526 Reply by Metallist (edited by Metallist 2016-05-18 19:58:46)

  • Metallist
  • Member
  • Offline
  • From: ULLI
  • Registered: 2016-01-17
  • Posts: 38

Re: X-Life ver 1.0 (rc1, r1, ++)

Metallist wrote:
captbullett wrote:
Metallist wrote:

URSS-URRR after permission for taxiing CTD log and dump file


good day
you need to up date and only replace the  .xpl  files ...
Brian

Thank you, just now after restart x-plane saw the update. Updated, I will try.))

After update plugin, on the taxi CTD log and dump files.

Post's attachments

Attachment icon Log.txt 87.17 kb, 203 downloads since 2016-05-18 

Attachment icon x-life.dmp 266.65 kb, 214 downloads since 2016-05-18 

527 Reply by captbullett (edited by captbullett 2016-05-18 21:13:46)

  • captbullett
  • Member
  • Offline
  • Registered: 2015-04-08
  • Posts: 975

Re: X-Life ver 1.0 (rc1, r1, ++)

Metallist wrote:
Metallist wrote:
captbullett wrote:

good day
you need to up date and only replace the  .xpl  files ...
Brian

Thank you, just now after restart x-plane saw the update. Updated, I will try.))

After update plugin, on the taxi CTD log and dump files.

Up-date you A330 as it to has been up-dated for X-Life 

http://jardesign.org/forum/viewtopic.php?id=1997

Brian

528 Reply by laohu314

  • laohu314
  • Member
  • Offline
  • Registered: 2016-01-03
  • Posts: 677

Re: X-Life ver 1.0 (rc1, r1, ++)

Wonderful, perfect, flight from KMCO to KATL in the A330 (latest beta) and XL (latest beta).
At KATL I was watching traffic for a while and had 20 aircraft moving at all times, coming and going without any problems.
XL is really becoming the genius add-on we all believed it would be!

iMac5K 27” (2015), i7 4GHz, OSX 10.14.6, 32GB, AMD M395X 4096MB, Saitek X52, TPM, Radio, Switch & Multi, TM MFD, XP11.35r1, FFA320v0.11.2-2305, ToLiSs A319 v1.3.3, JDA320 v3.4r1, JDA330 v3.2r1, XL v4_250719, FM v2.6r2,  GndHdg v.4.010719, Air Plugin v4.8.3,  FWL 2.7.19, 3jFPS-wizard, PI v2.73.06, NOAA v2.4.4, XSPs v2.75, XCL v1.37, BPB v0.47, SAM 1.1.0

529 Reply by Metallist

  • Metallist
  • Member
  • Offline
  • From: ULLI
  • Registered: 2016-01-17
  • Posts: 38

Re: X-Life ver 1.0 (rc1, r1, ++)

captbullett wrote:
Metallist wrote:
Metallist wrote:

Thank you, just now after restart x-plane saw the update. Updated, I will try.))

After update plugin, on the taxi CTD log and dump files.

Up-date you A330 as it to has been up-dated for X-Life 

http://jardesign.org/forum/viewtopic.php?id=1997

Brian

Not sure I understand, I have the A330 version 1.3b1

530 Reply by ryangregory00

  • ryangregory00
  • Member
  • Offline
  • Registered: 2016-05-17
  • Posts: 27

Re: X-Life ver 1.0 (rc1, r1, ++)

Can someone post a picture of how their bluebell aircraft files are supposed to look like in the x life folder.

531 Reply by Metallist (edited by Metallist 2016-05-18 23:02:43)

  • Metallist
  • Member
  • Offline
  • From: ULLI
  • Registered: 2016-01-17
  • Posts: 38

Re: X-Life ver 1.0 (rc1, r1, ++)

The next attempt of the flight and crash again on the taxiing. And moving parallel to the runway ATC asked to hold the position since the runway is busy.

http://jardesign.org/forum/img/m/2023/t/p1aj31hqvsir1qfcna7ddphol3.jpg

Post's attachments

Attachment icon bbox_log.txt 4.64 kb, 174 downloads since 2016-05-18 

Attachment icon Log.txt 66.72 kb, 299 downloads since 2016-05-18 

Attachment icon x-life.dmp 279.14 kb, 223 downloads since 2016-05-18 

532 Reply by ryangregory00 (edited by ryangregory00 2016-05-19 01:32:41)

  • ryangregory00
  • Member
  • Offline
  • Registered: 2016-05-17
  • Posts: 27

Re: X-Life ver 1.0 (rc1, r1, ++)

how do i get rid of the original x life aircraft?

Post's attachments

Attachment icon Log.txt 30.31 kb, 247 downloads since 2016-05-18 

533 Reply by captbullett

  • captbullett
  • Member
  • Offline
  • Registered: 2015-04-08
  • Posts: 975

Re: X-Life ver 1.0 (rc1, r1, ++)

Metallist wrote:

The next attempt of the flight and crash again on the taxiing. And moving parallel to the runway ATC asked to hold the position since the runway is busy.

http://jardesign.org/forum/img/m/2023/t/p1aj31hqvsir1qfcna7ddphol3.jpg

Good day,
You must hold and the steps are
1) hold and report to ATC that you are Holding.
2) open the radar screen and set to 50NM so you can see the other aircraft around you,
   see what aircraft are taking off and landing on the runway you are about to use.
3) open the ATC widget again if you do not here from TC within a 1-2 minute window but still wait otherwise you will get a CTD because you have broken the string in the ATC programming.

you have to let the X-Life programming work if you do not wait to get cleared you will not go any farther than a CTD.
Brian

534 Reply by captbullett (edited by captbullett 2016-05-19 03:12:53)

  • captbullett
  • Member
  • Offline
  • Registered: 2015-04-08
  • Posts: 975

Re: X-Life ver 1.0 (rc1, r1, ++)

ryangregory00 wrote:

how do i get rid of the original x life aircraft?

Good day,
Now that you sent the log.txt I can see that you do not have the Bluebell aircraft loaded into you computer right so, you can either send a screenshot of your file-tree and where you put the bluebell aircraft files so we can take a look at them here or you can Skype jAR or you can put a tech support ticket in.

Just not maybe that easy but easy enough to get started to get your bluebell installed.

oh quick question so I can better serve you are you over 18

Brian

535 Reply by Dewald

  • Dewald
  • Member
  • Offline
  • Registered: 2016-02-01
  • Posts: 55

Re: X-Life ver 1.0 (rc1, r1, ++)

ryangregory00 wrote:

how do i get rid of the original x life aircraft?

Download the 3 Bluebell files.
The link is a few pages back on here.

Folders should be like this

?:/X-Plane 10/Custom Data/Bluebell XL/Custom
                                                         /PackA
                                                         /PackB
                                                         /PackG
                                                         /PackJ
                                                         /PackP

536 Reply by Dewald (edited by Dewald 2016-05-19 07:11:10)

  • Dewald
  • Member
  • Offline
  • Registered: 2016-02-01
  • Posts: 55

Re: X-Life ver 1.0 (rc1, r1, ++)

Hi guys

Probably a stupid question.
Can I simply add more Bluebell packs to vary the AI airplanes even more?
Or -- Even add some of the other packs and liveries available on org.

Thanks
Dewald

537 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: X-Life ver 1.0 (rc1, r1, ++)

Metallist wrote:
Metallist wrote:
captbullett wrote:

good day
you need to up date and only replace the  .xpl  files ...
Brian

Thank you, just now after restart x-plane saw the update. Updated, I will try.))

After update plugin, on the taxi CTD log and dump files.


Thanks! Will check!

Please read a FAQ before you post a bug http://support.jardesign.org

538 Reply by J.A.Romanov

  • J.A.Romanov
  • J.A.Romanov
  • Admin
  • Offline
  • Registered: 2015-02-15
  • Posts: 2,885

Re: X-Life ver 1.0 (rc1, r1, ++)

ryangregory00 wrote:

Can someone post a picture of how their bluebell aircraft files are supposed to look like in the x life folder.

How_to_install is always include into Bluebell ZIP

Please look at!

Please read a FAQ before you post a bug http://support.jardesign.org

539 Reply by Dewald (edited by Dewald 2016-05-19 08:27:37)

  • Dewald
  • Member
  • Offline
  • Registered: 2016-02-01
  • Posts: 55

Re: X-Life ver 1.0 (rc1, r1, ++)

It is not supposed to be in the X-Life folder.
Check 4 posts up.

J.A.Romanov wrote:
ryangregory00 wrote:

Can someone post a picture of how their bluebell aircraft files are supposed to look like in the x life folder.

How_to_install is always include into Bluebell ZIP

Please look at!

540 Reply by Metallist (edited by Metallist 2016-05-19 17:15:19)

  • Metallist
  • Member
  • Offline
  • From: ULLI
  • Registered: 2016-01-17
  • Posts: 38

Re: X-Life ver 1.0 (rc1, r1, ++)

captbullett wrote:
Metallist wrote:

The next attempt of the flight and crash again on the taxiing. And moving parallel to the runway ATC asked to hold the position since the runway is busy.

http://jardesign.org/forum/img/m/2023/t/p1aj31hqvsir1qfcna7ddphol3.jpg

Good day,
You must hold and the steps are
1) hold and report to ATC that you are Holding.
2) open the radar screen and set to 50NM so you can see the other aircraft around you,
   see what aircraft are taking off and landing on the runway you are about to use.
3) open the ATC widget again if you do not here from TC within a 1-2 minute window but still wait otherwise you will get a CTD because you have broken the string in the ATC programming.

you have to let the X-Life programming work if you do not wait to get cleared you will not go any farther than a CTD.
Brian

Good day,

I hold and report to ATC. Waited until the plane landed on the runway  right with me. After landing the plane turned left on taxiway to my right in the screenshot. I got permission to continue taxiing and when I began at odds with the plane to my right, a cras sim.

541 Reply by Dewald

  • Dewald
  • Member
  • Offline
  • Registered: 2016-02-01
  • Posts: 55

Re: X-Life ver 1.0 (rc1, r1, ++)

Oh man. CTD when starting right engine on Rotate MD80.

Post's attachments

Attachment icon Log.txt 52.05 kb, 219 downloads since 2016-05-19 

Attachment icon x-life.dmp 128.9 kb, 173 downloads since 2016-05-19 

542 Reply by Dewald (edited by Dewald 2016-05-19 15:36:23)

  • Dewald
  • Member
  • Offline
  • Registered: 2016-02-01
  • Posts: 55

Re: X-Life ver 1.0 (rc1, r1, ++)

Oops I did it again la la la la laaaa la la la.
Crash while taxiing to gate at LIRF.
See attached.

PS! I think I caused it as described above w.r.t. holding as per ATC.

Post's attachments

Attachment icon Log.txt 124.99 kb, 246 downloads since 2016-05-19 

Attachment icon x-life.dmp 139.76 kb, 147 downloads since 2016-05-19 

543 Reply by polyefko

  • polyefko
  • Member
  • Offline
  • Registered: 2015-09-06
  • Posts: 11

Re: X-Life ver 1.0 (rc1, r1, ++)

Love X-Life....use it daily. Also use World Traffic (which may be my problem).
At airport gates I have planes sitting on top of other planes all over the airport. It is because I have WT ENABLED at the same airport? If I UNABLE WT will that just leave X-Life traffic and no planes sitting on top of other planes?

544 Reply by ilankrt

  • ilankrt
  • Member
  • Offline
  • Registered: 2015-10-20
  • Posts: 774

Re: X-Life ver 1.0 (rc1, r1, ++)

polyefko wrote:

Love X-Life....use it daily. Also use World Traffic (which may be my problem).
At airport gates I have planes sitting on top of other planes all over the airport. It is because I have WT ENABLED at the same airport? If I UNABLE WT will that just leave X-Life traffic and no planes sitting on top of other planes?

probably yes, try it out and you are smarter...
There are some airports that have their own aircraft library you have to remove.

X-Plane 11.30r3 | iMac27 OSX Mojave 14.10.4, | Samsung ultra-wide screen 49-inch | Saitek equipment | MFG pedals |Gladiator Joystick | Plugins: GndHandling, RWC, SMP, SoundM, X-Life, BetterPushback, AutoGate, SoundMaxx, X-ATC-chatter, X-Camera | iPad 12.9, iPad Air 9.7  | Airliner: JAR A320/A330, FF A350XWB, FF B767, SSG B747-8 inter, Epic1000 new, TBM900  http://ilankrt1.blogspot.co.il

545 Reply by Watauga

  • Watauga
  • Member
  • Offline
  • From: KBNA
  • Registered: 2016-04-22
  • Posts: 82

Re: X-Life ver 1.0 (rc1, r1, ++)

Flight from LIRF to LFMN no CTD with Xlife 1.17b and Bluebell aircraft. 

At LFMN was cleared to land on 04L with the wind at 300 degrees.  Initial ATIS at LIRF indicated runway 4L will be used at LFMN.  ATIS changed landing runways to 22 R or L.  X-Life did not change designated runway for landing to 22 R or L.  Is X-Life suppose to change the runways based on wind direction?

Post's attachments

Attachment icon Log.txt 205.65 kb, 177 downloads since 2016-05-19 

546 Reply by ilankrt (edited by ilankrt 2016-05-19 18:39:55)

  • ilankrt
  • Member
  • Offline
  • Registered: 2015-10-20
  • Posts: 774

Re: X-Life ver 1.0 (rc1, r1, ++)

Watauga wrote:

Flight from LIRF to LFMN no CTD with Xlife 1.17b and Bluebell aircraft. 

At LFMN was cleared to land on 04L with the wind at 300 degrees.  Initial ATIS at LIRF indicated runway 4L will be used at LFMN.  ATIS changed landing runways to 22 R or L.  X-Life did not change designated runway for landing to 22 R or L.  Is X-Life suppose to change the runways based on wind direction?

This is an interesting question, how XL program is choosing runways, randomly or based on actual weather data.I got at least 2 times advice to land on RWY in wind direction and several advices to land on RNAV instead of proclamed ILS RWY...

X-Plane 11.30r3 | iMac27 OSX Mojave 14.10.4, | Samsung ultra-wide screen 49-inch | Saitek equipment | MFG pedals |Gladiator Joystick | Plugins: GndHandling, RWC, SMP, SoundM, X-Life, BetterPushback, AutoGate, SoundMaxx, X-ATC-chatter, X-Camera | iPad 12.9, iPad Air 9.7  | Airliner: JAR A320/A330, FF A350XWB, FF B767, SSG B747-8 inter, Epic1000 new, TBM900  http://ilankrt1.blogspot.co.il

547 Reply by Denco (edited by Denco 2016-05-19 19:04:15)

  • Denco
  • Banned
  • Offline
  • Registered: 2016-05-19
  • Posts: 2

Re: X-Life ver 1.0 (rc1, r1, ++)

I would really like to buy this product, but first I have a few question.

1. Does ATC use speech recognition and can I use my IVONA voices for it?
2. Why only TCAS planes for atc. Will we ever get an ATC for all panes? This one is the one that is preventing me from buying it since I mostly fly the 737 200.

I would also like to thank you for the free traffic plugin.

Regards

548 Reply by ryangregory00

  • ryangregory00
  • Member
  • Offline
  • Registered: 2016-05-17
  • Posts: 27

Re: X-Life ver 1.0 (rc1, r1, ++)

Can someone post their pictures on how their bluebell aircraft library and x life are organized?

549 Reply by lanmancz (edited by lanmancz 2016-05-19 20:16:33)

  • lanmancz
  • Member
  • Offline
  • From: LKTB
  • Registered: 2016-05-19
  • Posts: 33

Re: X-Life ver 1.0 (rc1, r1, ++)

Hello,
it seems that X-Life ATC is using the captain's altimeter to get the altitude (perhaps also other in-cockpit instruments to get the other data). The problem with this is that if you have an instrument failure (like I had today) the ATC gets stuck without data. While I was able to fly the plane using the FO's and backup instruments the ATC still thought I was at 500ft.

Also, since I already registered to report this :-), I'd like to make a feature request. It would be nice if we would be able to request runway change for takeoff and landing and also request altitude change.

550 Reply by kurtisdepree

  • kurtisdepree
  • New member
  • Offline
  • Registered: 2016-05-19
  • Posts: 1

Re: X-Life ver 1.0 (rc1, r1, ++)

I am wondering if you can customize the airplanes you see. I love the add-in but if I could set a certain number of aircraft to each airline, it would be even better.