1

Topic: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

ver 2.7 WIN/MAC 64 bit

http://jardesign.org/forum/img/m/22/t/p1av7lhv3a1acm9uvoie396ps33.png

WHAT NEW:

+ MAC OS Sierra compatible
+ New PW1100G Engines 3D model included (need to select by MCDU MENU)
+ Pause at TOD added (MCDU MENU Page 2)
+ Possible to unlock and then to open cockpit door
+ New cabin ("Sky interior") lighting system
+ New cockpit "Dark cockpit" lighting system (please use "Dark cockpit" option by MCDU MENU)
+ New cockpit manipulator system "mouse wheel control" (need to select by MCDU MENU)
+ New ground equipment set, include new lighting system
+ Working sunshields
+ Cockpit textures and details improved
+ Cockpit Integ.light/light system improved
+ New cockpit and cabin windows set
+ Visual Ice detector added, include icing effect
+ Few bugs fixed
+ Some PFD/ND details changes
+ Wipers operation effect and some rain improvements added
+ New cockpit “reflecting” glass effect added
+ New cabin windows textures added and fixed issue with “missing strobe glass” for cabin view
+ Fixed wrong left wiper handle orientation
+ Fixed wrong “Cold & Dark” Ground power and battery voltage indication
+ New controls for door switch and trimmer handle added
+ Possibility to control Flaps and Speed brake lever by mouse added
+ Some issues with wheel mouse control fixed
+ New ground Handling
+ Landing Gear tuned

HOW TO INSTALL:
  - be sure, that you use X-Plane 10.50 or 10.51 (64 bit only, MAC OS Yosemite-to-Sierra or Windows 7-8-10)
  - copy unziped "320neo_JARDesign" folder to ..\X-Plane 10\Aircraft\ folder
    (be sure, what you are not use nonEnglish symbols in aircraft installation path)
  - start X-Plane 64 bit and open a320, activation window is going to show up
  - enter your serial key (Regcode), click NEXT and after a successful activation reopen aircraft via X-Plane menu
  - activation works well with both MAC/WIN 64 bit

FMS NAVDATA Update:
v.2.7 use NavData from ../X-PLANE 10/Custom Data/GNS430/navdata/ folder
If you need update your cycle, please use Aerosoft/Navigraph
- “a320/330 Native format” or (the same in fact)
- “XPLANE_GNS430_777WORLDLINER_FF757PROF_NATIVE”
and put new cycle to ..X-PLANE 10/Custom Data/GNS430/navdata/ folder

DOWNLOAD:
http://jardesign.org/a320/download/install/JD320.zip

New PaintKit (PW engines included):
http://jardesign.org/a320/download/pain … intkit.zip

if you use BSS sound pack, please delete exist sound3d folder and add sound3d folder from BSS. It can be named sound3d-1 or you can rename it to sound3d as you like.

Please read a FAQ before you post a bug http://support.jardesign.org

2

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

Some fixes here (please apply it you really have this issues):

If two ECAM brightness knobs are inoperate - please download light.sec file and put it to /Custom Avionics/ folder instead of old file.

Post's attachments

Attachment icon light.sec 14.47 kb, 1095 downloads since 2016-10-31 

Please read a FAQ before you post a bug http://support.jardesign.org

3

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

For the moment I went back to your beta 2.7 b3

-I have the impression that the beautiful glass effect on the ND, PFD and ecam is gone... that was great and make the aircraft more real
-I have also problem with installation of BSS soundpack 3.0
-the digits on the barometric settings are still skipping

I will wait until next updates or corrections

4

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

amischkowitz wrote:

For the moment I went back to your beta 2.7 b3

-I have the impression that the beautiful glass effect on the ND, PFD and ecam is gone... that was great and make the aircraft more real
-I have also problem with installation of BSS soundpack 3.0
-the digits on the barometric settings are still skipping

I will wait until next updates or corrections

- you may use small clickzone to control mirror effect on PFD/ND
- you may delete sound3D folder and install sound3D folder from BSS
- please explain "-the digits on the barometric settings are still skipping"? What wrong exactly?

Please read a FAQ before you post a bug http://support.jardesign.org

5

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

It's easy to get around the reading on the barometric pressure skipping.  Eugeny - it's skipping a digit every now and then in hPA when increasing or decreasing.  e.g. skip from 1021 to 1023 - the numbers it skips can be random.

You can change to inHg and adjust there and then switch back to hPA and it should read correctly.  Far from a critical bug.

6 (edited by tinchocba 2016-10-30 18:31:41)

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

amischkowitz wrote:

For the moment I went back to your beta 2.7 b3

-I have the impression that the beautiful glass effect on the ND, PFD and ecam is gone... that was great and make the aircraft more real

Yes, it's gone. You are right. Now is the old effect.

7

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

tinchocba wrote:

Yes, it's gone. You are right. Now is the old effect.


Still there if you click centre just above the captain's displays.  It was on by default in B3, now off by default as it was previously.

8

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

Acei wrote:

It's easy to get around the reading on the barometric pressure skipping.  Eugeny - it's skipping a digit every now and then in hPA when increasing or decreasing.  e.g. skip from 1021 to 1023 - the numbers it skips can be random.

You can change to inHg and adjust there and then switch back to hPA and it should read correctly.  Far from a critical bug.

I will check and fix hPa settings issue.

9

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

J.A.Romanov wrote:
amischkowitz wrote:

For the moment I went back to your beta 2.7 b3

-I have the impression that the beautiful glass effect on the ND, PFD and ecam is gone... that was great and make the aircraft more real
-I have also problem with installation of BSS soundpack 3.0
-the digits on the barometric settings are still skipping

I will wait until next updates or corrections

- you may use small clickzone to control mirror effect on PFD/ND
- you may delete sound3D folder and install sound3D folder from BSS
- please explain "-the digits on the barometric settings are still skipping"? What wrong exactly?


Ok, thanks. I tried but no results sad It's not so clear . Where do I have to click ? On which zone ?
For me personally, on the beta it was great, seing right now the glass effect

For BSS, normally according the instructions we don't have to delete anything. Just copy the folder 3d 1 from BSS in the plugins folders. With the beta 2.7 b3 it's ok

for skipping on the barometric setting we have for example 1004 Hpa and then it goes to 1006 (no 1005) and so on...

Thanks

10

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

Acei wrote:
tinchocba wrote:

Yes, it's gone. You are right. Now is the old effect.

Still there if you click centre just above the captain's displays.  It was on by default in B3, now off by default as it was previously.

Excellent!! Thank you dude.

11

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

amischkowitz wrote:

Ok, thanks. I tried but no results sad It's not so clear . Where do I have to click ? On which zone ?
For me personally, on the beta it was great, seing right now the glass effect

Thanks

Top zone between PFD and ND.

https://k60.kn3.net/1/C/5/9/A/4/913.png

12

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

Ok, thanks a lot smile

I didn't know that. It's perfect for the glass effect. For me I would like even a little more effect on the PFD and ND but that's personal gust.

But I notice that the two ECAM brightness knobs are inoperating. That's sad.

thanks for all

13 (edited by joomie 2016-10-30 19:26:34)

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

amischkowitz wrote:
J.A.Romanov wrote:
amischkowitz wrote:

For the moment I went back to your beta 2.7 b3

-I have the impression that the beautiful glass effect on the ND, PFD and ecam is gone... that was great and make the aircraft more real
-I have also problem with installation of BSS soundpack 3.0
-the digits on the barometric settings are still skipping

I will wait until next updates or corrections

- you may use small clickzone to control mirror effect on PFD/ND
- you may delete sound3D folder and install sound3D folder from BSS
- please explain "-the digits on the barometric settings are still skipping"? What wrong exactly?


Ok, thanks. I tried but no results sad It's not so clear . Where do I have to click ? On which zone ?
For me personally, on the beta it was great, seing right now the glass effect

For BSS, normally according the instructions we don't have to delete anything. Just copy the folder 3d 1 from BSS in the plugins folders. With the beta 2.7 b3 it's ok

for skipping on the barometric setting we have for example 1004 Hpa and then it goes to 1006 (no 1005) and so on...

Thanks

Same here. BSS sound pack v3 cannot be installed.
man switches, the engines, APU etc. have no sound.
I just copied the folder "sound3d-1" from BSS into "A320/plugins/" as it is described in the manual of BSS.

SYSTEM: X-Plane 11.00pb9, Win 10 (64bit), Intel Core i7 6700K@4.5 GHz, NVIDIA GeForce GTX 1080 8 GB GDDR5X, 32GB RAM, 1.25 TB SSD, SAMSUNG SUHD 55'' TV@3840x2160px, TrackIR5; PLUGINS/ TOOLS: FS Global Real Weather, SkyMaxxPro v4.1, Real Weather Connector, Gnd Handl. Deluxe, X-Camera, NDP Charts, Navigraph AIRAC; A/C: JARDesign: A320neo & A330

14 (edited by Homer.Simpson 2016-10-30 21:15:25)

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

To install the bss sound packed If understand correctly you have to remove the "sound3d" (backup it First) folder from A320/plugins/. Then put the "sound3d-1" from the bss soundpackage into the A320/Plugins folder and after that rename it to "sound3d".

15

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

Ok, BSS v3 works now.
Another question. Maybe someone knows a solution. I like the comfort mode (using scroll wheel of mouse to control knobs/ switches) but sometimes I miss the click zone and begin to zoom. Is there a way to disable the zooming via scroll wheel and just use the wheel to control the switches?

SYSTEM: X-Plane 11.00pb9, Win 10 (64bit), Intel Core i7 6700K@4.5 GHz, NVIDIA GeForce GTX 1080 8 GB GDDR5X, 32GB RAM, 1.25 TB SSD, SAMSUNG SUHD 55'' TV@3840x2160px, TrackIR5; PLUGINS/ TOOLS: FS Global Real Weather, SkyMaxxPro v4.1, Real Weather Connector, Gnd Handl. Deluxe, X-Camera, NDP Charts, Navigraph AIRAC; A/C: JARDesign: A320neo & A330

16 (edited by laohu314 2016-10-31 05:32:17)

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

On my first flight with v2.7r1 I noticed that Descent (DES) mode and Open Descent (OP DES) mode seem to be swapped. In DES Mode the aircraft dips down at full speed VVS -3500fpm and more (leading to uncontrollable over speed), while in OP DES Mode the VVS seems more normal.
In previous versions this was reverse, i.e. OP DES Mode generated unrealistically high VVS

iMac5K 27” (2015), i7 4GHz, OSX 10.14.6, 32GB, AMD M395X 4096MB, Saitek X52, TPM, Radio, Switch & Multi, TM MFD, XP11.35r1, FFA320v0.11.2-2305, ToLiSs A319 v1.3.3, JDA320 v3.4r1, JDA330 v3.2r1, XL v4_250719, FM v2.6r2,  GndHdg v.4.010719, Air Plugin v4.8.3,  FWL 2.7.19, 3jFPS-wizard, PI v2.73.06, NOAA v2.4.4, XSPs v2.75, XCL v1.37, BPB v0.47, SAM 1.1.0

17 (edited by laohu314 2016-10-31 06:23:02)

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

Homer.Simpson wrote:

To install the bss sound packed If understand correctly you have to remove the "sound3d" (backup it First) folder from A320/plugins/. Then put the "sound3d-1" from the bss soundpackage into the A320/Plugins folder and after that rename it to "sound3d".

This is slightly confusing. It means that the BSS install instructions are wrong!?!
I'm trusting JAR on this so I'll try it this way...
Wow

iMac5K 27” (2015), i7 4GHz, OSX 10.14.6, 32GB, AMD M395X 4096MB, Saitek X52, TPM, Radio, Switch & Multi, TM MFD, XP11.35r1, FFA320v0.11.2-2305, ToLiSs A319 v1.3.3, JDA320 v3.4r1, JDA330 v3.2r1, XL v4_250719, FM v2.6r2,  GndHdg v.4.010719, Air Plugin v4.8.3,  FWL 2.7.19, 3jFPS-wizard, PI v2.73.06, NOAA v2.4.4, XSPs v2.75, XCL v1.37, BPB v0.47, SAM 1.1.0

18

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

amischkowitz wrote:

Ok, thanks a lot smile

I didn't know that. It's perfect for the glass effect. For me I would like even a little more effect on the PFD and ND but that's personal gust.

But I notice that the two ECAM brightness knobs are inoperating. That's sad.

thanks for all

If so, please download this file and put it to /Custom Avionics/ folder instead of old file.

Please read a FAQ before you post a bug http://support.jardesign.org

19

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

laohu314 wrote:
Homer.Simpson wrote:

To install the bss sound packed If understand correctly you have to remove the "sound3d" (backup it First) folder from A320/plugins/. Then put the "sound3d-1" from the bss soundpackage into the A320/Plugins folder and after that rename it to "sound3d".

This is slightly confusing. It means that the BSS install instructions are wrong!?!
I'm trusting JAR on this so I'll try it this way...
Wow

BSS instruction was done on beta stage (too early).

Please read a FAQ before you post a bug http://support.jardesign.org

20

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

Hi and congratulation for this great plane,

I'v just downloaded A320 V2.7 R1 and I unfortunately the digital numeric keyboard stays inactive.
Therefore I can not easily access to mcdu, etc...
I had not that problem with a320 V2.7 B3.
And the numeric keyboard still works well if I load the a330 V1.3 R3. Strange.

Thanks for help please
jcmic

21 (edited by Homer.Simpson 2016-10-31 12:08:24)

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

Do you mean the quick views you choose with the numpad of the keyboard?

To restore that option do following steps:
Quit X-Plane
Download v2.7b3 (if you still have that version on your computer you don't need to redownload it)
Find the "a320neo_prefs.txt" in the A320 root folder.
Copy that file
Then replace the file found in the v2.7 folder with the copied one.
Start X-Plane and load the A320 v2.7 and you should have the quick views back.

22

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

Ok, thank you very much Homer.
Now it is working fine, and file a320neo_prefs.txt was the actually the problem.
Curious that this file doesn't take into account the numpad in the V2.7 R1 update, and that no one else seems to have faced this problem.

Good fly
jcmic

23

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

BSS Sound with 2.7r1

Settings: Sound 3D Volumen
Master internal does not work!
There is no difference between 0 to 100 percent

The engines are too loud in the cockpit.

24

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

Activation error when I try to activate.

25

Re: a320neo JARDesign ver 2.7r1 WIN/MAC 64 bit (X-Plane 10)

You may try this: http://www.jardesign.org/ticket/kb/faq.php?cid=1

If that doesn't work use the contact form: http://jardesign.org/ticket/open.php and don't forget to fill in your serial