane 10.40r1
I found a possible bug in CHECKLIST (Mike).
- BEFORE  TAKEOFF -> when said ENGINE MODE SELECTOR (never stop, loop sound).

p.s
before line up rwy, engine mode selektor was at CRANK positon. I set zo NORMAL, but loop checklist sound (ENGINE MODE SELECTOR, ENGINE MODE SELECTOR, ENGINE MODE SELECTOR...)

I will test again.
that is it for now.

23 Reply by amischkowitz

  • amischkowitz
  • Member
  • Offline
  • Registered: 2015-08-06
  • Posts: 192

Re: ver 2.5 beta 1 WIN/MAC 64 bit

Hi,

test flight with the A320Neo v2.5beta1 from ESGG to LEPA landing 06 R. FL370-390 CI 18. Some remarks:
- Weather radar at different range Ok very good
- T/C was ± 10-15 nm
-Fuel "door" not closed automatically after the departure from the fuel truck (groundhandling deluxe) (I needed to make it with the standard plugin
-the plane follow not always the flight plan (especially when it turns) difference from +- 5 NM
-Pack 1 and 2 (Air Cond) not automatically shut in auto (on)
-no possibility to add speed constraint into the FMC for the STAR and also for the selected speed

That's all for now

Thanks for your work

24 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver 2.5 beta 1 WIN/MAC 64 bit

thanks for your reports. workon fix

Please read a FAQ before you post a bug http://support.jardesign.org

25 Reply by koke50

  • koke50
  • New member
  • Offline
  • Registered: 2015-04-04
  • Posts: 2

Re: ver 2.5 beta 1 WIN/MAC 64 bit

RNAV procedures don't work yet