76 Reply by FerDiaz

  • FerDiaz
  • Member
  • Offline
  • Registered: 2018-04-09
  • Posts: 19

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

J.A.Romanov wrote:

Sad about Skype, but anyway - to support this issue - need to read Log.txt file saved just after you try "Set TCA On". Sure, you may attach it here or send it to the Skype chat. Skype chat is preferable, cause this board is a public place and anyone may get some information about your computer from Log.txt file.

Log.txt file sent by Skype as requested.
Thanks

77 Reply by FerDiaz

  • FerDiaz
  • Member
  • Offline
  • Registered: 2018-04-09
  • Posts: 19

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

J.A.Romanov wrote:

Sad about Skype, but anyway - to support this issue - need to read Log.txt file saved just after you try "Set TCA On". Sure, you may attach it here or send it to the Skype chat. Skype chat is preferable, cause this board is a public place and anyone may get some information about your computer from Log.txt file.

Mr. Romanov,
Thanks for the help and support in Skype Chat.
It was very useful and the problem was solved.
Thanks again

78 Reply by ukflyer (edited by ukflyer 2021-12-21 14:25:59)

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

how come there is no thrust mode showing on the ECAM like in this picture

http://jardesign.org/forum/img/m/1910/t/p1fnem3b7s1lhhsqsbt217veevc3.jpg

79 Reply by ukflyer (edited by ukflyer 2021-12-21 17:07:17)

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

should the plane be banking 30 degrees at 30,000 feet, seems too much

80 Reply by ukflyer

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

can we have better cockpit textures the current ones are not very realistic

81 Reply by ukflyer

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

any possibility to add librain as an option to a future update?

82 Reply by ukflyer (edited by ukflyer 2021-12-24 19:38:33)

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

autopilot is quite unstable in pitch when accelerating to new selected/managed speeds, could this be smoothed out?

83 Reply by ukflyer

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

unrealistic rate of climb (over 10,000) when selecting lower speeds

84 Reply by ukflyer (edited by ukflyer 2021-12-28 10:16:43)

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

.

85 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

ukflyer wrote:

unrealistic rate of climb (over 10,000) when selecting lower speeds

Sadly - no details in your post. Please explain some.
What (lower) speed was selected? What was the climb Rate? What GW and CG was?
What mode (FMA) you fly in this moment? What "realistic" Climb Rate should be in this situation
and (if possible) - link to docs where you take "realistic" data.

Please read a FAQ before you post a bug http://support.jardesign.org

86 Reply by ukflyer (edited by ukflyer 2021-12-28 12:15:53)

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

J.A.Romanov wrote:
ukflyer wrote:

unrealistic rate of climb (over 10,000) when selecting lower speeds

Sadly - no details in your post. Please explain some.
What (lower) speed was selected? What was the climb Rate? What GW and CG was?
What mode (FMA) you fly in this moment? What "realistic" Climb Rate should be in this situation
and (if possible) - link to docs where you take "realistic" data.

Climbing while in managed speed, then change it to selected speed and decrease it by 30 kts or so.
GW 55,850 kgs. Screenshot shows 6,400 but i've seen greater. Speed and altitude changes should be smooth and not huge in case of crew and their tolleys big_smile

BTW i really like this product, best Airbus for x-plane smile

http://jardesign.org/forum/img/m/1910/t/p1fo0453a715pc1voc1i266901etn3.jpg

Edit: this one's greater than 6,400...off the scale!

http://jardesign.org/forum/img/m/1910/t/p1fo0fe6huumm1d673r1cj4s5b3.jpg

87 Reply by ukflyer (edited by ukflyer 2021-12-28 09:03:24)

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Is there a way to disable the tooltip when in MCP MANIP STYLE 1?

88 Reply by ukflyer (edited by ukflyer 2021-12-28 14:00:05)

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

.

89 Reply by ukflyer

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

The aircraft doesn't seem to want to accelerate at CDU selected altitude after thrust reduction, do you also have this? There are no speed constraints at waypoint GM..

http://jardesign.org/forum/img/m/1910/t/p1fo0f83ee1t1p6k10j5oec9v3.jpg

http://jardesign.org/forum/img/m/1910/t/p1fo0f83eesad1t9c1ja71p4g1bbo4.jpg

90 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

ukflyer wrote:
J.A.Romanov wrote:
ukflyer wrote:

unrealistic rate of climb (over 10,000) when selecting lower speeds

Sadly - no details in your post. Please explain some.
What (lower) speed was selected? What was the climb Rate? What GW and CG was?
What mode (FMA) you fly in this moment? What "realistic" Climb Rate should be in this situation
and (if possible) - link to docs where you take "realistic" data.

Climbing while in managed speed, then change it to selected speed and decrease it by 30 kts or so.
GW 55,850 kgs. Screenshot shows 6,400 but i've seen greater. Speed and altitude changes should be smooth and not huge in case of crew and their tolleys big_smile

When acf fly with "hold speed with constant thrust" (like CLB mode) - and decrease target airspeed - you will get more VS.

Please read a FAQ before you post a bug http://support.jardesign.org

91 Reply by ukflyer (edited by ukflyer 2021-12-29 09:04:58)

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

J.A.Romanov wrote:
ukflyer wrote:
J.A.Romanov wrote:

Sadly - no details in your post. Please explain some.
What (lower) speed was selected? What was the climb Rate? What GW and CG was?
What mode (FMA) you fly in this moment? What "realistic" Climb Rate should be in this situation
and (if possible) - link to docs where you take "realistic" data.

Climbing while in managed speed, then change it to selected speed and decrease it by 30 kts or so.
GW 55,850 kgs. Screenshot shows 6,400 but i've seen greater. Speed and altitude changes should be smooth and not huge in case of crew and their tolleys big_smile

When acf fly with "hold speed with constant thrust" (like CLB mode) - and decrease target airspeed - you will get more VS.


ok thank you, seems odd that the plane will want to climb that fast!

Is it normal for the plane to hold 160 kts on departure when it should be accelerating at acceleration altitude? I see in youtube videos that it should be going faster...

92 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

ukflyer wrote:

ok thank you, seems odd that the plane will want to climb that fast!

Is it normal for the plane to hold 160 kts on departure when it should be accelerating at acceleration altitude? I see in youtube videos that it should be going faster...

First of all, need to determinate where from this issue come. If you a well-qualified airbus/sim pilot and are you sure that everything that you do - right, please contact me skype j.a.romanov - we will do flight together and will see what happen wrong. But yes, you need also check another kind of issue on your side, like conflict with some other plugin what you have installed and use in the same time, or (excuse me) wrong pilot operations.

Please read a FAQ before you post a bug http://support.jardesign.org

93 Reply by ukflyer

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

thanks for the offer, just by using toliss and watching youtube i notice some differences, but not sure if i'm programming the CDU correctly. Normally there is an acceleration at the acceleration altitude but don't see this in your airbus smile

94 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

ukflyer wrote:

thanks for the offer, just by using toliss and watching youtube i notice some differences, but not sure if i'm programming the CDU correctly. Normally there is an acceleration at the acceleration altitude but don't see this in your airbus smile

So, you want to say - aircraft flying V2 speed all the time up to 10000?

No more answers for you, sorry - just offer to make test flight to see how you operate it.

Please read a FAQ before you post a bug http://support.jardesign.org

95 Reply by ukflyer (edited by ukflyer 2022-01-12 21:45:33)

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

hmm seems to be on certain SIDs, EGKK  RWY 26L BOGNA 1X for example, KKW06 first waypoint says MAX 220 IAS but CDU is putting in the 160 kts speed restriction. I also did a departure from LFSB where the 160kts didn't appear and it accelerated as normal. Maybe i will do more testing!

96 Reply by ukflyer

  • ukflyer
  • Member
  • Offline
  • Registered: 2015-12-28
  • Posts: 20

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

please could pfd brightness switch be fixed in next version? thanks

97 Reply by PeterRo.

  • PeterRo.
  • New member
  • Offline
  • Registered: 2022-02-23
  • Posts: 1

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Hallo Jar-Team,
we have been waiting for a new update for the A320 for over a year now and I am eager like a bow for the update.
Is there now a realeas date or a prospect of a reales that you can give us as a Comunity ?
Many greetings
Peter

98 Reply by yasinouadria

  • yasinouadria
  • Member
  • Offline
  • Registered: 2022-03-13
  • Posts: 5

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Hey,
when will we be able to use Plane .55r2 ?
Because it crashes for me right on loading back to Desktop. I'm very sad since I paid lots of money for this. Am I able to have a refund if it does not work ?
Greetings smile

99 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

yasinouadria wrote:

Hey,
when will we be able to use Plane .55r2 ?
Because it crashes for me right on loading back to Desktop. I'm very sad since I paid lots of money for this. Am I able to have a refund if it does not work ?
Greetings smile

Actual version 3.8 work well with 11.41 and 11.55

If you have crash just after loading - please www.support.jardesign.org with Log.txt file saved just after crash happen - we will check and inform you about a reason.

Please read a FAQ before you post a bug http://support.jardesign.org

100 Reply by yasinouadria (edited by yasinouadria 2022-03-15 21:57:49)

  • yasinouadria
  • Member
  • Offline
  • Registered: 2022-03-13
  • Posts: 5

Re: JD320 Airliner ver 3.8 WIN/MAC 64 bit (X-Plane 11.50/11.41)

Hey,
it finally worked thanks smile Iam pretty satisfied with the Product unfortunately. It just needs some love. For example the BSS Soundpack is very good.