[ Closed ] ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11 (Page 12 of 14)

Hello to everyone,

I just got my updated serial so I decided to do a quick test flight with the 3.0 beta 6 version (it reads V.30B6 on the plate). I did the following:
Normal start up (checklists, procedures as usual) with one exception: I didn't enter any waypoints (or SID's/STAR's), because I wanted to fly a few circuits with touch-and-go's. Instead I entered "EDDL/EDDL" as departure/destination.

Takeoff and flying worked fine as usual (I was just missing the V-speed callouts, but that was maybe because I had Flight Director off or maybe because I hadn't entered a flightplan). But after landing, I engaged TOGA (because I wanted to do a touch and go) - the plane didn't like this and gave me a constant "WARNING: a320 systems (SASL) plugin error occur". Also, the airspeed indicator was inoperable after that [it just stopped updating]. (that was the only critical issue, everything else was a-ok)

Log.txt is full of this error: [SASL ERROR] Error updating avionics: [string "u//mcdu_fpln.sec"]:0: attempt to index a nil value

I believe the error could be because I only entered minimal data into the MCDU.

Full Log.txt is attached.

Edit: Okay I tried again with an arrival programmed into the MCDU and the issue disappeared.

Hi I'm having trouble to get the a320 to follow the flight path will just fly in circles or way off course any help would be great

So, as Laminars just rework ILS "dot" datarefs and system, we prepare and upload beta 7. Please inform me if you have any troubles with ILS approach.

Important question. I know there is download limit with each serial. How about updates? Will they consume these "download points" or how thing actually works?

Also will JDA320 still try to find navdata from Custom Data folder before _navdata located inside aircraft package?

Also I found bug. I was flying from EDDF to LIPZ. Total distance 417nm. I tried to set FL340 but it automaticly just got into FL330 and there was text "new crz lvl" I wasn't able to get it higher than FL330

Everything else was set and wasn't able to change it. Before this v7 beta I haven't had any problems.

You want to be a sim pilot you should already know that flying in east direction airways are always at odd altitudes !!

Is there a way to take a normal size picture of the plane for the XP11 menu icons? The resulting icon is always too small.
Have a look at this: http://developer.x-plane.com/2017/03/if … too-small/
Any workaround? Thanks.

This is not bug. Real aircraft fork with the same way on lastest MCDU. Aircraft know DEP/ARR dist and trying  to build vertical profile - to get TOC and TOD. If your CRZ too hight for this distance - acf try to decrease CRZ FL to make vert profile normal.

As example if your lateral dist like 20 NM and you enter FL390, acf will recalculate it.

Anyway, you may turn On vertical profile using MCDU MENU and look at profile situation.

After PB17 I can't engage autopilot of  A320 V3.0B7. Anybody same problem?

Test flight A320 b4 / XL 1.2r3 / XP11 b17 !

First time after a long period a flight that I could end at the gate. Nearly a perfect flight (see P3).
1. Working perfect with X-Life ATC
2. Seems to be very good balanced during TO, Cruise and also during descent and landing with front winds 16kn (no swinging as in the past in same situation).
3. After landing at 150kn speedbrakes didn't deployed a n d reverse thrust didn't function after activation. (Is it a failure or result of landing speed etc. ?)

Hi !

Just made a flight from EDDL to EDNY.

Works so far, but at the end, the plane just does not turn to the airport, but to the opposite
direction while ILS was engaged and working.....

I had the same effect yesterday just flying around eddl and trying to make an ILS landing....

anyone else ?

best regards,

I checked the dataref for AP1. It's the same in 330 and 320. In 330 it works for me. But in 320 the dataref value doesn't switch from 0 to 1.