101 Reply by flightime56

  • flightime56
  • Privileged
  • Offline
  • Registered: 2015-04-02
  • Posts: 74

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

A320 v3.0b3

Update on my last notes (no73).

Flew EGCC - EDDH, engines did shut down correctly...  annoying airbrake only flipped up once.

Had a lot of problems setting up the EGCC SID and certainly the EDDH STAR in RIBSO (runway ILS23 - RIBS4A - No Via)  I kept getting "CL" which would not CLR? to join up the STAR to the flightplan...  Only way to program the MCDU was to just use the waypoints (fixes) as DEP or ARR routes to each of the runways.

EXT PWR was on the whole route?

SD

102 Reply by Dvilssaw

  • Dvilssaw
  • Member
  • Offline
  • Registered: 2016-12-21
  • Posts: 7

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

hdespres wrote:

Just noticed QNH on the FMS adjustment knob is not equal to the MFD value???


Yep, same here, happened yesterday when switching between 0990-0991-0992mbar  i got a different reading between mfd and the mcdu

BR

103 Reply by ifixrjs

  • ifixrjs
  • New member
  • Offline
  • Registered: 2016-10-13
  • Posts: 1

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Latest beta update to XP11 broke the a320.  Engines will not start.  Seemingly no ignition, also start valves appear stuck open once engaged, cutting off apu bleed is the only way to stop the start sequence.

Using a320 V3 B3, latest XP11 install.

104 Reply by rsvette12

  • rsvette12
  • Member
  • Offline
  • Registered: 2016-12-24
  • Posts: 35

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Thanks for heads up think i will pass dont want to mess up Neo

105 Reply by Totti

  • Totti
  • Member
  • Offline
  • Registered: 2016-12-25
  • Posts: 23

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

After updating I can't start engine one anymore. It seems, something is blocking fuel flow. But I can't find the error.

106 Reply by GaelMebiame

  • GaelMebiame
  • Member
  • Offline
  • Registered: 2015-06-21
  • Posts: 7

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

I confirm the preceeding post, engines not starting with A320 in X-plane 11 B12.

Regards

107 Reply by ScottFDNY

  • ScottFDNY
  • Member
  • Offline
  • Registered: 2017-02-24
  • Posts: 7

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Updated the xplane 11 beta today and now the a320 engines do not start everything else seems to be ok but when I pushback and go to start they seem to start but n1 only goes to 1.3 and nothing else just wondering if anyone else had the same problem

108 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Confirm. Laminars broke something inside beta 12 one more time. FUCK! Just a FUCK!

Please read a FAQ before you post a bug http://support.jardesign.org

109 Reply by hdespres

  • hdespres
  • hdespres
  • Member
  • Offline
  • Registered: 2015-12-02
  • Posts: 73

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

LR need to fix this not you... FF aircraft have same problems

i5 8600K OC@ 5.0Ghz, 16 GB DDR4-RAM
ASUS ROG STRIX GTX 1070 - X55 Saitek Pro Rhino Stick, X55 Saitek Rhino Throttle
Windows 10 64 Bit - X-plane 11.11 - X-Enviro 1.07 - X-Ivap - XCamera - GHD - EFASS NG

110 Reply by Jonesyg

  • Jonesyg
  • New member
  • Offline
  • Registered: 2016-02-19
  • Posts: 3

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Same problem, A320 engines wont start and tried other aircraft and similar strange issues with beta 12

111 Reply by rsvette12 (edited by rsvette12 2017-02-24 19:27:28)

  • rsvette12
  • Member
  • Offline
  • Registered: 2016-12-24
  • Posts: 35

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

F#$K   J.A. lol   good one - I will stay where I am at XP B11

112 Reply by lrpru29 (edited by lrpru29 2017-02-24 19:29:52)

  • lrpru29
  • Member
  • Offline
  • From: Usa
  • Registered: 2016-07-11
  • Posts: 11

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Same problem that "ScottFDNY" engines in N1 do not go from 1.1%
In EGT  5º
In N2 28.7%
In FF 0
Please solve problem

Womans in your town

113 Reply by TexTwil

  • TexTwil
  • Member
  • Offline
  • Registered: 2017-02-12
  • Posts: 9

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

J.A.Romanov wrote:

Confirm. Laminars broke something inside beta 12 one more time. FUCK! Just a FUCK!

No worries, we all know that this is beta software (both a320 and xp).
Is that something you will have to fix or is the problem on x plane side?

cheers

XP11 beta 13,  A320 3b4, Windows 10, GTX 1070, Intel Core i5-6600K @ 4.3GHz

114 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

If Laminars start to rework engines system - this is very expected pizdec, and this  happen now. Ok, will try to understand a reason tomorrow. Anyway, sorry, dear pilots about this troubles. Sure, this is beta stage and everything may happen.

Please read a FAQ before you post a bug http://support.jardesign.org

115 Reply by hdespres

  • hdespres
  • hdespres
  • Member
  • Offline
  • Registered: 2015-12-02
  • Posts: 73

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Have a good night.. get some rest. Cheers

i5 8600K OC@ 5.0Ghz, 16 GB DDR4-RAM
ASUS ROG STRIX GTX 1070 - X55 Saitek Pro Rhino Stick, X55 Saitek Rhino Throttle
Windows 10 64 Bit - X-plane 11.11 - X-Enviro 1.07 - X-Ivap - XCamera - GHD - EFASS NG

116 Reply by GaelMebiame

  • GaelMebiame
  • Member
  • Offline
  • Registered: 2015-06-21
  • Posts: 7

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Don't worry, J.A., Beta is beta I'm sure in this moment of tranquility everything will be sorted! Goodluck!

Goodnight everyone!

Regards

117 Reply by vschwarz504

  • vschwarz504
  • Member
  • Offline
  • Registered: 2016-04-22
  • Posts: 11

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Be patient ...... yes its a shame with this never ending  betas of laminar.:-)

But I fly on xp10 with 2.7R1 Really good. thx.

regards

118 Reply by cfguthrie

  • cfguthrie
  • New member
  • Offline
  • Registered: 2017-02-24
  • Posts: 1

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Just so you know! I updated both the A320 and the A330.  The A330 works fine in X-plane 11 PB12.  This one has problems with the engines or Hydro.  I tried to open flaps with default keyboard #2 (would not open, just kept saying flaps "0").  I tried using Key #1, (Nothing happened period.  Keyboard key number #1 did nothing.  This started with PB12..

Regards,

119 Reply by Robert Johnson

  • Robert Johnson
  • New member
  • Offline
  • Registered: 2017-02-25
  • Posts: 3

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Updated A320 to version 3.0 beta Feb-23-17. The A320 worked perfect. Today Feb-24-17 XP11 was updated Ver 12. Cannot Start Engines Cold and dark or Hot. Engines reach about 28% then freeze. I have to restart Xp11 and try again. But no success.

120 Reply by WoDi

  • WoDi
  • Member
  • Offline
  • From: Germany
  • Registered: 2015-04-15
  • Posts: 55

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Also here.
After beta 12 I can´t start engines. It sounds "starting engine one" but nothing goes on.

Regards

121 Reply by philgdep

  • philgdep
  • New member
  • Offline
  • Registered: 2017-02-25
  • Posts: 3

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

I have a problem with the A320 B3 in PB11. When adding fuel with the fuel truck, the sim freeze for like 2,3 sec each time I press the 'up' arrow. It's quite annoying if need to put 8K fuel... Didn't saw other complaints about it. Does someone have the same issue?

122 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

XP11beta12 issue fixed. Please redownload a320 to get beta4

Please read a FAQ before you post a bug http://support.jardesign.org

123 Reply by kebs

  • kebs
  • Member
  • Offline
  • From: Paris
  • Registered: 2015-09-05
  • Posts: 65

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Thanks a lot

124 Reply by siege00

  • siege00
  • New member
  • Offline
  • Registered: 2017-02-13
  • Posts: 2

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

Thank you much for the quick update!  Much appreciated.

125 Reply by WoDi (edited by WoDi 2017-02-25 10:52:20)

  • WoDi
  • Member
  • Offline
  • From: Germany
  • Registered: 2015-04-15
  • Posts: 55

Re: ver.3.0 beta 2,3,4,5,6,7 for X-Plane 11

b4
SASL error: [SASL ERROR] Error updating avionics: [string "u//mcdu_fpln.sec"]:0: attempt to index a nil value


Edit: A new flightplan and the error was gone.